TURBOCHARGER 6N2506 - Caterpillar

6N2506 TURBOCHARGER Caterpillar parts 3408

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA6N2506
6N-2506
6N2506

Weight: 49 pounds 22 kg.

Buy TURBOCHARGER 6N2506 Caterpillar genuine, new aftermarket tractor parts with delivery
INDUSTRIAL ENGINE,

Compatible equipment models: 6N2506:

INDUSTRIAL ENGINE 3408 Caterpillar

Number on catalog scheme:

Caterpillar 6N2506 Parts scheme TURBOCHARGER

For full view, you need register

Information:

Separation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 3
B 138-7575 Link Bracket 3 Start By:
Remove the transmission and output transfer gears. Refer to Disassembly and Assembly, "Transmission and Output Transfer Gears - Remove".Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform disassembly procedures on a clean work surface. Keep components covered and protected at all times.
Illustration 1 g01199124
Remove bolt (1) and retainer (2) .
Remove O-ring seal (4) (not shown) and yoke (3) .
Illustration 2 g01265228
Install Tooling (A) and a suitable lifting device to cover (5). The weight of cover (5) is approximately 43 kg (95 lb).
Remove 17 bolts (6) from cover (5) .
Remove cover (5) .
Illustration 3 g01265229
Remove lip seal (7) and two O-ring seals (9) from cover (5) .
Remove sleeve (8). Remove the two O-ring seals from sleeve (8) .
Illustration 4 g01265230
Remove spacer (10) .
Install Tooling (B) and a suitable lifting device to transmission assembly (11). The weight of transmission assembly (11) is approximately 544 kg (1200 lb).
Remove 13 bolts (12) .
Use two 3/8" - 16 NC forcing screws to separate transmission assembly (11) from output transfer gears (13) .
Remove transmission assembly (13) .