TURBOCHARGER GP 2289942 - Caterpillar

Do not service the machine while the machine is in remote mode. Failure to place the machine in manual mode for service can result in a crushing hazard. Death or injury may occur if the machine is in remote mode while servicing. Put the machine in manual mode. Verify that the machine is in manual mode prior to servicing the machine.
Do not operate or work on this machine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Personnel who are within the operation area of a remote control machine may be struck by the remote control machine. Being struck by a remote control machine may result in personal injury or death. Clearly mark the operation area for the remote control machine to warn personnel to stay clear of the operation area of the remote control machine. Ensure that personnel have an understanding of the mode indicators on the machine to know when safe to approach the machine.
While operating under active remote control, the machine may move without warning which could result in serious personal injury or death. Maintain a safe distance from the machine when the machine is operated in remote control mode. Personnel who may need to work in the area of a remote control machine must know and understand the external remote control mode indicators, job site procedures, and approach the machine only when it is safe to do so.
Do not enter the area where the remote control machine is operating. Entering the area of a remote control machine while the machine is in remote control may result in serious injury or death. Stay clear of the area where the remote control machine is operating.
Using the remote operator station near strong magnetic fields may cause machine movement without warning when the machine is in remote mode. Machine movement without warning may result in personal injury or death. Keep the remote operator station away from strong magnetic fields.
If communication between the remote control machine and the operator station is lost, the machine will continue to execute the last valid command for 2.1 seconds. After a period of 2.1 seconds, the remote control machine will transition to an immediate stop state. The maximum expected travel distance, on level ground with no load, would be 4.2 m (14 ft) in forward and 5.5 m (18 ft) in reverse. Distances are based on a D10T in second gear forward or in reverse.Personal injury or death may occur if the machine travels into a hazard zone or towards personnel after losing communication.Maintain a safe distance from the machine. Maintain clear line-of-sight with the machine. Understanding the distances stated above, avoid situations that would place the machine in close proximity to the hazard zone, for example, pushing material over a high wall, or operating near infrastructure.
Note: Prior to operation