TURBOCHARGER GP 4316516 - Caterpillar

Illustration 8 g03337159
Illustration 9 g03337260
Install elbow (30). Connect V-band clamp (31) and V-band clamp (29).
Tighten V-band clamp (31) to a torque of 8.5 2 N m (75 8 lb in).
Tighten V-band clamp (29) to a torque of 17 2 N m (151 18 lb in).
Repeat Step 7 through Step 9 for the opposite side.
Illustration 10 g03336796
Install bracket (28) and bracket (26). Apply Tooling (C) onto bolts (27), bolts (25) and the washers.
Illustration 11 g03334997
Install bolts (24).
Illustration 12 g03334996
Install bolts (23).
Illustration 13 g03334990
Install bolts (22).
Illustration 14 g03336718
Install exhaust tubes (21).
Illustration 15 g03336711
Connect V-band clamp (20). Install clamp assembly (19). Install bolts (18). Tighten V-band clamp (20) to a torque of 8.5 2 N m (75 18 lb in). Repeat this step for the opposite side.
Illustration 16 g03336706
Install bracket (17). Install bolts (16).
Illustration 17 g03335018
Install bolts (15). Repeat this step for the opposite side.
Illustration 18 g03334987
Install tube assembly (14). Install clips (13). Connect clamp (12). Repeat this step for the opposite side.
Illustration 19 g03334983
Connect V-band clamps (11). Tighten V-band clamps (11) to a torque of 8.5 2 N m (75 18 lb in).
Illustration 20 g03334982
Connect tube assembly (7), clips (8), hose assembly (9), and clips (10).
Illustration 21 g03334978
Illustration 22 g03334979
Connect clips (6). Connect clips (5) and hose assemblies (4). Repeat this step for the opposite side.
Illustration 23 g03334976
Connect clips (3), tube assembly (2), and hose assembly (1).End By:
Install the rear exhaust.