AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2M5488 TURBOCHARGER ASSEMBLY Serial No. 36A2251 to 36A3052, 36A3055 to 36A3062 inclusive D8H TRACK-TYPE TRACTOR


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
POWER TRAIN
COOLER GP
ELECTRICAL AND STARTING SYSTEM
STARTING AR
BASIC ENGINE
CYLINDER HEAD GP

TRACK-TYPE TRACTOR D8H TRACK-TYPE TRACTOR 36A
 D8 TRACTOR / DIRECT DRIVE / 36A00001-03859 (MACHINE) UE033298 D8H 36A   (1958)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER ASSEMBLY
2M-5488 TURBOCHARGER ASSEMBLY
TURBOCHARGER ASSEMBLY
2M-5488 TURBOCHARGER ASSEMBLY
TURBOCHARGER ASSEMBLY
2M-5488 TURBOCHARGER ASSEMBLY
TURBOCHARGER ASSEMBLY
2M-5488 TURBOCHARGER ASSEMBLY
3S-8271 TURBOCHARGER ASSEMBLY
TURBOCHARGER ASSEMBLY
3S-2394 TURBOCHARGER ASSEMBLY
 

#UE0332980040
 

2M-5488: TURBOCHARGER ASSEMBLY

2M5488 TURBOCHARGER ASSEMBLY
Serial No. 36A2251 to 36A3052, 36A3055 to 36A3062 inclusive
c63850 UE033298
2M5488 TURBOCHARGER ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4M-4418 [1] PLATE ASSEM.  
  2M-2575 [1] HOUSING ASSEM.  
  4M-6646 [2] PIN  
    (PART OF ASSEM.2M2575)
  2M-8075 [4] NUT  
  3B-4506 [4] LOCKWASHER  
  9H-2346 [4] STUD  
    (PART OF ASSEM.4M4418)
  0S-1615 [6] BOLT  
  2M-2576 [3] LOCK  
  5M-1786 [2] BEARING  
  2M-2566 [1] WASHER  
  2M-2571 [1] RING  
  2M-2569 [1] WASHER  
  2M-2570 [1] NUT  
    (PARTS OF ASSEM.2M7888)
  2M-7888 [1] ROTATING ASSEM.  
  2M-2562 [1] RING  
  2M-2564 [1] WASHER  
  6H-5888 [1] STRAINER ASSEM.  
  8H-4578 [1] RING (snap)  
  2M-2561 [1] "O" RING  
  2M-2563 [1] PLATE  
  9H-2351 [1] "O" RING  
  2M-8051 [1] SHIM (.020" thick)  
  2M-2556 [1] SHIM. (.005" thick)  
  4M-4411 [1] HOUSING  
  1A-2029 [12] BOLT  
  3B-4506 [12] LOCKWASHER  
  2M-2573 [2] BOLT (PLAIN)  
  2M-5528 [1] BOLT (DRILLED)  
    (FOR WIRE & SEAL)
  5H-8642 [3] NUT  
  5H-8641 [3] GASKET  
  4M-0198 [1] NOZZLE  
  2M-2560 [1] DIAPHRAGM ASSEM.  
  5M-3688 R [1] HOUSING ASSEM.  
  7H-3471 [4] STUD  
  1B-5355 H [4] NUT  
  3B-4506 [4] LOCKWASHER  
  5M-3563 H [1] FLANGE  
  2M-2567 [1] RING (SNAP)  
  2M-2568 [1] NUT  
  6H-4356 H [1] PLATE (WARNING)  
  4B-4158 H [4] SCREW (DRIVE)  
    (NOT SHOWN)
  2M-8049 [1] SHIM  
  2M-8075 [8] NUT  
  2M-8050 [4] PLATE  
  2M-2558 [1] SHIM  
  4M-9968 [8] STUD  
    (PART OF ASSEM. 5M3688)
  6H-4115 [1] PLATE (NAME)  
  2F-0808 [4] SCREW (DRIVE)  
    (NOT SHOWN)
  8H-1858 H [1] GASKET  
  1A-1460 H [4] BOLT  
  1B-5357 H [4] NUT  
  H   NOT PART OF THIS ASSEMBLY
  R   REMFG PART MAY BE AVAILABLE
 

