TURBOCHARGER GP 7E0550 - Caterpillar

7E0550 TURBOCHARGER GP Caterpillar parts 3412, 3412C

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA7E0550
7E-0550
7E0550

Weight: 0.80 pounds 0 kg.

Buy TURBOCHARGER GP 7E0550 Caterpillar genuine, new aftermarket tractor parts with delivery
GEN SET ENGINE, GENERATOR SET,

Compatible equipment models: 7E0550:

GEN SET ENGINE 3412

GENERATOR SET 3412C Caterpillar

Number on catalog scheme:

Caterpillar 7E0550 Parts scheme TURBOCHARGER GP

For full view, you need register

Information:

Illustration 1.
Rear Frame Assembly(1) Bearing.(2) 117-9369 Bracket. Procedure To Install New 158-5633 Pin Assembly And Additional Hardware Into The 117-9369 Bracket Assembly
1. Remove the existing pin assembly from the steering cylinder. See the Reference for disassembly and assembly procedures.2. Before assembling the parts to the pin, place the proper amount of 4C-4030 Thread Lock to 8T-4908 Bolt (4). Install the new 158-5633 Pin Assembly.3. 139-1994 Spacer (6) is 3 mm (.12 in) thick. Measure the length of the pin that is extending beyond the bottom of the bracket. Utilize the proper number of washers to maintain a maximum gap between 139-1994 Spacer (6) and the bottom of 117-9369 Bracket Assembly (2) of 3 mm (.12 in) or less.4. Temporarily place 9R-8760 Plate (3) on the bottom of 158-5633 Pin Assembly. Measure the distance between the plate and the bottom of 117-9369 Bracket Assembly (2). See the chart below to determine the number of 139-1994 Spacers (6) needed.
Illustration 2.
158-5633 Pin Assembly. (3) 9R-8760 Plate. (4) 8T-4908 Bolt.(5) 8T-4224 Washer.(6) 139-1994 Spacer. 5. Install the appropriate number of 139-1994 Spacers.6. Tighten 8T-4908 Bolt (4) to a torque of 28 7 N m (20 5 lb ft).