TURBOCHARGER GP 1W7249 - Caterpillar

1W7249 TURBOCHARGER GP Caterpillar parts 3412

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1W7249
1W-7249
1W7249

Weight: 2 pounds 0 kg.

Buy TURBOCHARGER GP 1W7249 Caterpillar genuine, new aftermarket tractor parts with delivery
GEN SET ENGINE,

Compatible equipment models: 1W7249:

GEN SET ENGINE 3412 Caterpillar

Number on catalog scheme:

Caterpillar 1W7249 Parts scheme TURBOCHARGER GP

For full view, you need register

Information:

Illustration 10 g03714639
Disconnect hose assembly (32) .
Illustration 11 g03715099
Disconnect hose assemblies (33) , (34) , (35) and (36) if equipped.
Illustration 12 g03715104
Disconnect electrical connector (37) if equipped.
Illustration 13 g03715107
Disconnect hose assemblies (38) and (39) if equipped.
Illustration 14 g03715108
Remove four bolts (40) (not shown) and remove secondary steering diverter valve (41) if equipped.
Illustration 15 g03715111
Move hoses (9) , (17) and (18) out of the way.
Illustration 16 g03715117
Remove bolt (42) from the clip, on hose (43) .
Illustration 17 g03715728
Disconnect hose assembly (43) and remove.
Illustration 18 g03715119
Remove bolt (44) .
Remove bolt (45) from the clip.
Remove bolts (46) from the clips.
Disconnect hose assembly (48) .
Remove axle breather and hose assembly (47) .
Illustration 19 g03715723
Place spacers between mount on cab and chassis (51) to maintain cab location when removing cab mount (53) .
Loosen six bolts (52) .
Remove bolt (50) .
Remove pin (49) .
Remove six bolts (52) .
Remove cab mount (53) . The weight of cab mount (53) is approximately 35.5 kg (78 lb).
Remove the oscillating axle rear. Refer to Disassembly and Assembly, "Oscillating Axle (Rear) - Remove ".
Illustration 20 g03715727
Install Tooling (A) to the input cover of the transmission.
Attach a suitable lifting device to Tooling (A) and two existing lifting brackets (54) . The weight of the transmission and output transfer gears is approximately 950 kg (2100 lb).
Illustration 21 g03715730
Remove bolt (57) the nut and the washers from each side of rear transmission support (58) .
Remove six bolts (55) and rear transmission support (58) . The weight of the rear transmission support is approximately 34 kg (75 lb).
Remove bolt (56) from clip.
Remove two bolts (59) . Move hose out of the way.
Illustration 22 g03715732
Remove two bolts (60) from the front transmission support.
Repeat Step 49 for the front transmission support on the other side.
Remove the transmission and output transfer gears from the machine.