#UE0332980041
 

2M-5488: TURBOCHARGER ASSEMBLY

2M5488 TURBOCHARGER ASSEMBLY
Serial No. 36A3053, 36A3054 and 36A3063-Up
c933352 UE033298
2M5488 TURBOCHARGER ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4M-4418 [1] PLATE ASSEM.  
  2M-2575 [1] HOUSING ASSEM.  
  4M-6646 [2] PIN  
    (PART OF ASSEM. 2M2575)
  2M-8075 [4] NUT  
  3B-4506 [4] LOCKWASHER  
  9H-2346 [4] STUD  
    (PART OF ASSEM. 4M4418)
  0S-1615 [6] BOLT  
  2M-2576 [3] LOCK  
  5M-1786 [2] BEARING  
  2M-2566 [1] WASHER  
  2M-2571 [1] RING  
  2M-2569 [1] WASHER  
  2M-2570 [1] NUT  
    (PARTS OF ASSEM. 2M7888)
  2M-7888 [1] ROTATING ASSEM.  
  2M-2562 [1] RING  
  2M-2564 [1] WASHER  
  6H-5888 [1] STRAINER ASSEM.  
  [1] RING (SNAP)  
  2M-2561 [1] "O" RING  
  2M-2563 [1] PLATE  
  9H-2351 [1] "O" RING  
  2M-8051 [1] SHIM (.020" THICK)  
  2M-2556 [1] SHIM (.005" THICK)  
  4M-4411 [1] HOUSING  
  1A-2029 [12] BOLT  
  3B-4506 [12] LOCKWASHER  
  2M-2573 [2] BOLT (PLAIN)  
  2M-5528 [1] BOLT (DRILLED)  
    (FOR WIRE & SEAL)
  5H-8642 [3] NUT  
  5H-8641 [3] GASKET  
  4M-0198 [1] NOZZLE  
  2M-2560 [1] DIAPHRAGM ASSEM.  
  5M-3688 R [1] HOUSING ASSEM.  
  0S-0699 [2] STUD  
  1B-5355 H [2] NUT  
  5M-4223 H [1] ADAPTER  
  2M-2567 [1] RING (SNAP)  
  2M-2568 [1] NUT  
  6H-4356 H [1] PLATE (WARNING)  
  4B-4158 H [4] SCREW (DRIVE)  
    (NOT SHOWN)
  2M-8049 [1] SHIM  
  2M-8075 [8] NUT  
  2M-8050 [4] PLATE  
  2M-2558 [1] SHIM  
  4M-9968 [8] STUD  
    (PART OF ASSEM. 5M3688)
  6H-4115 [1] PLATE (NAME)  
  2F-0808 [4] SCREW (DRIVE)  
    (NOT SHOWN)
  8H-1858 H [1] GASKET  
  1A-1460 H [4] BOLT  
  1B-5357 H [4] NUT  
  H   NOT PART OF THIS ASSEMBLY
  R   REMFG PART MAY BE AVAILABLE
 

