TURBOCHARGER OIL LINES 3S6330 - Caterpillar

You must read and understand the warnings and instructions contained in the Safety section of this manual before performing any operation or maintenance procedures.Tracks
Inspect
The pins and bushings in a dry joint can become very hot. It is possible to burn the fingers if there is more than brief contact with these components.
Follow these hints to extend the undercarriage life and to avoid excessive downtime.1. Listen to track squeak or squeal during machine operation. This can indicate a dry point.2. Check for dry joints once a week, immediately after machine operation. After machine operation, lightly touch the end of each track pin or bushing, with the back of your hand. Make a mark on any joint that is very hot to the touch.Consult your Caterpillar dealer's Custom Track Service expert upon detection of dry joints or leaks and/or for track inspection.