TURBOCHARGER GP 2890384 - Caterpillar

Disassembly Procedure
Table 1
Required Tools    
Tools     Part Number     Part Description     Qty    
A     148-2700     Lifting Bracket     1    
B     8B-7551     Bearing Puller Gp     1    
5P-4170 Step Plate     1    
8B-7548 Push-Puller     1    
C     1H-3112     Bearing Puller Assembly     1    
5F-7366 Forcing Screw     1    Start By:
Remove the eccentric weight housing. Refer to Disassembly and Assembly, "Eccentric Weight Housing - Remove".
Illustration 1 g00824236
Remove drain plugs (1) from cover (2) .
Illustration 2 g00824237
Remove bolts (3) and washers (4) .
Separate cover (2) from housing (5) .
Illustration 3 g00824238
Remove O-ring seal (6) from housing (5) .
Illustration 4 g00824239
Remove lip seals (7) and (8) from the cover.
Illustration 5 g00824240
Remove bolts (9) and flange (10) .
Illustration 6 g00824241
Remove O-ring seal (11) from flange (10) .
Illustration 7 g00824242
Use Tool (A) to remove eccentric weight (12) from housing (5). The weight of the eccentric weight is approximately 60 kg (132 lb).
Illustration 8 g00824244
Remove bolts (14) and shaft (13) from eccentric weight (12) .
Illustration 9 g01068166
Remove O-ring seal (15) from shaft (13) .
Illustration 10 g00824246
Use Tooling (B) to remove inner race (16) and (17) from eccentric weight (12) .
Illustration 11 g00824247
Use Tooling (C) in order to remove bearing (18) from housing (5) .
Repeat Step 12 in order to remove bearing (18) from cover (2) .