CYLINDER HEAD AND VALVE MECHANISM--End View--Part 2 of 2 Serial No. 36A1159 to 36A2582 inclusive D8H

BASIC ENGINE

CYLINDER HEAD GP

0. CYLINDER H
1. CYLINDER H
2. CYLINDER H
3. CYLINDER H
4. CYLINDER H
5. CYLINDER H
6. CYLINDER H
7. CYLINDER H
8. CYLINDER H

CYLINDER BLOCK GP

9. CYLINDER B
0. INFORMATION

TRACK-TYPE TRACTOR D8H TRACK-TYPE TRACTOR 36A
D8 TRACTOR / DIRECT DRIVE / 36A00001-03859 (MACHINE) UE033298 D8H 36A (1958)

BASIC ENGINE

CYLINDER HEAD GP

CYLINDER HEAD AND VALVE MECHANISM

#UE0332980050

CYLINDER HEAD AND VALVE MECHANISM

CYLINDER HEAD AND VALVE MECHANISM--End View--Part 2 of 2
Serial No. 36A1159 to 36A2582 inclusive

c62474 UE033298

None CYLINDER HEAD AND VALVE MECHANISM Parts scheme

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1B-4206	[6]	NUT
3B-0622	[4]	PLUG
		(2 IN EACH SHAFT ASSEM.)
2F-8874	[2]	SHAFT ASSEM.
7F-7666	[12]	ROTOCAP
0S-1588	[18]	BOLT
3B-4506	[18]	LOCKWASHER
0T-0431	[18]	WASHER
9H-1020	[12]	STUD
6F-5263	[12]	BUSHING
		(6 IN EACH HEAD ASSEM.)
3B-0623	[24]	PLUG
		(12 IN EACH HEAD ASSEM.)
6B-7021	[6]	SEAL
5H-7168	[6]	RETAINER
7H-9984	[2]	GASKET
4F-5607	[6]	SEAL
6H-6834	[6]	CHAMBER ASSEM.
6H-5646	[6]	VALVE (INLET)
7F-4784	[6]	VALVE (EXHAUST)
6B-4570	[12]	ARM ASSEM.
3F-7445	[12]	BUSHING
		(1 IN EACH ARM ASSEM.)
6B-8505	[12]	SLEEVE
3B-1142	[12]	RETAINER
3B-1143	[36]	LOCK
4F-5408	[12]	SPRING
4F-5409	[12]	SPRING
9H-1323	[2]	CYLINDER SERVICE HEAD ASSEM.
5H-2536	[1]	COVER
5H-2537	[1]	GASKET
9H-1288	[24]	STUD
0L-1351	[2]	BOLT
3B-4506	[2]	LOCKWASHER
5H-7071	[24]	DIRECTOR
		(12 IN EACH HEAD ASSEM.)
4H-7379	[2]	GASKET
5H-2579	[6]	GASKET
7F-8923	[6]	INSERT (INLET)
7F-8922	[6]	INSERT (EXHAUST)
		(3 OF EACH IN EACH HEAD ASSEM.)

#UE0332980051

CYLINDER HEAD AND VALVE MECHANISM

CYLINDER HEAD AND VALVE MECHANISM--Side View--Part 1 of 2
Serial No. 36A2583 to 36A3299 inclusive
Note: 2M143 Valve Grinding Gasket Kit is available

c58290 UE033298

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
6F-4929	[2]	COVER
1A-5666	[16]	NUT
9H-1031	[16]	WASHER
8H-8670	[2]	GASKET
6F-4926	[2]	GASKET
7B-2420	[2]	FERRULE
7B-2419	[2]	SEAL
2B-7114	[6]	YOKE
4H-7302	[12]	GUIDE
0S-1590	[12]	BOLT
3H-3451	[6]	LOCK
9H-6221	[12]	LIFTER
9H-1022	[6]	STUD
7B-1756	[6]	NUT
8F-4994	[6]	SEAL
3F-8526	[6]	WASHER
3B-7302	[6]	BOLT
1B-4205	[6]	NUT
3B-4508	[6]	LOCKWASHER
1B-4204	[12]	NUT
1A-0744	[12]	SCREW
3B-4621	[4]	COTTER PIN
6H-0411	[8]	WASHER
1B-9917	[4]	SPRING
2A-1278	[6]	END
1B-4203	[6]	NUT
6F-4928	[2]	BASE
9H-6236	[12]	ROD ASSEM.
6B-4040	[6]	ROD
2F-8584	[6]	BRACKET
7B-0290	[1]	SCREW
0L-0364	[1]	LOCK
1F-6618	[3]	BRACKET
6B-6683	[26]	NUT
9H-1024	[26]	WASHER
6H-0411	[8]	WASHER
6B-6224	[24]	FERRULE
6B-6225	[24]	SEAL
1A-1884	[4]	SPRING
2B-7408	[2]	PLUG
4H-7316	[1]	SHAFT
7B-0280	[1]	SEAL

