5288388 TURBOCHARGER GP Caterpillar parts
Rating:
Alternative (cross code) number:
CA5288388
528-8388
5288388
CA5288388
528-8388
5288388
Weight: 158 pounds 71 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Brake X Rear Brake Pads and Rotors Kit with brake caliper compression tool replacement for 2004-2017 Nissan Quest | ARES Semi Coated Rotors and Alpha Ceramic Brake Pads
Brake X Get The Right Fit: The rear replacement brakes and rotors kit are built for 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Quest (***Fits Models with 12.13 inch (308mm) Rear Rotor Outside Diameter ONLY!!! Measure the Outside Diameter to Ensure Correct Purchase Even Though The Check Box Shows It Fits!!!***) || 6 Piece Brake Kit Replacement with Caliper piston compressor tool: Our Replacement brake Kit comes with 2 heavy duty rear rotors along with 4 automotive replacement brake pads that are built to exceed OEM Specification using quality materials for performance and long term use. || Quality That Matters: Our rotors and brake pads kit with brake pad spreader are engineered in Canada for the toughest environments with exact or more vane counts to meet OEM Specifications. They are backed by our satisfaction guarantee for any manufacturing defects so you know we have your back as you make every turns. || Semi GEOMET Protected: Our rear automotive replacement brake kits are made using heavy duty G3000 grade cast iron with a GEOMET coating at the hat and the edge of the rotors to offer just the right balance of performance, quality, durability and affordability. It?€?s resistant to rust and corrosion, built to exceed OEM specifications, and can be installed without any modifications. || No Noise And Low Dust: We use a ceramic formula for our brake pads, they are shimmed, chamfered and slotted to ensure smoother, quieter braking and reduce braking noise. Our automotive replacement brake rotors are double disc smoothened and mill balanced to help prevent cracking and build up. The Brake X rotors and brakes are engineered to elevate your driving experience.
Brake X Get The Right Fit: The rear replacement brakes and rotors kit are built for 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Quest (***Fits Models with 12.13 inch (308mm) Rear Rotor Outside Diameter ONLY!!! Measure the Outside Diameter to Ensure Correct Purchase Even Though The Check Box Shows It Fits!!!***) || 6 Piece Brake Kit Replacement with Caliper piston compressor tool: Our Replacement brake Kit comes with 2 heavy duty rear rotors along with 4 automotive replacement brake pads that are built to exceed OEM Specification using quality materials for performance and long term use. || Quality That Matters: Our rotors and brake pads kit with brake pad spreader are engineered in Canada for the toughest environments with exact or more vane counts to meet OEM Specifications. They are backed by our satisfaction guarantee for any manufacturing defects so you know we have your back as you make every turns. || Semi GEOMET Protected: Our rear automotive replacement brake kits are made using heavy duty G3000 grade cast iron with a GEOMET coating at the hat and the edge of the rotors to offer just the right balance of performance, quality, durability and affordability. It?€?s resistant to rust and corrosion, built to exceed OEM specifications, and can be installed without any modifications. || No Noise And Low Dust: We use a ceramic formula for our brake pads, they are shimmed, chamfered and slotted to ensure smoother, quieter braking and reduce braking noise. Our automotive replacement brake rotors are double disc smoothened and mill balanced to help prevent cracking and build up. The Brake X rotors and brakes are engineered to elevate your driving experience.
Brake X Rear Brake Pads and Rotors Kit with brake caliper compression tool replacement for 2004-2017 Nissan Quest | ARES Semi Coated Rotors and Alpha Ceramic Brake Pads
Brake X Get The Right Fit: The rear replacement brakes and rotors kit are built for 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Quest (***Fits Models with 12.13 inch (308mm) Rear Rotor Outside Diameter ONLY!!! Measure the Outside Diameter to Ensure Correct Purchase Even Though The Check Box Shows It Fits!!!***) || 6 Piece Brake Kit Replacement with Caliper piston compressor tool: Our Replacement brake Kit comes with 2 heavy duty rear rotors along with 4 automotive replacement brake pads that are built to exceed OEM Specification using quality materials for performance and long term use. || Quality That Matters: Our rotors and brake pads kit with brake pad spreader are engineered in Canada for the toughest environments with exact or more vane counts to meet OEM Specifications. They are backed by our satisfaction guarantee for any manufacturing defects so you know we have your back as you make every turns. || Semi GEOMET Protected: Our rear automotive replacement brake kits are made using heavy duty G3000 grade cast iron with a GEOMET coating at the hat and the edge of the rotors to offer just the right balance of performance, quality, durability and affordability. It?€?s resistant to rust and corrosion, built to exceed OEM specifications, and can be installed without any modifications. || No Noise And Low Dust: We use a ceramic formula for our brake pads, they are shimmed, chamfered and slotted to ensure smoother, quieter braking and reduce braking noise. Our automotive replacement brake rotors are double disc smoothened and mill balanced to help prevent cracking and build up. The Brake X rotors and brakes are engineered to elevate your driving experience.
