TURBOCHARGER GP 2890371 - Caterpillar

2890371 TURBOCHARGER GP Caterpillar parts 3516B, PM3516

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2890371
289-0371
2890371

Weight: 56 pounds 25 kg.

Buy TURBOCHARGER GP 2890371 Caterpillar genuine, new aftermarket tractor parts with delivery
GENERATOR SET, POWER MODULE,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

BCXFORK 289-0371 2890371 Turbocharger fits for Caterpillar Engine 3516B

$1,599.00

23 Sep 2024
38.69[17.41] pounds
CN: BCXFORK

BCXFORK 289-0371 2890371 Turbocharger fits for Caterpillar Engine 3516B
BCXFORK Please make sure your old turbocharger number and Part Number match the ones listed in the link before placing your order || Part Number: CA2890371, 289-0371, 2890371 || This item fits for Caterpillar Engine 3516B || Manufacturer Warranty 1 Year

For full view, you need register

Compatible equipment models: 2890371:

GENERATOR SET 3516B

POWER MODULE PM3516 Caterpillar

Information:

Removal Procedure
Start By:
Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the front gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine.
Illustration 1 g01010536
Position the No. 1 piston at the top center of the compression stroke. Refer to Testing and Adjusting, "Finding Top Center Position for No. 1 Piston".
Verify that the timing mark on camshaft gear (1) is aligned with Timing Mark (X) on front housing (3).
Remove bolts (2) and remove camshaft gear (1). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the front gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine.
Illustration 2 g01010536
Align the hole in the back of camshaft gear (1) with the dowel in the adapter. Install camshaft gear (1). Note: Camshaft timing is critical. The timing mark on the camshaft gear must be aligned with the timing mark on the front cover when the No. 1 piston is at the top center of the compression stroke. Refer to Testing and Adjusting, "Gear Group (Front) - Time".
Verify that the timing mark on camshaft gear (1) is aligned with Timing Mark (X) on front housing (3). Note: If the timing marks are not aligned, remove camshaft gear (1) and rotate the camshaft until the timing marks are aligned.
Install bolts (2).
Illustration 3 g02725378
Numerical torque sequence for the camshaft gear. Tighten bolts (1) and (4) again after initial sequence.
Tighten the bolts for the camshaft gear in the numeric sequence illustrated in Illustration 3. Tighten to a torque of 240 40 N m (180 30 lb ft). Tighten bolts (1) and (4) again to a torque of 240 40 N m (180 30 lb ft).
Check the backlash between the camshaft gear and the adjustable idler gear. The backlash should be 0.3556 0.254 mm (0.014 0.010 inch). Refer to Testing and Adjusting, "Gear Group (Front) - Time" for the backlash adjustment procedure. End By:
Install the front cover. Refer to Disassembly and Assembly, "Front Cover - Install".