#UE0332980052

CYLINDER HEAD AND VALVE MECHANISM

CYLINDER HEAD AND VALVE MECHANISM--End View--Part 2 of 2
Serial No. 36A2583 to 36A3299 inclusive

c70817 UE033298

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1B-4206	[6]	NUT
3B-0622	[4]	PLUG
		(2 IN EACH SHAFT ASSEM.2F8874)
2F-8874	[2]	SHAFT ASSEM.
0S-1588	[18]	BOLT
3B-4506	[18]	LOCKWASHER
0T-0431	[18]	WASHER
9H-1020	[12]	STUD
3B-0623	[24]	PLUG
		(12 IN EACH HEAD ASSEM.9H1323)
9H-1323	[2]	CYLINDER SERVICE HEAD ASSEM.
7H-9984	[2]	GASKET
7F-8923	[6]	INSERT (INLET)
7F-8922	[6]	INSERT (EXHAUST)
		(3 OF EACH IN EACH HEAD ASSEM. 9H1323)
7F-4784	[6]	VALVE (EXHAUST)
6B-4570	[12]	ARM ASSEM.
3F-7445	[12]	BUSHING
		(1 IN EACH ARM ASSEM. 6B4570)
6B-8505	[12]	SLEEVE
3B-1142	[12]	RETAINER
3B-1143	[36]	LOCK
4F-5408	[12]	SPRING
4F-5409	[12]	SPRING
7F-7666	[12]	ROTOCAP
6F-5263	[12]	BUSHING
		(6 IN EACH HEAD ASSEM. 9H1323)
5M-2705	[6]	RETAINER
4F-5607	[6]	SEAL
6B-7021	[6]	SEAL
9H-1288	[24]	STUD
0L-1351	[2]	BOLT
3B-4506	[2]	LOCKWASHER
5H-2536	[1]	COVER
5H-2537	[1]	GASKET
6H-6834	[6]	CHAMBER ASSEM.
5H-7071	[24]	DIRECTOR
		(12 IN EACH HEAD ASSEM. 9H1323)
5H-2579	[6]	GASKET
4H-7379	[2]	GASKET
6H-5646	[6]	VALVE (INLET)

#UE0332980053

CYLINDER HEAD AND VALVE MECHANISM

CYLINDER HEAD AND VALVE MECHANISM--Side View--Part 1 of 2
Serial No. 36A3300 to 36A3745 and 36A3748 inclusive
Note: 2M143 Valve Grinding Gasket Kit is available

c58290 UE033298

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
6F-4929	[2]	COVER
1A-5666	[16]	NUT
9H-1031	[16]	WASHER
8H-8670	[2]	GASKET
6F-4926	[2]	GASKET
7B-2420	[2]	FERRULE
7B-2419	[2]	SEAL
2B-7114	[6]	YOKE
4H-7302	[12]	GUIDE
0S-1590	[12]	BOLT
3H-3451	[6]	LOCK
9H-6221	[12]	LIFTER
9H-1022	[6]	STUD
7B-1756	[6]	NUT
8F-4994	[6]	SEAL
3F-8526	[6]	WASHER
3B-7302	[6]	BOLT
1B-4205	[6]	NUT
3B-4508	[6]	LOCKWASHER
1B-4204	[12]	NUT
1A-0744	[12]	SCREW
3B-4621	[4]	COTTER PIN
6H-0411	[8]	WASHER
1B-9917	[4]	SPRING
2A-1278	[6]	END
1B-4203	[6]	NUT
6F-4928	[2]	BASE
9H-6236	[12]	ROD ASSEM.
6B-4040	[6]	ROD
2F-8584	[6]	BRACKET
7B-0290	[1]	SCREW
0L-0364	[1]	LOCK
1F-6618	[3]	BRACKET
6B-6683	[26]	NUT
9H-1024	[26]	WASHER
6H-0411	[8]	WASHER
6B-6224	[24]	FERRULE
6B-6225	[24]	SEAL
1A-1884	[4]	SPRING
2B-7408	[2]	PLUG
4H-7316	[1]	SHAFT
7B-0280	[1]	SEAL

