TURBOCHARGER GROUP 8N9656 - Caterpillar

Trip Segments
The Caterpillar electronic engines will record vehicle operating information in a variety of ways. The Caterpillar Driver Information Display (Cat ID) provides the method to label recorded information for both driver and fleet owner. With the 3176B, C-10, C-12, 3406E, C-15, and C-16 Engines, the Cat ID records information in three separate ways--Lifetime Totals, Fleet Trip Segment, and Driver Trip Segment. With the 3100 HEUI Engines, the Cat ID displays Fleet Trip Segment and Lifetime Totals.Lifetime Totals
Lifetime totals are permanently stored in the ECM on the electronic engines from the time the engine is new. The Lifetime Totals cannot be reset or cleared under normal operation. Lifetime Totals are shown on the Cat ID screen map.Totals Information Column (3176B, C-10, C-12, 3406E, C-15, and C-16 Engines Only)
The Totals Information column acts as a gateway to the Driver Trip, Fleet Trip, and Lifetime Totals columns. Once the down arrow key is pressed, from the Totals Information title screen, the operator will have access to the three totals columns.
Totals Information Column.Fleet Trip Segment
This information is intended for the fleet owner, or owner-operator. The ability to reset the information from the Cat ID depends on how the engine is programmed. Additionally, the Fleet Trip Segment can be reset using electronic service tools and the appropriate passwords. Resetting the Fleet Trip Segment does not affect the Driver Trip Segment (if supported) or the Lifetime Totals. The Fleet Trip Segment is shown on the Cat ID screen map.(3176B, C-10, C-12, 3406E, C-15, and C-16 Engines Only)
The Cat ID provides the driver with the capability to enter the state in which the vehicle is driving. The state information is then part of the Fleet Trip Segment. The Cat ID also provides the capability to enter two Driver ID's for the Fleet Trip Segment. The Fleet Trip Segment can then be sorted for the two Driver ID's by the Caterpillar Fleet Information Software. The state information is shown on the Cat ID screen map. Entering the State Crossings and Driver ID is explained further in this manual. When the Fleet Trip Segment is reset, the Fleet Trip Driver ID's, and Fleet Trip State Totals are cleared.Driver Trip Segment (3176B, C-10, C-12, 3406E, C-15, and C-16 Engines Only)
The Driver Trip Segment is intended for, and controlled by the driver. The Driver Trip Totals are shown on the Cat ID screen map in column 2. Resetting the Driver Trip Segment does not affect the Fleet Trip Segment (and therefore State Totals or Driver ID's) or Lifetime Totals.Example of Trip Segments and Lifetime Totals (3176B, C-10, C-12, 3406E, C-15, and C-16 Engines Only)
The Explanation of Trip Segments shows the affect of using the State Crossing, Driver ID, Fleet Trip Segment, and Driver Trip Segment.
Typical Example of Trip Segment (3176B, C-10, C-12, 3406E, C-15, or C-16 Engine) or Fleet Trip Segment (3116 or 3126).Screens (Driver Trip Totals) (3176B, C-10, C-12, 3406E, C-15, and C-16 Engines Only)
The Driver Trip Segment (start and stop point) is controlled by the driver,