10R9575 TURBOCHARGER GP Caterpillar parts
Rating:
Alternative (cross code) number:
CA10R9575
10R-9575
10R9575
CA10R9575
10R-9575
10R9575
Weight: 22 pounds 10 kg.
Related part:
2359694
TURBO GP-BASIC
10R9575
R
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
216-8685 2168685 2674A402 10R9567 10R9575 Turbocharger GT3571S Turbo for 3056E Excavator M316C M318C M322C 924G 924GZ 928G 930G
OfkZynodor Part Name:Turbocharger Turbo || Part Number:216-8685 2168685 2674A402 10R9567 10R9575 || Application:Turbocharger GT3571S Turbo for 3056E Excavator M316C M318C M322C 924G 924GZ 928G 930G || Please make sure to carefully compare the photos and check the part numbers before making the purchase. If you are unable to confirm your engine model or part number, please leave us a message and we will assist you in confirming that the product you purchase is the one you need. || Your order is not merely a single purchase but the beginning of a cooperative journey, aiming to ensure the safe and smooth operation of your vehicle. We are proud to offer you reliable precision engineering components and unparalleled services.
OfkZynodor Part Name:Turbocharger Turbo || Part Number:216-8685 2168685 2674A402 10R9567 10R9575 || Application:Turbocharger GT3571S Turbo for 3056E Excavator M316C M318C M322C 924G 924GZ 928G 930G || Please make sure to carefully compare the photos and check the part numbers before making the purchase. If you are unable to confirm your engine model or part number, please leave us a message and we will assist you in confirming that the product you purchase is the one you need. || Your order is not merely a single purchase but the beginning of a cooperative journey, aiming to ensure the safe and smooth operation of your vehicle. We are proud to offer you reliable precision engineering components and unparalleled services.
216-8685 2168685 2674A402 10R9567 10R9575 Turbocharger GT3571S Turbo for 3056E Excavator M316C M318C M322C 924G 924GZ 928G 930G
TuneCrumph Part Name:Turbocharger Turbo || Part Number:216-8685 2168685 2674A402 10R9567 10R9575 || Application:Turbocharger GT3571S Turbo for 3056E Excavator M316C M318C M322C 924G 924GZ 928G 930G || Attention: Dear buyers, precise matching of auto parts is the prerequisite for safe installation! To avoid the problems such as returns, exchanges or installation hazards caused by incorrect model selection, please carefully read and verify the model before placing your order. Thank you for your support! || NOTE:We are fully aware that your satisfaction is the driving force for the growth of our brand. Thank you for giving us the opportunity to serve you. If there is anything we haven't covered, please give us your feedback directly. Your suggestions are extremely precious to us!
TuneCrumph Part Name:Turbocharger Turbo || Part Number:216-8685 2168685 2674A402 10R9567 10R9575 || Application:Turbocharger GT3571S Turbo for 3056E Excavator M316C M318C M322C 924G 924GZ 928G 930G || Attention: Dear buyers, precise matching of auto parts is the prerequisite for safe installation! To avoid the problems such as returns, exchanges or installation hazards caused by incorrect model selection, please carefully read and verify the model before placing your order. Thank you for your support! || NOTE:We are fully aware that your satisfaction is the driving force for the growth of our brand. Thank you for giving us the opportunity to serve you. If there is anything we haven't covered, please give us your feedback directly. Your suggestions are extremely precious to us!
216-8685 2168685 2674A402 10R9567 10R9575 Turbocharger GT3571S Turbo for 3056E Excavator M316C M318C M322C 924G 924GZ 928G 930G
ZHLQUAMYTH Part Name:Turbocharger Turbo || Part Number:216-8685 2168685 2674A402 10R9567 10R9575 || Application:Turbocharger GT3571S Turbo for 3056E Excavator M316C M318C M322C 924G 924GZ 928G 930G || Friendly tips:This product boasts excellent performance, superior quality, reliability and safety. It is your reliable choice. || Your choice holds great significance for us. Not only do we sell products, but we also strive to provide "safety and performance assurance" for your beloved car. Your satisfaction is our eternal pursuit.We will offer the most sincere service.
ZHLQUAMYTH Part Name:Turbocharger Turbo || Part Number:216-8685 2168685 2674A402 10R9567 10R9575 || Application:Turbocharger GT3571S Turbo for 3056E Excavator M316C M318C M322C 924G 924GZ 928G 930G || Friendly tips:This product boasts excellent performance, superior quality, reliability and safety. It is your reliable choice. || Your choice holds great significance for us. Not only do we sell products, but we also strive to provide "safety and performance assurance" for your beloved car. Your satisfaction is our eternal pursuit.We will offer the most sincere service.
For full view, you need register
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 4C-3601 Piston Ring Expander 1
C 4C-8165(1)
or
208-7630(2) Piston Ring Groove Gauge 1
(1) Use with C11 Engines only
(2) Use with C13 Engines only
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Verify correct assembly of the pistons and the connecting rods. Ensure that the etched numbers on the rod and the rod cap are in the correct positions. The etched number on the rod and the rod cap correspond to the cylinder in which it should be installed.
