TURBOCHARGER GP 1068274 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     185-3630     Strap Wrench As     1    
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01156941
Disconnect hose (8) and drain the water separator.
Turn valve (6) to the OFF position.
Use Tooling (A) to remove filter (7) .
Disconnect hose assemblies (1) and (4) .
Disconnect harness assembly (5) .
Remove bolts (3) and filter base (2) .Installation Procedure
Table 2
Required Tools    
Tool    Part Number    Part Description    Qty    
A     185-3630     Strap Wrench As     1    
Illustration 2 g01156941
Position filter base (2) and install bolts (3) .
Connect harness assembly (5) .
Connect hose assemblies (1) and (4) .
Use Tooling (A) to install filter (7) .
Turn valve (6) to the ON position.
Connect hose (8) .
Prime the fuel system.