#UE0332980042
 

3S-8271: TURBOCHARGER ASSEMBLY

3S8271 OR 3S2394 TURBOCHARGER ASSEMBLY--Field Installation
Serial No. 36A3053, 36A3054 and 36A3063-Up. Individual parts of 3S8271 and 3S2394 Turbocharger Assemblies are interchangeable
Replacement of Thrust Collar or Thrust Plate Assembly for 3S2394 Turbocharger Assembly
requires both 2M2571 Thrust Collar and 9M8727 Thrust Plate Assembly
c97198 UE033298
  For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3S-8269 H [1] PLATE ASSEM.  
  8M-0004 RH [1] HOUSING ASSEM.  
  4M-6646 [2] PIN  
    (PART OF HOUSING ASSEM. 8M4)
  2M-8075 [4] NUT  
  3B-4506 [4] LOCKWASHER  
  0S-1615 H [6] BOLT  
  2M-2576 H [3] LOCK  
  2M-2561 H [1] SEAL  
  2M-2562 H [1] RING  
  2M-2571 H [1] COLLAR  
  2M-2569 H [1] WASHER  
  2M-2570 H [1] NUT  
  3S-7803 H [3] SHIM  
  3S-7805 H [1] WHEEL  
    (COMPRESSOR)
  2M-2564 H [1] WASHER  
  5M-1786 H [2] BEARING  
  1S-0624 O [2] BEARING  
    (.005" OFF SIZE)
  1S-0625 O [2] BEARING  
    (.010" OFF SIZE)
  9M-8727 RH [1] PLATE ASSEM.  
  4M-4411 [1] HOUSING  
    (COMPRESSOR)
  1A-2029 [12] BOLT  
  3B-4506 [12] LOCKWASHER  
  3S-7804 R [1] CARTRIDGE ASSEM.  
    (CONSIST OF PARTS MARKED H)
  2M-2573 [2] BOLT (PLAIN)  
  2M-5528 [1] BOLT (DRILLED)  
    (FOR WIRE AND SEAL)
  5H-8642 [3] NUT  
  5H-8641 [3] GASKET  
  4M-0198 [1] NOZZLE  
  2M-2560 H [1] DIAPHRAGM ASSEM.  
  5M-3688 R [1] HOUSING ASSEM.  
    (TURBINE)
  3S-8268 H [1] SHAFT AND WHEEL ASSEM.  
  2M-2567 H [1] RING (SNAP)  
  2M-2568 H [1] NUT (LOCK)  
  1S-0627 H [1] PLATE (WARNING)  
  2F-0808 H [4] SCREW (DRIVE)  
    (NOT SHOWN)
  2M-8049 [1] SHIM  
  2M-8075 [8] NUT  
  2M-8050 [4] PLATE (LOCK)  
  2M-2558 [1] SHIM  
  4M-9968 [8] STUD  
    (PART OF HOUSING ASSEM. 5M3688)
  6H-4115 [1] PLATE (NAME)  
  2F-0808 [4] SCREW (DRIVE)  
    (NOT SHOWN)
  O   NOT PART OF TURBOCHARGER ASSEM
  R   REMFG PART MAY BE AVAILABLE
 

#UE0332980043
 

3S-2394: TURBOCHARGER ASSEMBLY

3S8271 OR 3S2394 TURBOCHARGER ASSEMBLY--Field Installation
Serial No. 36A3053, 36A3054 and 36A3063-Up. Individual parts of 3S8271 and 3S2394 Turbocharger Assemblies are interchangeable
Replacement of Thrust Collar or Thrust Plate Assembly for 3S2394 Turbocharger Assembly
requires both 2M2571 Thrust Collar and 9M8727 Thrust Plate Assembly
c97198 UE033298
3S2394 TURBOCHARGER ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3S-8269 H [1] PLATE ASSEM.  
  8M-0004 RH [1] HOUSING ASSEM.  
  4M-6646 [2] PIN  
    (PART OF HOUSING ASSEM. 8M4)
  2M-8075 [4] NUT  
  3B-4506 [4] LOCKWASHER  
  0S-1615 H [6] BOLT  
  2M-2576 H [3] LOCK  
  2M-2561 H [1] SEAL  
  2M-2562 H [1] RING  
  2M-2571 H [1] COLLAR  
  2M-2569 H [1] WASHER  
  2M-2570 H [1] NUT  
  3S-7803 H [3] SHIM  
  3S-7805 H [1] WHEEL  
    (COMPRESSOR)
  2M-2564 H [1] WASHER  
  5M-1786 H [2] BEARING  
  1S-0624 O [2] BEARING  
    (.005" OFF SIZE)
  1S-0625 O [2] BEARING  
    (.010" OFF SIZE)
  9M-8727 RH [1] PLATE ASSEM.  
  4M-4411 [1] HOUSING  
    (COMPRESSOR)
  1A-2029 [12] BOLT  
  3B-4506 [12] LOCKWASHER  
  3S-7804 R [1] CARTRIDGE ASSEM.  
    (CONSIST OF PARTS MARKED H)
  2M-2573 [2] BOLT (PLAIN)  
  2M-5528 [1] BOLT (DRILLED)  
    (FOR WIRE AND SEAL)
  5H-8642 [3] NUT  
  5H-8641 [3] GASKET  
  4M-0198 [1] NOZZLE  
  2M-2560 H [1] DIAPHRAGM ASSEM.  
  5M-3688 R [1] HOUSING ASSEM.  
    (TURBINE)
  3S-8268 H [1] SHAFT AND WHEEL ASSEM.  
  2M-2567 H [1] RING (SNAP)  
  2M-2568 H [1] NUT (LOCK)  
  1S-0627 H [1] PLATE (WARNING)  
  2F-0808 H [4] SCREW (DRIVE)  
    (NOT SHOWN)
  2M-8049 [1] SHIM  
  2M-8075 [8] NUT  
  2M-8050 [4] PLATE (LOCK)  
  2M-2558 [1] SHIM  
  4M-9968 [8] STUD  
    (PART OF HOUSING ASSEM. 5M3688)
  6H-4115 [1] PLATE (NAME)  
  2F-0808 [4] SCREW (DRIVE)  
    (NOT SHOWN)
  O   NOT PART OF TURBOCHARGER ASSEM
  R   REMFG PART MAY BE AVAILABLE
 

