TURBOCHARGER 3176150 - Caterpillar

Illustration 1 g00929044
Inspection points for the walk around inspection (A) Ground level controls (B) Front lights (C) Radiator (D) Engine (E) Hydraulic tank (F) Air cleaner (G) Right front tire (H) Fuel tank (I) Power train (J) Right steering cylinder (K) Right hoist cylinder (L) Right rear tire (M) Rear axle (N) Frame and body (O) Left rear tire (P) Left hoist cylinder (Q) Automatic lubricant reservoir (if equipped) (R) Left steering cylinder (S) Steering frame lock (T) Left front tire (U) Windows
Illustration 2 g01803454
(A) Inspect the ground level controls. Make sure that engine shutdown switch (1) and battery disconnect switch (2) are in the ON position. (B) Inspect the front operating lights for damage. (C) Inspect the radiator. Check for leaks. Remove any debris that could block air flow. Check the coolant level in the radiator sight gauge.
Illustration 3 g01803455
(D) Inspect the engine. Use dipstick (3) to check the oil level in the crankcase of the engine. Check for oil leaks and coolant leaks.
Illustration 4 g01803456
(E) Inspect the hydraulic tank. Check the oil level in the hydraulic tank sight gauge (4) . Inspect the tank for leaks and for damage. Make sure that the filler cap is installed.
Illustration 5 g01803457
(F) Inspect air cleaner (5) . Remove debris that may obstruct the air cleaner. (G) Inspect the right front tire. Check the tire inflation. Inspect the tire treads for damage. Check the wheel for bolts that are loose or missing. Check the final drive for oil leaks.Note: Rust behind a bolt may indicate that the bolt is loose. Shiny metal areas around a bolt may indicate that the bolt is loose. (H) Inspect the fuel tank. Make sure that the filler cap is installed correctly. Look for any leaks or damage to the fuel tank.
Illustration 6 g01125863
(I) Inspect the power train. Check the transmission oil level in sight gauge (6) . Check for leaks from the torque converter and from the transmission. (J) Inspect the right steering cylinder. Look for leaks, cracking, or marks on the chrome. Inspect the articulating hitch, the oscillating hitch, and the center drive shaft. (K) Inspect the right hoist cylinder. Look for leaks, cracking, or marks on the chrome. (L) Repeat procedure (G) for the right rear tire. (M) Inspect the rear axle. Inspect the rear lights for damage. Inspect the dump body pivot points. If equipped with an ejector body, inspect the tailgate pivot points.
Illustration 7 g01803458
(N) Inspect frame (8) and dump body (7) for cracks or damage. If equipped with an ejector body, inspect the ejector body and the tailgate for cracks or damage. (O) Repeat procedure (G) for the rear left tire. (P) Repeat procedure (K) for the left hoist cylinder. (Q) Inspect the automatic lubricant reservoir (if equipped) for leaks. (R) Repeat procedure (J) for the left steering cylinder. (S) Check that the steering frame lock is not installed. The machine will not steer if the steering frame lock is installed. (T) Repeat procedure (G) for the front left tire. (U) Make sure that all the