TURBOCHARGER 4213007 - Caterpillar

Remove bolts (16). Remove sheet assembly (15) .
Remove the belt. Refer to Operation and Maintenance Manual, "Belt - Inspect/Adjust/Replace".
Illustration 7 g01252688
Remove bolts (17) .
Illustration 8 g01252690
Install Tooling (A). Remove remaining bolts (17) .
Illustration 9 g01252691
Slide crankshaft vibration damper and pulley (18) away from the engine.
Attach a suitable lifting device to crankshaft vibration damper and pulley (18). The weight of crankshaft vibration damper and pulley (18) is approximately 59 kg (130 lb). Remove crankshaft vibration damper and pulley (18) .Installation Procedure
Table 2
Required Tools    
Tool     Part Number     Part Description     Qty    
A     -     Guide Stud
5/8 − 18 by 8 inch     2    
B     4C-5593     Anti-Seize Compound     1    Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Install Tooling (A). Attach a suitable lifting device to crankshaft vibration damper and pulley (18). The weight of crankshaft vibration damper and pulley (18) is approximately 59 kg (130 lb). Position crankshaft vibration damper and pulley (18) on Tooling (A). Remove the suitable lifting device from crankshaft vibration damper and pulley (18) .
Illustration 10 g01252690
Slide crankshaft vibration damper and pulley (18) toward the engine. Apply Tooling (B) to bolts (17). Install bolts (17). Remove Tooling (B).
Illustration 11 g01252688
Apply Tooling (B) to remaining bolts (17). Install remaining bolts (17) .
Install the belt. Refer to Operation and Maintenance Manual, "Belt - Inspect/Adjust/Replace".
Illustration 12 g01252684
Position sheet assembly (15). Install bolts (16) .
Illustration 13 g01252682
Position sheet assembly (13). Install bolts (14) .
Illustration 14 g01252679
Position hose assembly (12). Install bolts (10) .
Position tube (6). Install bolts (11) and (9) .
Illustration 15 g01252677
Position sheet (8). Install bolts (7) .
Illustration 16 g01252676
Connect tube (6) .
Illustration 17 g01252674
Position sheet assembly (4). Install bolts (5) and (1) .
Position sheet assembly (3). Install bolts (2) .End By: Install the left engine enclosure. Refer to Disassembly and Assembly, " Engine Enclosure Group - Remove and Install".