#UE0332980044
 

2M-8190: TRANSMISSION OIL COOLER

TRANSMISSION OIL COOLER (2M8190 N/S)
Serial No. 36A2859-Up
c126882 UE033298
2M8190 TRANSMISSION OIL COOLER Parts scheme
  For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1A-2029 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  5H-1096 [1] GASKET  
  1M-7259 [1] GASKET  
  2M-8214 [1] CORE ASSEM.  
  1A-2029 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  3F-1417 [2] WASHER  
  1M-7259 [1] GASKET  
  5M-0981 [1] BONNET  
  4F-9116 [1] PLUG  
  4F-9325 [1] GASKET  
  1A-2029 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  5H-1096 [1] GASKET  
  5H-1065 [1] BONNET  
  1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  5M-0982 [1] BRACKET  
  1A-2029 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  0T-0573 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  3F-1417 [2] WASHER  
 

#UE0332980045
 

TRANSMISSION OIL COOLER

TRANSMISSION OIL COOLER
Serial No. 36A1 to 36A2858 inclusive
c64703 UE033298
None TRANSMISSION OIL COOLER Parts scheme
  For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5M-2787 [1] GASKET  
  1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  2M-8214 [1] CORE ASSEM.  
  5H-1098 [1] BAND  
  1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  4F-9116 [1] PLUG  
  4F-9325 [1] GASKET  
  1A-2029 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  5M-2787 [1] GASKET  
  5H-1065 [1] BONNET  
  8H-7357 [1] BAR  
  1A-2029 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  5H-1099 [1] BONNET  
  9H-1536 [2] GASKET  
 

#UE0332980046
 

9H-4420: COMPRESSION RELEASE CONTROL GROUP

9H4420 COMPRESSION RELEASE CONTROL GROUP
c54088 UE033298
9H4420 COMPRESSION RELEASE CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1591 [1] BOLT  
  1D-4717 [1] NUT  
  3B-4506 [1] LOCKWASHER  
  9H-0638 [1] LEVER  
  1A-2029 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  4B-4278 [2] WASHER  
  5H-4195 [1] BRACKET  
  8F-4832 [1] PLATE (START)  
  8F-4327 [1] PLATE (RUN)  
  4B-4159 [4] SCREW  
  1A-2029 [1] BOLT  
  5H-4194 [1] COUPLING ASSEM.  
  1B-8702 [2] KEY  
  6F-4210 [1] PLUNGER  
  1A-2029 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  4H-8967 [1] BRACKET  
  0S-1012 [1] SPRING  
 