Note: The word "FRONT" may be stamped on the pistons in some engines. Ensure that the word "FRONT" is toward the front of the engine when the piston is installed. The etched number on the connecting rod must be on the right side of the engine in the corresponding cylinder. Ensure that the piston and the etched number are correctly positioned.Note: Inspect condition of all piston ring grooves. Use Tooling (C) to verify diameter of top ring groove. Refer to Tool Operating Manual, NEHS0840 for additional information.
Illustration 1 g01319591Note: Ensure that new bearing (4) is installed prior to assembly of the piston.Note: Careful handling is required for fractured connecting rods. Fractured faces for the connecting rod and connecting rod cap should not be placed on any surface. The connecting rod and the connecting rod cap should be placed on the sides in order to prevent damage. When possible, the connecting rod and the connecting rod cap should be bolted together in order to prevent damage.
Place piston (2) on connecting rod (5). Apply clean engine oil to piston pin (6) and install the piston pin.
Install retaining rings (3).
Check the clearance between the ends of piston rings (1). Refer to Specifications, "Piston and Rings". Note: The oil ring must be installed over the spring with the end gap 180 degrees from the oil ring spring joint.
Install the oil control piston ring. The ends of the spring should be rotated 180 degrees from the ring end gap.
Install the intermediate piston ring with the side marked "UP-2" toward the top of the piston. Use Tooling (A) in order to install the ring.
Install the top piston ring with the side marked "UP-1" toward the top of the piston. Use Tooling (A) in order to install the ring.
After installation, all three of the piston rings should be placed 120 degrees away from each other. End By:
Install the pistons and the connecting rods. Refer to Disassembly and Assembly, "Pistons and Connecting Rods - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 4C-3601 Piston Ring Expander 1
C 4C-8165(1)
or
208-7630(2) Piston Ring Groove Gauge 1
(1) Use with C11 Engines only
(2) Use with C13 Engines only
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Verify correct assembly of the pistons and the connecting rods. Ensure that the etched numbers on the rod and the rod cap are in the correct positions. The etched number on the rod and the rod cap correspond to the cylinder in which it should be installed.
Note: The word "FRONT" may be stamped on the pistons in some engines. Ensure that the word "FRONT" is toward the front of the engine when the piston is installed. The etched number on the connecting rod must be on the right side of the engine in the corresponding cylinder. Ensure that the piston and the etched number are correctly positioned.Note: Inspect condition of all piston ring grooves. Use Tooling (C) to verify diameter of top ring groove. Refer to Tool Operating Manual, NEHS0840 for additional information.
Illustration 1 g01319591Note: Ensure that new bearing (4) is installed prior to assembly of the piston.Note: Careful handling is required for fractured connecting rods. Fractured faces for the connecting rod and connecting rod cap should not be placed on any surface. The connecting rod and the connecting rod cap should be placed on the sides in order to prevent damage. When possible, the connecting rod and the connecting rod cap should be bolted together in order to prevent damage.
Place piston (2) on connecting rod (5). Apply clean engine oil to piston pin (6) and install the piston pin.
Install retaining rings (3).
Check the clearance between the ends of piston rings (1). Refer to Specifications, "Piston and Rings". Note: The oil ring must be installed over the spring with the end gap 180 degrees from the oil ring spring joint.
Install the oil control piston ring. The ends of the spring should be rotated 180 degrees from the ring end gap.
Install the intermediate piston ring with the side marked "UP-2" toward the top of the piston. Use Tooling (A) in order to install the ring.
Install the top piston ring with the side marked "UP-1" toward the top of the piston. Use Tooling (A) in order to install the ring.
After installation, all three of the piston rings should be placed 120 degrees away from each other. End By:
Install the pistons and the connecting rods. Refer to Disassembly and Assembly, "Pistons and Connecting Rods - Install".
Caterpillar parts catalog:
Parts turbocharger Caterpillar catalog:
Caterpillar
5428128
TURBOCHARGER GP
Caterpillar
Caterpillar
5428126
TURBOCHARGER GP
Caterpillar
Caterpillar
5428125
TURBOCHARGER GP
Caterpillar
Caterpillar
5428124
TURBOCHARGER GP
Caterpillar
Caterpillar
5381399
TURBOCHARGER GP
Caterpillar
Caterpillar
4615030
TURBOCHARGER GP
Caterpillar
Caterpillar
4611107
TURBOCHARGER AS
Caterpillar
Caterpillar
4432984
TURBOCHARGER GP
Caterpillar
Caterpillar
4430326
TURBOCHARGER
Caterpillar
Caterpillar
4243440
TURBOCHARGER GP
Caterpillar
Caterpillar
3763790
TURBOCHARGER GP
Caterpillar
Caterpillar