TURBOCHARGER GP 5288347 - Caterpillar

1. Cut the tie-wrap, and disconnect two electrical connections (1).2. Disconnect fuel line (2). Cap or plug immediately.3. Remove four bolts (4) and washers.4. Remove assembly burner group (3). 5. Left extender assembly burner group (3) upon removal. For installation of the burner group, reverse the removal steps.Disassemble & Assemble Burner Group
Start By:a. remove burner group 1. Remove two bolts (2), and separate blower motor assembly (1) from upper chamber assembly (3) and fuel nozzle group (4). 2. Disassemble fuel nozzle group (4) using the following procedure: A. Loosen setscrew (6), and remove flame ring (5). When installing flame ring, position the flame ring 1.5 to 3.1 mm (.060 to .125 in) behind the nozzle.B. Remove nozzle (8).C. Remove adapter (9) from check valve (7).D. Remove check valve (7) from pipe (10). For assembly of the burner group, reverse the disassembly steps.End By:a. install burner group