#UE0332980054

CYLINDER HEAD AND VALVE MECHANISM

CYLINDER HEAD AND VALVE MECHANISM--End View--Part 2 of 2
Serial No. 36A3300 to 36A3745 and 36A3748 inclusive

c70818 UE033298

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1B-4206	[6]	NUT
3B-0622	[4]	PLUG
		(2 IN EACH SHAFT ASSEM.2F8874)
2F-8874	[2]	SHAFT ASSEM.
0S-1588	[18]	BOLT
3B-4506	[18]	LOCKWASHER
0T-0431	[18]	WASHER
9H-1020	[12]	STUD
3B-0623	[24]	PLUG
		(12 IN EACH HEAD ASSEM.7M285)
7M-0285	[2]	CYLINDER SERVICE HEAD ASSEM.
7H-9984	[2]	GASKET
7F-8923	[6]	INSERT (INLET)
7F-8922	[6]	INSERT (EXHAUST)
		(3 OF EACH IN EACH HEAD ASSEM. 7M285)
8H-1994	[6]	VALVE (EXHAUST)
6B-4570	[12]	ARM ASSEM.
3F-7445	[12]	BUSHING
		(1 IN EACH ARM ASSEM. 6B4570)
6B-8505	[12]	SLEEVE
3B-1142	[12]	RETAINER
3B-1143	[36]	LOCK
7F-7991	[12]	SPRING
7F-7990	[12]	SPRING
8F-8388	[12]	ROTATOR
5M-8026	[12]	BUSHING
		(6 IN EACH HEAD ASSEM. 7M285)
5M-2705	[6]	RETAINER
4F-5607	[6]	SEAL
6B-7021	[6]	SEAL
9H-1288	[24]	STUD
0L-1351	[2]	BOLT
3B-4506	[2]	LOCKWASHER
5H-2536	[1]	COVER
5H-2537	[1]	GASKET
6H-6834	[6]	CHAMBER ASSEM.
5H-7071	[24]	DIRECTOR
		(12 IN EACH HEAD ASSEM. 7M285)
5H-2579	[6]	GASKET
7H-1581	[2]	GASKET
8H-1993	[6]	VALVE (INLET)

#UE0332980055

CYLINDER HEAD AND VALVE MECHANISM

CYLINDER HEAD AND VALVE MECHANISM--Side View--Part 1 of 2
Serial No. 36A3746, 36A3747, 36A3749 to 36A3782 and 36A3785 inclusive
Note: 2S9356 Valve Grinding Gasket Kit is available

c84983 UE033298

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
6F-4929	[2]	COVER
1A-5666	[16]	NUT
9H-1031	[16]	WASHER
9M-2617	[2]	GASKET
1A-1884	[4]	SPRING
2B-7408	[2]	PLUG
7B-2420	[2]	FERRULE
7B-2419	[2]	SEAL
4H-7316	[1]	SHAFT
7B-0280	[1]	SEAL
2B-7114	[6]	YOKE
4H-7302	[12]	GUIDE
0S-1590	[12]	BOLT
3H-3451	[6]	LOCK
9H-6221	[12]	LIFTER
9H-1022	[6]	STUD
7B-1756	[6]	NUT
8F-4994	[6]	SEAL
3F-8526	[6]	WASHER
3B-7302	[6]	BOLT
1B-4205	[6]	NUT
3B-4508	[6]	LOCKWASHER
1B-4204	[12]	NUT
1A-0744	[12]	SCREW
3B-4621	[4]	COTTER PIN
6H-0411	[8]	WASHER
1B-9917	[4]	SPRING
2A-1278	[6]	END
1B-4203	[6]	NUT
9M-2314	[2]	BASE
9H-6236	[12]	ROD ASSEM.
6B-4040	[6]	ROD
2F-8584	[6]	BRACKET
7B-0290	[1]	SCREW
0L-0364	[1]	LOCK
1F-6618	[3]	BRACKET
6B-6683	[26]	NUT
9H-1024	[26]	WASHER
6H-0411	[8]	WASHER
6B-6224	[24]	FERRULE
6B-6225	[24]	SEAL
0S-1591	[10]	BOLT
3B-4506	[10]	LOCKWASHER
0T-0431	[10]	BOLT

