TURBOCHARGER GP 4W1134 - Caterpillar

4W1134 TURBOCHARGER GP Caterpillar parts 3208

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4W1134
4W-1134
4W1134

Weight: 0.75 pounds 0 kg.

Buy TURBOCHARGER GP 4W1134 Caterpillar genuine, new aftermarket tractor parts with delivery
INDUSTRIAL ENGINE, TRUCK ENGINE,

Cross Reference:

CATERPILLAR 0R5488, 4W1134, 7W2875, GARRETT 466010-0006, 466010-6,

Compatible equipment models: 4W1134:

INDUSTRIAL ENGINE 3208

TRUCK ENGINE Caterpillar

Number on catalog scheme: 1

Caterpillar 4W1134 Parts scheme TURBOCHARGER GP

For full view, you need register

Information:

Test For An Open Circuit
Table 1
Troubleshooting Test Steps Values Results
1. Identify Open Circuit
A. Identify the connectors and the wire numbers of the suspect circuits. Use the Electrical System Schematic of the machine to identify the circuits.
B. Turn the key start switch and the disconnect switch OFF.
C. Disconnect the component and the ECM from the wiring harness.
D. At one of the disconnected harness connections, place a jumper wire from the contact of the suspect wire to frame ground.
E. At the other connector of the machine harness, use the multimeter probes to measure the resistance from the contact of the suspect wire to frame ground.
The resistance is less than 5 Ω. OK - The harness circuit is correct.
STOP
NOT OK - The resistance is greater than 5K Ω. There is an open in the machine harness.
Repair: Repair or replace the machine harness.
Note: A resistance that is greater than 5 Ω but less than 5K Ω would indicate a loose connection or a corroded connection in the circuit. A resistance measurement that is greater than 5K Ω would indicate an open in the circuit.
STOP