TURBOCHARGER GP 2776368 - Caterpillar

TYPE="TABLE" @@@-->
Illustration 1 g01099859
When the electric starting motor is viewed from the drive end, the motor rotates in the following direction. ... ClockwiseNo load conditions at 25 °C (77 °F) Minimum speed with no load ... 6900 1800 rpm Maximum current with no load ... 127.5 27.5 amp Voltage ... 11 V (1) Battery terminalA maximum of three cable or wire terminals should be between the nuts. Tighten the nut on the battery terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft) (2) Motor terminal Tighten the nut on the motor terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft) (3) Ground terminal Tighten the nut on the ground terminal to the following torque. ... 30.5 3.5 N m (22 3 lb ft) (4) Ground terminal Tighten the nut on the ground terminal to the following torque. ... 2.25 0.25 N m (20 2 lb in) (5) Switch terminalThe wire terminal that is on the switch terminal must be insulated with heat shrink tubing. Do not use molded terminals. Tighten the nut on the switch terminal to the following torque. ... 2.25 0.25 N m (20 2 lb in) (6) Motor frame terminal Tighten the nut on the motor frame terminal to the following torque. ... 8 3 N m (71 27 lb in)Solenoid
Current draw at 10 V and 25 °C (77 °F) Pull-in windings ... 92.5 7.5 Amp Hold-in windings ... 23 Amp maximum