TURBOCHARGER ASSEMBLY 8M6835 - Caterpillar

8M6835 TURBOCHARGER ASSEMBLY Caterpillar parts D342

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA8M6835
8M-6835
8M6835

Caterpillar 8M6835 TURBOCHARGER ASSEMBLY

Weight: 32 pounds 14 kg.

Buy TURBOCHARGER ASSEMBLY 8M6835 Caterpillar genuine, new aftermarket tractor parts with delivery
INDUSTRIAL ENGINE,

Compatible equipment models: 8M6835:

INDUSTRIAL ENGINE D342 Caterpillar

Number on catalog scheme:

Caterpillar 8M6835 Parts scheme TURBOCHARGER ASSEMBLY

For full view, you need register

Information:

CHECKING FACE RUNOUT OF THE FLYWHEEL1. Install the dial indicator as shown. Put a force on the flywheel toward the rear.2. Set the dial indicator to read 0.0 mm (.000 in.)3. Turn the flywheel and read the indicator every 90°. Put a force on the flywheel to the rear before each reading.4. The difference between the lower and higher measurements taken at all four points must not be more than 0.15 mm (.006 in.) which is the maximum permissible face runout (axial eccentricity of the flywheel).Bore Runout (radial eccentricity) of the Flywheel:
CHECKING FLYWHEEL BORE1. Install the dial indicator (3) and make an adjustment of the universal attachment (4) so it makes contact as shown.2. Set the dial indicator to read 0.0 mm (.00 in.)3. Turn the flywheel and read the indicator every 90°.4. The difference between the lower and higher measurements taken at all four points must not be more than 0.15 mm (.006 in.), which is the maximum permissible bore runout (radial eccentricity) of the flywheel.
CHECKING FLYWHEEL CLUTCH PILOT BEARING BORE5. Runout (eccentricity) of the bore for the pilot bearing for the flywheel clutch, must not exceed 0.13 mm (.005 in.).