TURBO GP-BASIC 2912126 - Caterpillar

Illustration 1 g01253183
Do not use an air wrench in order to tighten the housing assembly.
Pressure setting of the bypass valve ... 345 kPa (50 psi) (1) 7M-1297 Spring Length under test force ... 50.8 mm (2.00 inch) Test force ... 176 14 N (39.5 3.2 lb) Free length after test ... 75.7 mm (2.98 inch) Outside diameter ... 22.35 mm (0.880 inch) (2) 133-2198 Spring Length under test force ... 54.41 mm (2.142 inch) Test force ... 58.18 2.91 N (13.079 0.654 lb) Free length after test ... 68.95 mm (2.715 inch) Outside diameter ... 16.00 mm (0.623 inch) (3) Torque for sensor ... 80 10 N m (60 7 lb ft) (4) Lubricate the O-ring seal with the lubricant that is being filtered. (5) Torque for base assembly ... 55 5 N m (40 4 lb ft)