TURBOCHARGER GP 2751289 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2 Start By:
Remove the turbochargers. Refer to Disassembly and Assembly, "Turbochager - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00615014
Install Tooling (A) in the top of exhaust elbow (1). Attach a suitable lifting device onto Tooling (A). The weight of exhaust elbow (1) is approximately 48 kg (106 lb).
Remove bolts (2). Lift exhaust elbow (1) from the engine.
Illustration 2 g00615016
Remove the bolt and clamp (3). Remove bolts and clamps (4) from each end of tube assembly (5). Remove tube assembly (5). Inspect the seals at the end of tube assembly (5). If the seals are damaged or deteriorated, obtain new seals for assembly.
Illustration 3 g00615017
Attach a suitable lifting device onto support bracket (7). The weight of support bracket (7) is approximately 117 kg (257 lb).
Remove bolts (6). Remove support bracket (7). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 4 g00615017
Attach a suitable lifting device onto support bracket (7). The weight of support bracket (7) is approximately 117 kg (257 lb). Position support bracket (7) onto the engine.
Install bolts (6).
Illustration 5 g00615016Note: Ensure that the seals are installed in the ends of tube (5).
Position tube assembly (5) and install bolts and clamps (4) onto each end of tube assembly (5). Install the bolt and clamp (3).
Illustration 6 g00615014
Install Tooling (A) in the top of exhaust elbow (1). Attach a suitable lifting device onto Tooling (A). The weight of exhaust elbow (1) is approximately 48 kg (106 lb). Position exhaust elbow (1).
Install bolts (2). End By:
Install the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Install".