TURBOCHARGER GP 9Y5598 - Caterpillar

Illustration 1 g02820679
(1) Bypass unavailable
(2) UPS notice
(3) On-bypass
(4) Discharging
(5) UPS overload
(6) Low DC voltage
(7) UPS alarm
(8) Off-line
(9) Lamp test switch
(10) Alarm silence The remote status panel allows the user to monitor various functions through use of eight status lights.Specifications
Table 1
Remote Status Panel
Specifications
Description Value
Input Voltage
Input voltage to panel 15 to 45 VDC
Power
Power requirements 6 W maximum
Physical Dimensions
Height 270 mm (10.62 inch)
Depth 86 mm (3.37 inch)
Width 86 mm (3.37 inch)
Weight 1.14 kg (2.5 lb)
Distance from UPS less than 305 m (1000 ft)
Environmental Specifications
Horn (Output) 80 dB(A)
nominal
Temperature range −40 °C (−40 °F) to 70 °C (158 °F)
Humidity 0 to 100% relative humidity
Emissions and Immunity IEC 801-2
IEC 801-3
IEC 801-4
EN 5082-2
89/392/EEC Certification (EEC) Connecting to the Remote Status Panel
The system is designed for flush mounting or surface mounting in a panel box. The system uses 18 AWG or larger wire. The wire will consist of three conductors. The wire consists of a data conductor, a ground conductor, and a power conductor. There are 14 screw connections on the back of the status panel that are Labeled. Refer to Table 2.
Table 2
Connections (Remote Status Panel) Connections (System Input/Output Daughter board) (J5)
Terminal 1 "+24 VDC" Connection 1
Terminal 2 "Serial data in" Connection 5
Terminal 3 "Spare"
Terminal 4 "Spare"
Terminal 5 "Spare"
Terminal 6 "Jumper to 7"
Terminal 7 "Ground" Connection 3
Terminal 8 "Spare"
Terminal 9 "Jumper to 6"
Terminal 10 "Spare"
Terminal 11 "Spare"
Terminal 12 "Lamp test (1)"
Terminal 13 "Horn silence (1)"
Terminal 14 "Horn output (1)"
Illustration 2 g02833162
Remote status panel J5 connector orientation
(15) Pin 5
(16) Pin 4
(17) Pin 3
(18) Pin 2
(19) Pin 1