TURBOCHARGER GP 1216630 - Caterpillar

Illustration 1 g03333815
Table 1
Specification for the 179-1511 Accessory Drive Gp
Item Qty Part Specification Description
1 2 259-4598 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
2 1 7C-3259 Shaft Diameter of new shaft is 105.880 0.020 mm (4.1685 0.0008 inch).
3 1 8N-8210 Adapter As After installation, bore of 127-5400 Bushing is 75.000 0.055 mm (2.9527 0.0022 inch).
Installation depth of the bushing is 1.50 0.50 mm (0.059 0.020 inch).
4 1 116-3242 Idler Gear As After installation, bore of 116-1365 Bearing is 105.970 0.010 mm (4.1720 0.0004 inch).
Installation depth of the bearing is 2.30 0.50 mm (0.091 0.020 inch).
5 1 7C-3258 Thrust Washer Assembly Thickness of 7C-3257 Thrust Washer is 7.00 0.15 mm (0.276 0.006 inch)
Protrusion of dowel is 4.50 0.50 mm (0.177 0.020 inch).
6 1 7N-5874 Auxiliary Drive Shaft Diameter of new auxiliary drive shaft is 74.900 0.015 mm (2.9488 0.0006 inch).
Width of groove in new auxiliary drive shaft is 8.75 0.10 mm (0.344 0.004 inch).
7 2 7N-7539 Thrust Washer Thickness of new thrust washer is 8.50 0.05 mm (0.335 0.002 inch).