TURBOCHARGER GP 2711736 - Caterpillar

Installation Procedure
Illustration 1 g06341162
(1) Plate 1
(2) Plate 2
(3) Plate 3
(4) Plate 4
Illustration 2 g06341170
(4) Plate 4
(5) 8T-9043 Bolt
(6) 8T-4224 Hard WasherNote: Use standard torque values on the fasteners.
Attach 2 plates (4) to the water manifold with 2 bolts (5) and 2 washers (6) per plate.
Illustration 3 g06341172
(2) Plate 2
(7) 4L-6459 Bolt
(8) 8T-4896 Hard Washer
(9) 6V-8801 NutNote: Line up the external notch on all 3 plates during installation.
Attach 3 plates (2) to the exhaust elbow with 8 bolts (7), 8 washers (8), and 8 nuts (9).Note: Install 1 245-3512 Gasket in between the exhaust elbow and the first plate and 1 245-3512 Gasket on top of the last plate.
Illustration 4 g06341166
(1) Plate 1
(3) Plate 3
(8) 8T-4896 Hard Washer
(10) 5S-7382 Bolt
(11) 3K-6060 Locknut
(12) 8T-2502 Bolt
(13) 7X-0732 Hard Washer
Attach plate (1) to the exhaust elbow with 2 bolts (12), 2 washers (13), and 2 washers (8).Note: The 2 washers (8) go in between the plate (1) and the exhaust elbow.
Attach 2 plates (3) to plate (1) with 2 bolts (10), 3 washers (8), and 2 locknuts (11) per plate.Note: The 2 washers (8) go in between plate (1) and plate (3).
Illustration 5 g06341352
(1) Plate 1
(3) Plate 3
(8) 8T-4896 Hard Washer
(10) 5S-7382 Bolt
(11) 3K-6060 Locknut
(12) 8T-2502 Bolt
Attach plate (1) and the original 272-3475 Bracket to the exhaust elbow with 4 bolts (12) and 4 washers (8).
Attach 2 plates (3) to plate (1) with 2 bolts (10), 2 washers (8), and 2 locknuts (11) per plate.
Illustration 6 g06341355
Complete exhaust shield
Repeat Steps 1 through 6 on the other side.