1S9489 TURBOCHARGER AS Caterpillar parts
D353C, D398, D398A
Rating:
Alternative (cross code) number:
CA1S9489
1S-9489
1S9489
CA1S9489
1S-9489
1S9489
Weight: 1 pounds 0 kg.
INDUSTRIAL ENGINE, MARINE ENGINE,
Compatible equipment models: 1S9489:
Information:
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
The power window on the left-hand door may fail on the machines listed above.Solution
Caterpillar is aware of this problem, but a permanent solution has not been identified.
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
As an interim action, follow the procedure below if the power window does not raise or lower when the rocker switch is actuated:
Table 1
Qty New Part Number Part Former Part Number
2 3E-5239 Relay As 231-3930
Illustration 1 g06285778
Cab Arrangement
(A) 222-7892 Rocker Switch
(1) 319-6257 Window Regulator Assembly
(2) 3E-5239 Relay As
Check the power window circuit fuse.
Replace both 231-3930 Relay As with new 3E-5239 Relay As (2) and then check to see if power window functions properly.
If power window still is not working, check function of Rocker Switch (A) and replace if necessary.
If power window still does not function, remove the door trim panel and disconnect 319-6257 Window Regulator Assembly from the window and ensure that the window is not binding by sliding the window up and down in the channel. Reconnect the regulator and check the window operation.
Check for power at window motor when actuating the switch.
If this procedure still does not result in a functioning power window, replace 319-6257 Window Regulator Assembly with new Window Regulator Assembly (1).Note: The motor is equipped with thermal overload protection. Allow time for the motor to reset when troubleshooting.If the power window is still not operational after completing the steps above, please submit a Dealer Solution Network (DSN) ticket, quoting CPI issue number 390721.
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
The power window on the left-hand door may fail on the machines listed above.Solution
Caterpillar is aware of this problem, but a permanent solution has not been identified.
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
As an interim action, follow the procedure below if the power window does not raise or lower when the rocker switch is actuated:
Table 1
Qty New Part Number Part Former Part Number
2 3E-5239 Relay As 231-3930
Illustration 1 g06285778
Cab Arrangement
(A) 222-7892 Rocker Switch
(1) 319-6257 Window Regulator Assembly
(2) 3E-5239 Relay As
Check the power window circuit fuse.
Replace both 231-3930 Relay As with new 3E-5239 Relay As (2) and then check to see if power window functions properly.
If power window still is not working, check function of Rocker Switch (A) and replace if necessary.
If power window still does not function, remove the door trim panel and disconnect 319-6257 Window Regulator Assembly from the window and ensure that the window is not binding by sliding the window up and down in the channel. Reconnect the regulator and check the window operation.
Check for power at window motor when actuating the switch.
If this procedure still does not result in a functioning power window, replace 319-6257 Window Regulator Assembly with new Window Regulator Assembly (1).Note: The motor is equipped with thermal overload protection. Allow time for the motor to reset when troubleshooting.If the power window is still not operational after completing the steps above, please submit a Dealer Solution Network (DSN) ticket, quoting CPI issue number 390721.
Caterpillar SIS machinery equipment:
Caterpillar SIS
D353 & G353 ENGINES 46B00809-01557 »
1S-9489
TURBOCHARGER AS
D353E MARINE ENGINE 47B00409-UP »
1S-9489
TURBOCHARGER AS
D398 ENGINE 66B00700-02048 »
1S-9489
TURBOCHARGER AS
D353 ENGINE 46B01558-UP »
1S-9489
TURBOCHARGER AS
D398B MARINE ENGINE 67B00920-01390 »
1S-9489
TURBOCHARGER AS
D398B MARINE ENGINE 67B00920-01390 »
1S-9489
TURBOCHARGER AS
D398B ENGINE 66B02049-03560 »
1S-9489
TURBOCHARGER AS
D398B ENGINE 66B02049-03560 »
1S-9489
TURBOCHARGER AS
D398B ENGINE 66B03561-UP »
1S-9489
TURBOCHARGER AS
D398B ENGINE 66B03561-UP »
1S-9489
TURBOCHARGER AS
Caterpillar parts catalog:
Parts turbocharger Caterpillar catalog:
6N8464
TURBOCHARGER GP
D398, D398A, D398B
D398, D398A, D398B
6N8458
TURBOCHARGER GP
D353C, D398, D398B
D353C, D398, D398B
7N2515
TURBOCHARGER GP
3306, 571G, 572G, D398, D398B, D7G
3306, 571G, 572G, D398, D398B, D7G
3N1728
TURBOCHARGER GP
D398A
D398A
4N4568
TURBOCHARGER GROUP
3208, D398A
3208, D398A
6V5492
TURBOCHARGER MOUNTING
D398A, D399
D398A, D399
3S4430
TURBOCHARGER ASSEMBLY
D353C, D398, D398A
D353C, D398, D398A
8M1781
TURBOCHARGER ASSEMBLY
D398, D398A
D398, D398A
6L4236
TURBOCHARGER GROUP
D398, D398A
D398, D398A
2N6203
TURBOCHARGER GROUP
D398, D398A
D398, D398A
6L3174
TURBOCHARGER LUBRICATION VALVE GROUP
D398, D398A, G398
D398, D398A, G398
8M1783
TURBOCHARGER ASSEMBLY
D353C, D398, D398A
D353C, D398, D398A
8N2691
TURBOCHARGER GP
D353C
D353C
2P1780
TURBOCHARGER GP
D353C, D398
D353C, D398
6L5685
TURBOCHARGER GP
D353C
D353C