TURBOCHARGER GP 4P9193 - Caterpillar

Smart Boom Disable (If Equipped) / Bucket Auto Return (19)
Note: The smart boom functions are disabled when the generator is active.Smart Boom
SmartBoom Temporary Disable Switch - Press the trigger switch on the front of the right joystick to temporarily override the SmartBoom function. Release the trigger switch to return to the selected SmartBoom function.Note: Refer to this Operation and Maintenance Manual, "Smartboom Control" for additional information.Bucket Auto Return
Press the switch to move the Tilt-Rotator system to a predefined home position. Press and hold the switch to allow operator to run the Tilt-Rotator function until the home position is reached. The home position can be set by the operator through the monitor.Note: The default home position is zero degree for tilt angle and rotation angle.Heavy Lift Mode (20)
Heavy Lift Mode - Press the lower right switch on the back of the right joystick to activate heavy lift function.Note: Once the heavy lift function is activated, the heavy lift function will only be available for 60 seconds. After 60 seconds, the lifting capabilities will return to normal working conditions.This work mode increases the relief pressure in the hydraulic circuit, which increases the hydraulic force that is available for lifting operations. The cylinder speed is slower when this mode is selected.Note: During normal excavation work, the heavy lift control must be in the OFF position.Grapple Switch Override (21)
Press the switch to temporarily disable the grapple switch function.Note: The bucket cylinder is controlled by the right joystick when the grapple switch override is pressed. The override is only active when the grapple switch override is pressed.Manual Low Idle (22)
Manual Low Idle - Press the lower left switch on the back of the right joystick to activate low engine speed.Note: The engine speed will return to the original engine speed setting if the machine resumes operation, or the position of the engine speed dial changes.The manual low idle allows the operator to reduce the rpm without touching the engine speed dial. This feature is useful while the operator is waiting for a truck.Thumb Wheel Control (23)
Joystick functions are configured by your Cat dealer. The active function of the joystick will be displayed on the monitor.