TURBO G 2M5406 - Caterpillar

Drain the water and the fuel into suitable containers. 1. Remove sight gauge (1).2. Remove two elbows (2) [top & bottom of gauge (1)]. 3. Loosen two clamps (3).4. Disconnect hose (4).5. Remove pipe and elbow assembly (5). 6. Disconnect two fuel lines (6). Cap or plug immediately. 7. Attach Tool (A), chains and a suitable lifting device as shown.8. Move the water and fuel tank up and forward approximately 10.2 mm (4.0 inch) and disconnect two wire assemblies (7) (not shown).9. Carefully lift the water and fuel tank up and away from the machine. The weight of the water and fuel tank is 1070 kg (2378 lb). For installation of the water and fuel tank, reverse the removal steps.10. Fill the water and fuel tank to the proper level.