Brake X Get The Right Fit: The rear replacement brakes and rotors kit are built for 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Quest (***Fits Models with 12.13 inch (308mm) Rear Rotor Outside Diameter ONLY!!! Measure the Outside Diameter to Ensure Correct Purchase Even Though The Check Box Shows It Fits!!!***) || 6 Piece Brake Kit Replacement with Caliper piston compressor tool: Our Replacement brake Kit comes with 2 heavy duty rear rotors along with 4 automotive replacement brake pads that are built to exceed OEM Specification using quality materials for performance and long term use. || Quality That Matters: Our rotors and brake pads kit with brake pad spreader are engineered in Canada for the toughest environments with exact or more vane counts to meet OEM Specifications. They are backed by our satisfaction guarantee for any manufacturing defects so you know we have your back as you make every turns. || Semi GEOMET Protected: Our rear automotive replacement brake kits are made using heavy duty G3000 grade cast iron with a GEOMET coating at the hat and the edge of the rotors to offer just the right balance of performance, quality, durability and affordability. It?€?s resistant to rust and corrosion, built to exceed OEM specifications, and can be installed without any modifications. || No Noise And Low Dust: We use a ceramic formula for our brake pads, they are shimmed, chamfered and slotted to ensure smoother, quieter braking and reduce braking noise. Our automotive replacement brake rotors are double disc smoothened and mill balanced to help prevent cracking and build up. The Brake X rotors and brakes are engineered to elevate your driving experience.
Number on catalog scheme:
1
For full view, you need register
Information:
Solenoid Valve for the Retraction of the Auxiliary Control Valve
Illustration 20 g01389212
Within the "CONTROL VALVE" menu, press the down key (6) in order to highlight "A3 VALVE RETRACT".
When the "A3 VALVE RETRACT" option is highlighted, press the OK key (8) .
Illustration 21 g01389213
The monitor will begin to communicate with the ECM. This may take a few moments. When the communication link is established, the monitor will display the calibration screen.
Illustration 22 g01200825
(L) Lower limit (U) Upper limit (C) Current Value (S) "STEP NUMBER" and "STEP NAME"
After the OK key is pressed, the "CALIBRATION TITLE" will appear. The "CALIBRATION TITLE" screen allows the upper limitation and the lower limitation to be set. Refer to Illustration 22.Note: The title of the calibration and the name of the step will change in accordance to the procedure that is being performed. "CALIBRATION TITLE" and "STEP NAME" are used in this document as an example.Note: In the "CALIBRATION TITLE" screen, "STEP No" is displayed in blue. The "OPERATION GUIDANCE" will be displayed in green.
Illustration 23 g01389216
When a pressure gauge is connected to the pressure tap for retract solenoid valve (11) for the auxiliary control valve, press the OK key (8) .Note: The "HYD OIL TEMP / ENGINE SPEED" screens are available during the process of calibration by pressing the up key (1) or the down key (6) .
Illustration 24 g01389217
Release all controls. When all controls are in the neutral position, press the OK key (8) .
Illustration 25 g01389219
Hold the attachment controls in the position of operation. Press the OK key (8) .
Illustration 26 g01389220
Press the right key (2) in order to increase the value. Press the left key (5) in order to decrease the value. Adjust the value until the gauge pressure is within the specification.
Press the device for activation 3 times and release the device for activation 3 times.Note: Pressing the device for activation three times ensures that an accurate reading will result.
Press and hold the device for activation to the OPERATING position. While you hold the device for activation, verify that the setting is correct. If the value of the setting is not correct, repeat Step 8 through Step 10.
When the value is within the specification, press the OK key (8) .
Illustration 27 g01389223
After the OK key is pressed the monitor will automatically continue with the tuning of the next pressure value. Hold the attachment controls in the position of operation. Press the OK key (8) .
Illustration 28 g01389224
Press the right key (2) in order to increase the value. Press the left key (5) in order to decrease the value. Adjust the value until the gauge pressure is within the specification.
Illustration 29 g01389234
Release all controls. When all controls are in the neutral position, press the OK key (8) .