#UE0332980047
 

CYLINDER HEAD AND VALVE MECHANISM

CYLINDER HEAD AND VALVE MECHANISM--Side View--Part 1 of 2
Serial No. 36A1 to 36A1158 inclusive
Note: 2M143 Valve Grinding Gasket Group is available
c67185 UE033298
None CYLINDER HEAD AND VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6F-4929 [2] COVER  
  1A-5666 [16] NUT  
  9H-1031 [16] WASHER  
  8H-8670 [2] GASKET  
  6F-4926 [2] GASKET  
  7B-2420 [2] FERRULE  
  7B-2419 [2] SEAL  
  2B-7114 [6] YOKE  
  4H-7302 [12] GUIDE  
  0S-1590 [12] BOLT  
  3H-3451 [6] LOCK  
  2F-2553 [12] LIFTER  
  9H-1022 [6] STUD  
  7B-1756 [6] NUT  
  8F-4994 [6] SEAL  
  3F-8526 [6] WASHER  
  3B-7302 [6] BOLT  
  1B-4205 [6] NUT  
  3B-4508 [6] LOCKWASHER  
  1B-4204 [12] NUT  
  1A-0744 [12] SCREW  
  3B-4621 [4] COTTER PIN  
  6H-0411 [8] WASHER  
  1B-9917 [4] SPRING  
  2A-1278 [6] END  
  1B-4203 [6] NUT  
  6F-4928 [2] BASE  
  5B-7078 [12] ROD ASSEM.  
  6B-4040 [6] ROD  
  2F-8584 [6] BRACKET  
  7B-0290 [1] SCREW  
  0L-0364 [1] LOCK  
  1F-6618 [3] BRACKET  
  6B-6683 [26] NUT  
  9H-1024 [26] WASHER  
  6H-0411 [8] WASHER  
  6B-6224 [24] FERRULE  
  6B-6225 [24] SEAL  
  1A-1884 [4] SPRING  
  2B-7408 [2] PLUG  
  4H-7316 [1] SHAFT  
  7B-0280 [1] SEAL  
 

#UE0332980048
 

CYLINDER HEAD AND VALVE MECHANISM

CYLINDER HEAD AND VALVE MECHANISM--End View--Part 2 of 2
Serial No. 36A1 to 36A1158 inclusive
c62474 UE033298
None CYLINDER HEAD AND VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1B-4206 [6] NUT  
  3B-0622 [4] PLUG  
    (2 IN EACH SHAFT ASSEM.)
  2F-8874 [2] SHAFT ASSEM.  
  7F-7666 [12] ROTOCAP  
  0S-1588 [18] BOLT  
  3B-4506 [18] LOCKWASHER  
  0T-0431 [18] WASHER  
  9H-1020 [12] STUD  
  6F-5263 [12] BUSHING  
    (6 IN EACH HEAD ASSEM.)
  3B-0623 [24] PLUG  
    (12 IN EACH HEAD ASSEM.)
  6B-7021 [6] SEAL  
  5H-7168 [6] RETAINER  
  7H-9984 [2] GASKET  
  4F-5607 [6] SEAL  
  6H-6834 [6] CHAMBER ASSEM.  
  6H-5646 [6] VALVE (INLET)  
  7F-4784 [6] VALVE (EXHAUST)  
  6B-4570 [12] ARM ASSEM.  
  3F-7445 [12] BUSHING  
    (1 IN EACH ARM ASSEM.)
  6B-8505 [12] SLEEVE  
  3B-1142 [12] RETAINER  
  3B-1143 [36] LOCK  
  4F-5408 [12] SPRING  
  4F-5409 [12] SPRING  
  9H-1323 [2] CYLINDER SERVICE HEAD ASSEM.  
  5H-2536 [1] COVER  
  5H-2537 [1] GASKET  
  9H-1288 [24] STUD  
  0L-1351 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  5H-7071 [24] DIRECTOR  
    (12 IN EACH HEAD ASSEM.)
  4H-7379 [2] GASKET  
  5H-2579 [6] GASKET  
  7F-8923 [6] INSERT (INLET)  
  7F-8922 [6] INSERT (EXHAUST)  
    (3 OF EACH IN EACH HEAD ASSEM.)
 

