TURBOCHARGER GP 2419064 - Caterpillar

Illustration 1 g02735442
Table 1
Specification for 278-9372 Bucket Linkage Gp
Item Qty Part Specification Description
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all the pin bores and the bushings before assembly. After you assemble the bushings coat all the bores and the bushings with 5P-0960 Grease Cartridge.
1 4 166-1494 Lip Type Seal Lubricate the sealing lip of lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install lip type seals so that lip of the lip type seals do not extend beyond the face of the boss.
2 1 458-0545 Pin Diameter is 79.850 0.040 mm (3.1437 0.0016 inch).
3 2 244-4360 Bushing Inside diameter before assembly is 80.20 0.04 mm (3.157 0.002 inch).
Installation depth is 8.5 0.8 mm (0.33 0.03 inch).
4 2 451-2183 Nut Position the nut (5) to the distance 0.5 mm (0.02 inch) past the end of the bolt. For locking, tighten the nut (4) against the nut (5).
Torque to 175 30 N m (129 22 lb ft).
5 2 451-2183 Nut
6 2 235-7679 Lip Type Seal Lubricate the sealing lip of lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces the outside, as shown. Install lip type seals so that lip of the lip type seals do not extend beyond the face of the boss.
7 2 228-5614 Bushing Inside diameter before assembly is 70.17 0.04 mm (2.763 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
8 2 106-6878 Pin Diameter is 69.850 0.040 mm (2.7165 0.0016 inch).
9 1 458-0543 Pin Diameter is 69.850 0.040 mm (2.7165 0.0016 inch).
10 - - During assembly of linkage group on the machine, rotate the rod end of the bucket cylinder to position the grease fitting away from the stick.