TURBO GP-BASIC 5590882 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1U-7600     Slide Hammer Puller     1    
B     9U-6278     Adapter     1    Start By:
Remove the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00652319
Remove bolt (1) and the washer that secures the clamp (2) to the cylinder head assembly.
Remove the clamp (2) that secures the fuel injection nozzle (3) in position in the cylinder head assembly. Note: Put caps or plugs on all openings immediately in order to prevent contamination in the fuel system.Note: Mark the clamp for later installation.
Install Tool (B) (not shown) to the fuel injection nozzle.Note: Tool (B) is installed at the connection (4) for the fuel injection lines.
Connect Tool (A) (not shown) to Tool (B) in order to carefully remove fuel injection nozzle (3) .Note: Align the centerline of Tool (A) with the extended centerline of fuel injection nozzle (3). This procedure will help prevent distortion of the fuel injection nozzle which can cause the fuel injection nozzle to bend or break.
Remove the seat washer from the fuel injection nozzle.