Illustration 30 g01389225
The calibration is complete. Press the cancel key (7) in order to exit the process of calibration.
Illustration 31 g01389227
The "ERROR ID" screen will be displayed on the monitor if an error occurs. The process of calibration will not be saved and the process must be restarted.
Illustration 20 g01389212
Within the "CONTROL VALVE" menu, press the down key (6) in order to highlight "A3 VALVE RETRACT".
When the "A3 VALVE RETRACT" option is highlighted, press the OK key (8) .
Illustration 21 g01389213
The monitor will begin to communicate with the ECM. This may take a few moments. When the communication link is established, the monitor will display the calibration screen.
Illustration 22 g01200825
(L) Lower limit (U) Upper limit (C) Current Value (S) "STEP NUMBER" and "STEP NAME"
After the OK key is pressed, the "CALIBRATION TITLE" will appear. The "CALIBRATION TITLE" screen allows the upper limitation and the lower limitation to be set. Refer to Illustration 22.Note: The title of the calibration and the name of the step will change in accordance to the procedure that is being performed. "CALIBRATION TITLE" and "STEP NAME" are used in this document as an example.Note: In the "CALIBRATION TITLE" screen, "STEP No" is displayed in blue. The "OPERATION GUIDANCE" will be displayed in green.
Illustration 23 g01389216
When a pressure gauge is connected to the pressure tap for retract solenoid valve (11) for the auxiliary control valve, press the OK key (8) .Note: The "HYD OIL TEMP / ENGINE SPEED" screens are available during the process of calibration by pressing the up key (1) or the down key (6) .
Illustration 24 g01389217
Release all controls. When all controls are in the neutral position, press the OK key (8) .
Illustration 25 g01389219
Hold the attachment controls in the position of operation. Press the OK key (8) .
Illustration 26 g01389220
Press the right key (2) in order to increase the value. Press the left key (5) in order to decrease the value. Adjust the value until the gauge pressure is within the specification.
Press the device for activation 3 times and release the device for activation 3 times.Note: Pressing the device for activation three times ensures that an accurate reading will result.
Press and hold the device for activation to the OPERATING position. While you hold the device for activation, verify that the setting is correct. If the value of the setting is not correct, repeat Step 8 through Step 10.
When the value is within the specification, press the OK key (8) .
Illustration 27 g01389223
After the OK key is pressed the monitor will automatically continue with the tuning of the next pressure value. Hold the attachment controls in the position of operation. Press the OK key (8) .
Illustration 28 g01389224
Press the right key (2) in order to increase the value. Press the left key (5) in order to decrease the value. Adjust the value until the gauge pressure is within the specification.
Illustration 29 g01389234
Release all controls. When all controls are in the neutral position, press the OK key (8) .
Illustration 30 g01389225
The calibration is complete. Press the cancel key (7) in order to exit the process of calibration.
Illustration 31 g01389227
The "ERROR ID" screen will be displayed on the monitor if an error occurs. The process of calibration will not be saved and the process must be restarted.
Caterpillar SIS machinery equipment:
Caterpillar SIS
3512C Generator Set PPL00001-UP »
528-8388
TURBOCHARGER GP
3512B Marine Auxiliary Engine Military AAG00001-UP »
528-8388
TURBOCHARGER GP
3512C Marine Auxiliary Engine E3Y00001-UP »
528-8388
TURBOCHARGER GP
3512C Generator Set LL900001-UP »
528-8388
TURBOCHARGER GP
3512C Petroleum Generator Set LM900001-UP »
528-8388
TURBOCHARGER GP
Caterpillar parts catalog:
Parts turbocharger Caterpillar catalog:
5288365
TURBOCHARGER GP
Caterpillar
Caterpillar
5288342
TURBOCHARGER GP
Caterpillar
Caterpillar
5288341
TURBOCHARGER GP
Caterpillar
Caterpillar
5266143
TURBOCHARGER GP
Caterpillar
Caterpillar
5218166
TURBOCHARGER GP
Caterpillar
Caterpillar
5213531
TURBOCHARGER AS
Caterpillar
Caterpillar
5P8840
TURBOCHARGER
Caterpillar
Caterpillar
5393547
TURBOCHARGER GP
Caterpillar
Caterpillar
5378121
TURBOCHARGER GP
Caterpillar
Caterpillar
5378098
TURBOCHARGER GP
Caterpillar
Caterpillar
5378054
TURBOCHARGER GP
Caterpillar
Caterpillar
5378046
TURBOCHARGER GP
Caterpillar
Caterpillar