TURBOCHARGER GP 5191190 - Caterpillar

5191190 TURBOCHARGER GP Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5191190
519-1190
5191190

Buy TURBOCHARGER GP 5191190 Caterpillar genuine, new aftermarket tractor parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

$94.60

21 Aug 2023

LT: Roberto Parts L

Radiator Upper Hose PCH503200
Namz Compatible with Land Rover (LR) || Replacement for RR L322 model(-s) || OEM part number reference: PCH503200 || If you are unsure if this is correct item for your vehicle, please contact us via seller message and indicate that you are reffering to the item no: PCH503200 Need other item, but are unable to find it? You can also contact seller asking for help, please indicate what kind of item you are looking for.

Number on catalog scheme:

Caterpillar 5191190 Parts scheme TURBOCHARGER GP

For full view, you need register

Information:

Illustration 8 g03362868
Illustration 9 g03362922
Use Tooling (B) to loosen Packing nut (10). Rotate pinion (6) to remove plunger (4). Use a suitable spacer and pony rod (9) to remove plunger (4). Attach a suitable lifting device to plunger (4). Refer to Table 2 for the approximate weight of plunger (4) .
Illustration 10 g03406757
Use Tooling (B) to remove packing nut (10). Remove packing nut (10), lantern ring (14), V-notch ring (13), header and pressure rings (12), and junk ring (11) .
Illustration 11 g03362929
Remove wiper seal (15) from packing nut (10) .Installation Procedure
Illustration 12 g03406757
Install junk ring (11), header and pressure rings (12), V-notch ring (13), lantern ring (14), and packing nut (10). Tighten packing nut (10) by hand.
Illustration 13 g03362922
Apply a thin layer of Tooling (C) to the outer surface of plunger (4). and inner surface of the installed packing. Attach a suitable lifting device to plunger (4). Refer to Table 2 for the approximate weight of plunger (4). Use a suitable hammer and a suitable brass punch to install plunger (4) .
Illustration 14 g03362929
Install wiper seal (15) with the o-ring facing out towards the power end, into packing nut (10) .
Illustration 15 g03369636
Use Tooling (B) to install packing nut (10). Install packing nut (10).
Illustration 16 g03362924
Illustration 17 g03369696
Rotate pinion (6) to align pony rod (9) and plunger (4) .
Apply Tooling (F) to the threads of bolts (8). Install plunger clamp (7) and bolts (8) .
Illustration 18 g03493318
Grooveless valve retainer (5) .
Install valve retainer (5) .
Illustration 19 g03362865
Install suction cover seal (3) onto cover (2). Apply Tooling (C) to suction cover seal (3) before installing cover (2) .
Illustration 20 g03369836
Install suction cover (2) .
Illustration 21 g03884777
Apply Tooling (D) to the threads of retaining nut (1). Use Tooling (E) to tighten retaining nut (1) to a torque of 3254 N m (2400 lb ft).