TURBO GP-BASIC 2530940 - Caterpillar

Illustration 4 g06232329
(18) Hydraulic Oil Temperature Gauge
(19) Torque Converter Temperature Gauge
(20) Engine Coolant Temperature Gauge
(21) Machine Mainfall
(22) Fuel Level Gauge
(23) Lower Banner
(24) Machine Cross SlopeGauges
Hydraulic Oil Temperature Gauge (18)
Table 1
Needle Indicator Minimum (0%) Nominal (50%) Maximum (100%) Red Zone
Temperature 45° C (113° F) 69° C (156° F) 117° C (243° F) 95° C (203° F)
Torque Converter Temperature Gauge (19)
Table 2
Needle Indicator Minimum (0%) Nominal (50%) Maximum (100%) Red Zone
Temperature 45° C (113° F) 97° C (207° F) 145° C (293° F) 129° C (264° F)
Engine Coolant Temperature Gauge (20)
Table 3
Needle Indicator Minimum (0%) Nominal (50%) Maximum (100%) Red Zone
Temperature 45° C (113° F) 84° C (183° F) 116° C (241° F) 113° C (235° F)
Fuel Level Gauge (22)
Table 4
Bar Indicator Minimum: 0% Maximum: 100% Indicator ON: 10% Indicator OFF: 18% Machine Mainfall (21)
Positive Slope - 99.0% through 0.5%
Neutral Slope - -0.4% through 0.4%
Negative Slope - -0.5% through -99.0%Machine Cross Slope (24)
Positive Cross Slope - 99.0% through 0.5%
Neutral Cross Slope - -0.4% through 0.4%
Negative Cross Slope - -0.5% through -99.0%Top Banner
The top banner shows the Actual Gear, Engine Speed, and Bi-Directional Gear settings. Overspeed warnings will be indicated with a yellow or red background color change behind the Engine Speed.
Illustration 5 g03818047
(25) Actual Gear and Mode
(26) Engine Speed
(27) Bi-Directional Gear SettingsBottom Banner
The Service Hour Meter is shown in the bottom banner during normal machine conditions. The bottom banner is also the designated area for information and diagnostics pop-up messages. For additional information, refer to Systems Operation, "Pop-Up Messages" .
Illustration 6 g03851541
(28) Time Display
(29) Service Hour Meter