#UE0332980056

CYLINDER HEAD AND VALVE MECHANISM

CYLINDER HEAD AND VALVE MECHANISM--End View--Part 2 of 2
Serial No. 36A3746, 36A3747, 36A3749 to 36A3782 and 36A3785 inclusive

c87561 UE033298

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1B-4206	[6]	NUT
3B-0622	[4]	PLUG
		(2 IN EACH SHAFT ASSEM.2F8874)
2F-8874	[2]	SHAFT ASSEM.
0L-2070	[14]	BOLT
3B-4506	[14]	LOCKWASHER
0T-0431	[14]	WASHER
9H-1020	[12]	STUD
3B-0623	[24]	PLUG
		(12 IN EACH HEAD ASSEM.7M285)
7M-0285	[2]	CYLINDER SERVICE HEAD ASSEM.
9M-7303	[2]	GASKET
7F-8923	[6]	INSERT (INLET)
7F-8922	[6]	INSERT (EXHAUST)
		(3 OF EACH IN EACH HEAD ASSEM. 7M285)
8H-1994	[6]	VALVE (EXHAUST)
6B-4570	[12]	ARM ASSEM.
3F-7445	[12]	BUSHING
		(1 IN EACH ARM ASSEM. 6B4570)
6B-8505	[12]	SLEEVE
3B-1142	[12]	RETAINER
3B-1143	[36]	LOCK
9M-5350	[12]	SPRING
9M-5349	[12]	SPRING
8M-7155	[2]	GASKET
8F-8388	[12]	ROTATOR
1S-6653	[6]	BUSHING (EXHAUST)
1S-9910	[6]	BUSHING (INLET)
		(3 OF EACH IN EACH HEAD ASSEM. 7M285)
5M-2705	[6]	RETAINER
6B-7021	[6]	SEAL
9H-1288	[24]	STUD
4F-5607	[6]	SEAL
9M-8025	[6]	CHAMBER ASSEM.
5H-7071	[24]	DIRECTOR
		(12 IN EACH HEAD ASSEM. 7M285)
5H-2579	[6]	GASKET
1S-4390	[2]	GASKET
8H-1993	[6]	VALVE (INLET)

#UE0332980057

CYLINDER HEAD AND VALVE MECHANISM

CYLINDER HEAD AND VALVE MECHANISM--Side View--Part 1 of 2
Serial No. 36A3783, 36A3784 and 36A3786-Up
Note: 2S9356 Valve Grinding Gasket Kit is available

c84353 UE033298

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
9M-2315	[2]	COVER
1A-5666	[16]	NUT
9H-1031	[16]	WASHER
9M-2617	[2]	GASKET
1A-1884	[4]	SPRING
2B-7408	[2]	PLUG
7B-2420	[2]	FERRULE
7B-2419	[2]	SEAL
4H-7316	[1]	SHAFT
7B-0280	[1]	SEAL
2B-7114	[6]	YOKE
4H-7302	[12]	GUIDE
0S-1590	[12]	BOLT
3H-3451	[6]	LOCK
9H-6221	[12]	LIFTER
9H-1022	[6]	STUD
7B-1756	[6]	NUT
8F-4994	[6]	SEAL
3F-8526	[6]	WASHER
3B-7302	[6]	BOLT
1B-4205	[6]	NUT
3B-4508	[6]	LOCKWASHER
1B-4204	[12]	NUT
1A-0744	[12]	SCREW
3B-4621	[4]	COTTER PIN
6H-0411	[8]	WASHER
1B-9917	[4]	SPRING
2A-1278	[6]	END
1B-4203	[6]	NUT
9M-2314	[2]	BASE
9H-6236	[12]	ROD ASSEM.
6B-4040	[6]	ROD
2F-8584	[6]	BRACKET
7B-0290	[1]	SCREW
0L-0364	[1]	LOCK
1F-6618	[3]	BRACKET
6B-6683	[26]	NUT
9H-1024	[26]	WASHER
6H-0411	[8]	WASHER
6B-6224	[24]	FERRULE
6B-6225	[24]	SEAL
0S-1591	[10]	BOLT
3B-4506	[10]	LOCKWASHER
0T-0431	[10]	BOLT

