7C7587 TURBOCHARGER GP Caterpillar parts
3306
Rating:
Alternative (cross code) number:
CA7C7587
7C-7587
7C7587
CA7C7587
7C-7587
7C7587
Weight: 52 pounds 23 kg.
TRUCK ENGINE,
Related part:
7C7587
TURBO GP-BASIC
0R5721
R
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
S4DS Turbocharger 7C-7580 0R-5949 7C-7578 7C7578 7C-7579 7C-7587 Compatible with Caterpillar for CAT Engine 3306 3306B Excavator 330 330L 330LN
Teaviatorial ????Part Name:Turbo charger || ????Part Number: 7C-7580 0R-5949 7C-7578 7C7578 7C-7579 7C-7587 || ????Application: Compatible with Caterpillar for CAT Engine 3306 3306B Excavator 330 330L 330LN || ????Tip: If you need any other parts, please contact us - we are a professional sales team and have many products to offer to you. Many buyers are very satisfied with our service. You can get first-class products and high-quality services from us, believe me, you will have a pleasant shopping experience here. || ????Attention: If you are unsure if the product is suitable for your machine model. In order not to delay your use of the parts, please provide your engine nameplate or serial number and part number, and we will help you confirm if it is suitable. To avoid unnecessary returns, please carefully check the product image and part number to ensure that it is the product you want. Thank you for your support and understanding!
Teaviatorial ????Part Name:Turbo charger || ????Part Number: 7C-7580 0R-5949 7C-7578 7C7578 7C-7579 7C-7587 || ????Application: Compatible with Caterpillar for CAT Engine 3306 3306B Excavator 330 330L 330LN || ????Tip: If you need any other parts, please contact us - we are a professional sales team and have many products to offer to you. Many buyers are very satisfied with our service. You can get first-class products and high-quality services from us, believe me, you will have a pleasant shopping experience here. || ????Attention: If you are unsure if the product is suitable for your machine model. In order not to delay your use of the parts, please provide your engine nameplate or serial number and part number, and we will help you confirm if it is suitable. To avoid unnecessary returns, please carefully check the product image and part number to ensure that it is the product you want. Thank you for your support and understanding!
Turbocharger 7C-7578 7C7578 7C-7587 Fits for Caterpillar Engine 3306 3306B Excavator 330 330L 330LN
Goruvhe ★Part Name★:Turbocharger || ★Part Number★:7C-7578 7C7578 7C-7587 || ★Application★:Fits for Caterpillar Engine 3306 3306B Excavator 330 330L 330LN || NOTE： To avoid unavoidable returns! Before purchasing, please compare with the old parts and part numbers to verify their accuracy before making a purchase. || Tips: The product images are for reference only. If you find any discrepancies with your actual product, please contact us promptly and we will respond as soon as possible!
Goruvhe ★Part Name★:Turbocharger || ★Part Number★:7C-7578 7C7578 7C-7587 || ★Application★:Fits for Caterpillar Engine 3306 3306B Excavator 330 330L 330LN || NOTE： To avoid unavoidable returns! Before purchasing, please compare with the old parts and part numbers to verify their accuracy before making a purchase. || Tips: The product images are for reference only. If you find any discrepancies with your actual product, please contact us promptly and we will respond as soon as possible!
Turbocharger 7C-7578 7C7578 7C-7587 Fits for Caterpillar Engine 3306 3306B Excavator 330 330L 330LN
CNCJNXW ★Part Name★:Turbocharger || ★Part Number★:7C-7578 7C7578 7C-7587 || ★Application★:Fits for Caterpillar Engine 3306 3306B Excavator 330 330L 330LN || NOTE Please check the part number before purchase, do not only look at the appearance of the purchase, check the part number is the best way to reduce the error rate. If you are not clear, please contact us, we are very happy to serve you! || Worth Choice Our product quality is reliable, after-sales guarantee! If you have any questions, please contact us in time, communication is the best way to solve the problem!
CNCJNXW ★Part Name★:Turbocharger || ★Part Number★:7C-7578 7C7578 7C-7587 || ★Application★:Fits for Caterpillar Engine 3306 3306B Excavator 330 330L 330LN || NOTE Please check the part number before purchase, do not only look at the appearance of the purchase, check the part number is the best way to reduce the error rate. If you are not clear, please contact us, we are very happy to serve you! || Worth Choice Our product quality is reliable, after-sales guarantee! If you have any questions, please contact us in time, communication is the best way to solve the problem!
Number on catalog scheme:
1
For full view, you need register
Compatible equipment models: 7C7587:
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
D 1P-1861 Retaining Ring Pliers 1
E FT-2608 Bearing Installation Tool 1
F FT-2609 Valve Block Positioner 1
G FT-2607 Bearing Installation Tool 2
H FT-2606 Yoke Fixture 1
J FT-2611 Bearing Support 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Illustration 1 g01094458
Install plugs (21) and plug (22) in valve block (3). Tighten plugs (21) to a torque of 10.0 0.2 N m (88.51 1.77 lb in). Tighten plug (22) to a torque of 12.25 0.15 N m (108 1 lb in).
Use Tooling (E), Tooling (F), and a suitable press in order to install the bearing in valve block (3).
