TURBOCHARGER GP 3740432 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 2P-9697 Plug 3
6J-7366 Flared Cap 3
9S-8927 Plug 1
8S-4950 Cap 1 Note: SERVICE DATA: TOOLING (A) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Shut off the fuel. Refer to Operation and Maintenance Manual, "Fuel System Primary Filter - Clean" for the location of the fuel shutoff valve.
Illustration 1 g00912451
Disconnect hose assemblies (2) and tube assemblies (3) from fuel transfer pump (1).
Illustration 2 g00912452
Remove bolts (4) in order to remove fuel transfer pump (1) and the O-ring seal.
Illustration 3 g00912644
Remove coupling (6) and O-ring seal (5) from fuel transfer pump (1).