U-BOLT 8T3389 - Caterpillar

Installation Instructions
Illustration 1 g03336982
(5) Grill As
Remove Grill As (5) .
Illustration 2 g03336983
(6) Bolt (7) Prop Rod
Remove Bolt (6) and Prop Rod (7) .
Illustration 3 g03336984
(8) Clip (9) Bolt
Remove Clip (8) and Bolt (9) .
Illustration 4 g03336985
(10) Boss
Cut the Boss (10). Retain this part.
Illustration 5 g03336986
(A) 49.3 mm (1.9 inch) (B) 402 mm (15.8 inch)
Mark up the new location for Boss (10). Refer to Illustration 5.
Illustration 6 g03336987
(10) Boss
Tack weld the Boss (10) .
Illustration 7 g03336988
(3) Stud Ball (10) Boss
Install Stud Ball (3) into Boss (10) on the frame. Torque Stud Ball (3) to 28 7 N m (20.7 5.2 lb ft).
Illustration 8 g03336989
(3) Stud Ball (5) Grill As
Install Stud Ball (3) into the plate in Grill As (5). Refer to Table 2 for the correct Grill As.
Table 2
Grill As (5)    
Part Number    Machine    
415-2793     272D XHP (S/N: SHY)
299D XHP (S/N: NLC)    
415-2794     272D (S/N: GSL)
299D (S/N: HCL)    
Illustration 9 g03336990
(5) Grill As
Install new Grill (5). Refer to Table 2 for the correct Grill As.
Illustration 10 g03336991
(4) Gas Strut
Orient the ball stud ends of Gas Strut (4) to be facing opposite each other.
Illustration 11 g03336992
(4) Gas Strut (5) Grill As
Install Gas Strut (4). Attach the pin end on the stud ball to the Frame. Attach the rod end on the stud ball to the Grill (5) .
Illustration 12 g03336993
(5) Grill As
Close the Grill (5). Make sure that the Grill opens and closes without interference.