TURBOCHARGER GP 7C9995 - Caterpillar

other items can change at any time. These changes can affect the service that is given to the product. Obtain the complete and most current information before you start any job.When replacement parts are required for this product, Caterpillar recommends using Cat replacement parts or parts with equivalent specifications including, but not limited to physical dimensions, type, strength, and material.Literature Information
This manual contains safety information, operation instructions and maintenance information and should be stored with the tool group.Some photographs or illustrations in this publication may show details that can be different from your service tool. Guards and covers might have been removed for illustrative purposes.Continuing improvement and advancement of product design might have caused changes to your service tool, which are not included in this publication.Whenever a question arises regarding your service tool or this publication, consult Dealer Service Tools (DST) for the latest available information.Safety Section
The Safety Section lists basic safety precautions.Read and understand the basic precautions listed in the Safety Section before operating or performing maintenance and repair on this service tool.General Information Section
The General Information Section describes tooling functions and features. This section provides useful information on individual parts, additional tooling, and resources.Operation Section
The Operation Section is a reference for the new operator and a refresher for the experienced operator.Photographs and illustrations guide the operator through correct procedures for using the tool group.Operating techniques outlined in this publication are basic. Skill and techniques develop as the operator gains knowledge of the service tool and tool capabilities.Maintenance Section
The Maintenance Section is a guide to tool inspection, cleaning, storage, and tool disposal.Safety Section
Safety Icon Nomenclature
Personal Protection/Important Information
Illustration 2 g02166423
Personal Protection/Important InformationHazard Avoidance
Crushing Hazard (foot)
Crushing Hazard (hand)
Pinch Point
Working Load Limit (WLL) mark - Do not use lifting device unless load identification (WLL) markings are legible.
Safety Alert - Do not use C-Frame lifting device for anything other than the intended purpose. General Information Section
Introduction
The 185-5321 Cylinder Head Lifting Hook Assembly is used to quickly and safely lift the cylinder head core. The 185-5321 Cylinder Head Lifting Hook Assembly is designed for bare cylinder head "core" handling and not as an engine assembly tool.Operation Section
Illustration 3 g03194156
The 185-5321 Cylinder Head Lifting Hook Assembly attaches to the core without bolts by inserting the straight leg into the middle bolt hole of the cylinder head. The hooked leg fits into the breather openings on 3114, 3116, 3126 MUI/HEUI Engines, or into the exhaust port on 3300, 3406, 3408, and 3412 Engines.The 185-5321 Cylinder Head Lifting Hook Assembly has a Working Load Limit (WLL) of 340 kg (750 lb).Maintenance Section
Inspection
Inspect tooling prior to each use for dents, cracks, bent, or worn parts. If damage is found, destroy the tool and dispose of as scrap. Replace with new product.
Do not use unless the Working Load Limit (WLL) identification markings are legible.
Do not use if lifting bracket is bent, cracked, or damaged. Do not use if lifting holes are elongated.
Illustration 4 g03026177
Do not use if hardware is damaged or missing.
Have the tooling inspected