9Y4929 TURBOCHARGER GP Caterpillar parts
3116
Rating:
Alternative (cross code) number:
CA9Y4929
9Y-4929
9Y4929
CA9Y4929
9Y-4929
9Y4929
Weight: 18 pounds 8 kg.
GEN SET ENGINE,
Related part:
9Y4929
TURBO GP-BSC
0R6086
R
Compatible equipment models: 9Y4929:
Number on catalog scheme:
1
For full view, you need register
Information:
Removal Procedure
Note: For a complete description of Type 1 and Type 2 engines, refer to Disassembly and Assembly, "Engine Design".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00545513
Typical example
Illustration 2 g00545514
Typical example
Disconnect electrical connector (5) for the air inlet heater.
Disconnect fuel line (6) to the air inlet heater.
Remove two bolts (7) that hold the bracket for fuel line (6) in position.
Loosen two hose clamps (8) and slide hose (9) toward the turbocharger.
Remove four bolts (3) in order to remove elbow (2) and gasket (4) .
Disconnect boost pressure hose (10) .
Remove bolts (12) that hold the turbocharger support to air inlet manifold (14) .
Remove bolts (13) that hold air inlet manifold (14) to the cylinder head.
Remove air inlet manifold (14) and gaskets (11) .
Remove seal (1) .
Note: For a complete description of Type 1 and Type 2 engines, refer to Disassembly and Assembly, "Engine Design".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00545513
Typical example
Illustration 2 g00545514
Typical example
Disconnect electrical connector (5) for the air inlet heater.
Disconnect fuel line (6) to the air inlet heater.
Remove two bolts (7) that hold the bracket for fuel line (6) in position.
Loosen two hose clamps (8) and slide hose (9) toward the turbocharger.
Remove four bolts (3) in order to remove elbow (2) and gasket (4) .
Disconnect boost pressure hose (10) .
Remove bolts (12) that hold the turbocharger support to air inlet manifold (14) .
Remove bolts (13) that hold air inlet manifold (14) to the cylinder head.
Remove air inlet manifold (14) and gaskets (11) .
Remove seal (1) .
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts turbocharger Caterpillar catalog:
9Y6738
TURBOCHARGER GP
3114, D7H
3114, D7H