Illustration 2 g01094449
Install bearing (16). Use Tooling (D) to install retaining ring (17).
Illustration 3 g01094447
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spring seat (11) and the spring.
Illustration 4 g01094444
Install yoke (15) inside the housing of the pump group.
Illustration 5 g01096191
Install plug (13). Tighten the plug to a torque of 7.45 0.65 N m (65.938 5.753 lb in).
Use Tooling (G), Tooling (H), and a suitable press in order to install pintle bearing (14). The bearing that is located on the same side of the housing as spring seat (11) should be installed first.
Ensure that the outer race of pintle bearing (14) is started in the housing on the side opposite of the spring.
Lightly lubricate the yoke with clean engine oil. Ensure that the yoke is in the correct position. The bearings will hold the yoke in place when the bearings are installed.
Use Tooling (G) and a suitable press in order to install the second bearing in the housing.
Ensure that the yoke moves freely before you proceed with the assembly procedure.
Install O-ring seal (12).
Illustration 6 g01094431
Install covers (10).
Install bolts (9). Tighten bolts (9) to a torque of 20 1 N m (15 1 lb ft).
Illustration 7 g01196942
Use the coupling from the fuel transfer pump and Tooling (J) in order to install shaft (8) back into the proper position.
Illustration 8 g01094422
Install rotating group (7) by using the following procedure.
Position the housing so that the internal end of the shaft is angled downward.
Slide rotating group (7) over the shaft and into the housing. Ensure that the shoes of rotating group (7) are against the yoke.
Illustration 9 g01094836
Once the rotating group is installed, turn the rotating group in order to ensure that pins (23) are still in the special notches. If the rotating group jams, pins (23) need to be reinserted into the proper position. The pins in the rotating group are held in position with a “C” clip. See Illustration 9.
Illustration 10 g01094416
Lightly lubricate the face of valve block (3) with clean engine oil. Position control piston
Table 1
Required Tools
Tool Part Number Part Description Qty
D 1P-1861 Retaining Ring Pliers 1
E FT-2608 Bearing Installation Tool 1
F FT-2609 Valve Block Positioner 1
G FT-2607 Bearing Installation Tool 2
H FT-2606 Yoke Fixture 1
J FT-2611 Bearing Support 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not allow dirt to enter the fuel system. Thoroughly clean the area around a fuel system component that will be disconnected. Fit a suitable cover over disconnected fuel system component.
Illustration 1 g01094458
Install plugs (21) and plug (22) in valve block (3). Tighten plugs (21) to a torque of 10.0 0.2 N m (88.51 1.77 lb in). Tighten plug (22) to a torque of 12.25 0.15 N m (108 1 lb in).
Use Tooling (E), Tooling (F), and a suitable press in order to install the bearing in valve block (3).
Illustration 2 g01094449
Install bearing (16). Use Tooling (D) to install retaining ring (17).
Illustration 3 g01094447
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spring seat (11) and the spring.
Illustration 4 g01094444
Install yoke (15) inside the housing of the pump group.
Illustration 5 g01096191
Install plug (13). Tighten the plug to a torque of 7.45 0.65 N m (65.938 5.753 lb in).
Use Tooling (G), Tooling (H), and a suitable press in order to install pintle bearing (14). The bearing that is located on the same side of the housing as spring seat (11) should be installed first.
Ensure that the outer race of pintle bearing (14) is started in the housing on the side opposite of the spring.
Lightly lubricate the yoke with clean engine oil. Ensure that the yoke is in the correct position. The bearings will hold the yoke in place when the bearings are installed.
Use Tooling (G) and a suitable press in order to install the second bearing in the housing.
Ensure that the yoke moves freely before you proceed with the assembly procedure.
Install O-ring seal (12).
Illustration 6 g01094431
Install covers (10).
Install bolts (9). Tighten bolts (9) to a torque of 20 1 N m (15 1 lb ft).
Illustration 7 g01196942
Use the coupling from the fuel transfer pump and Tooling (J) in order to install shaft (8) back into the proper position.
Illustration 8 g01094422
Install rotating group (7) by using the following procedure.
Position the housing so that the internal end of the shaft is angled downward.
Slide rotating group (7) over the shaft and into the housing. Ensure that the shoes of rotating group (7) are against the yoke.
Illustration 9 g01094836
Once the rotating group is installed, turn the rotating group in order to ensure that pins (23) are still in the special notches. If the rotating group jams, pins (23) need to be reinserted into the proper position. The pins in the rotating group are held in position with a “C” clip. See Illustration 9.
Illustration 10 g01094416
Lightly lubricate the face of valve block (3) with clean engine oil. Position control piston
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts turbocharger Caterpillar catalog:
1673C, 1674, 235, 3306, D7F, D7G
3306, 571G, 572G, D7G
1673C, 1674, 3306, D7G
1673C, 3306
1673C, 3306, 627, 627B, 637, D6C
1673C, 3306, 627B, D6C
140B, 140G, 14G, 235, 3306, 528, 814, 815, 816, 966C, 966R, 977K, 977L, D5, D5B, D6C, D6D
3306, 627, 627B, 637, D6C
1673C, 3306
3306, 65C, 70C
3306, 3306C