TURBOCHARGER GP 2372041 - Caterpillar

Table 4
Standard Removal Parts    
Item     Qty     Part Number     Description    
-     1     7X-2621     Bolt    
-     1     8T-4121     Hard Washer    
-     1     5I-4387     Hose As    
-     1     111-0973     Hose As    
Illustration 3 g03407767
Overview of 433-6307 Pilot Lines Gp Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, on all hose assemblies, on all harness assemblies, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. 372-3924 Valve Gp
Illustration 4 g03020180
(1) 255-5607 Control Valve Gp (2) 096-3044 O-Ring Seal (3) 1P-3702 Rectangular Seal (4) 454-6928 Bolt (5) 451-2175 Washer
Install valve (1) onto the main valve. 433-6307 Pilot Lines Gp
Illustration 5 g03407769
(3) 7K-1181 Cable Strap (6) 369-0149 Valve Bracket As (7) 8T-4121 Hard Washer (8) 8T-4191 Bolt
Install bracket as shown.
Illustration 6 g03407855
(1) 4I-5795 Hose As (2) 4I-9522 Marker Band (Yellow) (3) 7K-1181 Cable Strap (4) 087-5759 Hose As (5) 133-5813 Marker Band (Gray)
Illustration 7 g03407856
View from under the main control valve. (1) 4I-5795 Hose As (5) 133-5813 Marker Band (Gray)
Install hoses as shown.
Tighten all hoses and fittings to standard torque.
Check for leaks.