#UE0332980049
 

CYLINDER HEAD AND VALVE MECHANISM

CYLINDER HEAD AND VALVE MECHANISM--Side View--Part 1 of 2
Serial No. 36A1159 to 36A2582 inclusive
Note: 2M143 Valve Grinding Gasket Kit is available
c58290 UE033298
None CYLINDER HEAD AND VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6F-4929 [2] COVER  
  1A-5666 [16] NUT  
  9H-1031 [16] WASHER  
  8H-8670 [2] GASKET  
  6F-4926 [2] GASKET  
  7B-2420 [2] FERRULE  
  7B-2419 [2] SEAL  
  2B-7114 [6] YOKE  
  4H-7302 [12] GUIDE  
  0S-1590 [12] BOLT  
  3H-3451 [6] LOCK  
  9H-6221 [12] LIFTER  
  9H-1022 [6] STUD  
  7B-1756 [6] NUT  
  8F-4994 [6] SEAL  
  3F-8526 [6] WASHER  
  3B-7302 [6] BOLT  
  1B-4205 [6] NUT  
  3B-4508 [6] LOCKWASHER  
  1B-4204 [12] NUT  
  1A-0744 [12] SCREW  
  3B-4621 [4] COTTER PIN  
  6H-0411 [8] WASHER  
  1B-9917 [4] SPRING  
  2A-1278 [6] END  
  1B-4203 [6] NUT  
  6F-4928 [2] BASE  
  9H-6236 [12] ROD ASSEM.  
  6B-4040 [6] ROD  
  2F-8584 [6] BRACKET  
  7B-0290 [1] SCREW  
  0L-0364 [1] LOCK  
  1F-6618 [3] BRACKET  
  6B-6683 [26] NUT  
  9H-1024 [26] WASHER  
  6H-0411 [8] WASHER  
  6B-6224 [24] FERRULE  
  6B-6225 [24] SEAL  
  1A-1884 [4] SPRING  
  2B-7408 [2] PLUG  
  4H-7316 [1] SHAFT  
  7B-0280 [1] SEAL  
 

Information:

Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W715 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/09
Packaging the Turbocharger {1052}
2007/02/26
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog D8H :

TURBOCHARGER ASSEMBLY
2M-5488 TURBOCHARGER ASSEMBLY
TURBOCHARGER ASSEMBLY
2M-5488 TURBOCHARGER ASSEMBLY
MANIFOLDS
MANIFOLDS
EXHAUST EXTENSION
EXHAUST EXTENSION
MANIFOLDS
MANIFOLDS
MANIFOLDS
MANIFOLDS
WATER PRESSURE GAUGE GROUP
9S-2326 WATER PRESSURE GAUGE GROUP
AIR CLEANER
1M-1696 AIR CLEANER
TURBOCHARGER ASSEMBLY
2M-5488 TURBOCHARGER ASSEMBLY
3S-8271 TURBOCHARGER ASSEMBLY
TURBOCHARGER ASSEMBLY
3S-2394 TURBOCHARGER ASSEMBLY
TRANSMISSION OIL COOLER
2M-8190 TRANSMISSION OIL COOLER
TRANSMISSION OIL COOLER
TRANSMISSION OIL COOLER
COMPRESSION RELEASE CONTROL GROUP
9H-4420 COMPRESSION RELEASE CONTROL GROUP
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM

Truck sale:

Caterpillar D8H, Construction
22,300 USD 
Caterpillar D8H, Construction
- Dozers
BLANCHARD MACHINERY CO.
Caterpillar D8H, Construction
26,000 
Caterpillar D8H, Construction
- Dozers
H.O. PENN MACHINERY CO., INC.
CATERPILLAR D8H 1972
 
CATERPILLAR D8H 1972
- TRACK TYPE TRACTORS
H O PENN MCHY
122 Noxon Road - Poughkeepsie - New Yo
 
 
CAT D8H

Don Smock Auction Co.
Pendleton, Indiana 46064
CAT D8H
Call 
CAT D8H

Walker Machinery
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.