1343044 TURBOCHARGER GP Caterpillar parts
3116
Rating:
Alternative (cross code) number:
CA1343044
134-3044
1343044
CA1343044
134-3044
1343044
INDUSTRIAL ENGINE,
Related part:
1343044
TURBO GP-BASIC
0R7107
R
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$39.95
19 Jul 2021
Amazon.com
Tru-Spec Men's BDU Pant, Brown, Medium Short
Tru-Spec 2-Adjustable waist tabs secured with 4 bar-tacks; 4-button fly closure || 2-Front slash pockets and 2-rear inserted pockets with snag proof pocket flaps || 2-Bellowed, 3-pleated cargo pockets with drain holes and snag proof button flaps
Tru-Spec 2-Adjustable waist tabs secured with 4 bar-tacks; 4-button fly closure || 2-Front slash pockets and 2-rear inserted pockets with snag proof pocket flaps || 2-Bellowed, 3-pleated cargo pockets with drain holes and snag proof button flaps
Number on catalog scheme:
1
For full view, you need register
Compatible equipment models: 1343044:
Information:
Illustration 1 g00877335
(1) Mode Scroll Switch (2) Increment / Hold / Clear / Store Switch
Illustration 2 g00878078
(3) Submode Number (4) Accepted Symbol (5) Not Accepted SymbolThe calibration for the minimum propel speed is performed with the engine ON and running at high idle. Always perform both the propel forward and reverse current minimum calibrations.
Turn the key start switch to the ON position. Start the engine and run the engine at high idle.
Check that the alert indicator for the machine ECM on the Caterpillar Monitoring System is NOT flashing.Expected Result: The alert indicator for the machine ECM is FLASHING.Yes - The ECM is reporting a fault at this time. The fault must be corrected prior to performing calibrations. See Troubleshooting, "Diagnostic Code Procedures".No - The machine ECM is not reporting a fault at this time. Proceed to Step 3.
Enter calibration mode (mode 6) of the Caterpillar Monitoring System. In order to enter the calibration mode, press and hold the mode scroll switch (1). Release the switch when "-6-" is showing in the display area.
Enter submode c12. In order to enter the submode, press and hold the Increment / Hold / Clear
