TURBOCHARGER GP 7E0474 - Caterpillar

7E0474 TURBOCHARGER GP Caterpillar parts 3412, 3412C

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA7E0474
7E-0474
7E0474

Weight: 54 pounds 24 kg.

Buy TURBOCHARGER GP 7E0474 Caterpillar genuine, new aftermarket tractor parts with delivery
GEN SET ENGINE, GENERATOR SET,

Compatible equipment models: 7E0474:

GEN SET ENGINE 3412

GENERATOR SET 3412C Caterpillar

Number on catalog scheme: 1

Caterpillar 7E0474 Parts scheme TURBOCHARGER GP

For full view, you need register

Information:

Illustration 1 g02563879
Schematic of the ejector forward control circuitThis diagnostic code is recorded when the ECM determines that the solenoid is out of calibration.The possible causes of this diagnostic code are listed:
The machine serial number that is programmed in to the Caterpillar Monitoring System has changed since the last calibration.
The Implement control ECM has been replaced.
The ECM has failed. The failure of ECM is unlikely.Test Step 1. RECALIBRATE THE SOLENOIDRecalibrate the solenoid. See Testing and Adjusting, "Implement Control Lever - Calibrate".Expected Result:A successful calibration causes this diagnostic code to become inactive.Results:
YES - The calibration causes this diagnostic code to become inactive. Resume normal machine operation.STOP
NO - The calibration has not caused the diagnostic code to become inactive.Repair: Go to Troubleshooting, "Joystick Calibration Is Not Successful" in order to continue troubleshooting.STOP