#UE0332980058

CYLINDER HEAD AND VALVE MECHANISM

CYLINDER HEAD AND VALVE MECHANISM--End View--Part 2 of 2
Serial No. 36A3783, 36A3784 and 36A3786-Up

c75869 UE033298

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1B-4206	[6]	NUT
3B-0622	[4]	PLUG
		(2 IN EACH SHAFT ASSEM 2F8874)
2F-8874	[2]	SHAFT ASSEM
0L-2070	[14]	BOLT
3B-4506	[14]	LOCKWASHER
0T-0431	[14]	WASHER
9H-1020	[12]	STUD
3B-0623	[28]	PLUG
		(14 IN EACH HEAD ASSEM 7M285)
7M-0285	[2]	CYLINDER SERVICE HEAD ASSEM
9M-7303	[2]	GASKET
7F-8923	[6]	INSERT (INLET)
7F-8922	[6]	INSERT (EXHAUST)
		(3 OF EACH IN EACH HEAD ASSEM 7M285)
8H-1994	[6]	VALVE (EXHAUST)
6B-4570	[12]	ARM ASSEM
3F-7445	[12]	BUSHING
		(1 IN EACH ARM ASSEM 6B4570)
6B-8505	[12]	SLEEVE
3B-1142	[12]	RETAINER
3B-1143	[36]	LOCK
9M-5350	[12]	SPRING
9M-5349	[12]	SPRING
9M-2616	[2]	GASKET
8M-7637	[12]	ROTATOR
1S-6653	[6]	BUSHING (EXHAUST)
1S-9910	[6]	BUSHING (INLET)
		(3 OF EACH IN EACH HEAD ASSEM 7M285)
6B-7021	[6]	SEAL
9H-1288	[24]	STUD
4F-5607	[6]	SEAL
5M-2705	[6]	RETAINER
9M-8025	[6]	CHAMBER ASSEM
5H-7071	[24]	DIRECTOR
		(12 IN EACH HEAD ASSEM 7M285)
5H-2579	[6]	GASKET
1S-4390	[2]	GASKET
8H-1993	[6]	VALVE (INLET)

#UE0332980059

CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS--Side View--Part 1 of 2
Serial No. 36A1 to 36A3126 inclusive
2M8101 Cylinder Block Assembly parts are shown on Page 26. Note: 1M7215 Piston and Liner Group, 2M141 Cylinder Liner and Piston Replacement
Gasket Kit and 2M143 Valve Grinding Gasket Kit are available. Piston and Liner replacement require the use of 2M141 and 2M143 Gasket Kits

c66879 UE033298

None CYLINDER BLOCK AND COVERS Parts scheme

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
8B-0375	[6]	LINER
7B-2126	[18]	SEAL
2A-0762	[2]	BOLT
3B-4504	[2]	LOCKWASHER
4H-9644	[1]	POINTER
4B-2764	[1]	COVER
2H-4054	[1]	GASKET
0L-1351	[4]	BOLT
3B-4506	[4]	LOCKWASHER
5M-3673	[10]	NUT
5M-3695	[10]	LOCK
3B-1915	[2]	BOLT
3B-4506	[2]	LOCKWASHER
2M-7961	[1]	GASKET
0V-0155	[2]	STUD
0L-0187	[12]	STUD
6F-4161	[2]	DOWEL
		(PARTS OF HOUSING ASSEM 2M8103)
4F-4879	[4]	BOLT
0L-0364	[4]	LOCK
7F-4363	[1]	SLINGER
7F-4364	[1]	GASKET
2M-8103	[1]	HOUSING ASSEM.
1A-0458	[4]	BOLT
3B-4512	[4]	LOCKWASHER
4F-1450	[12]	STUD
		(PART OF HOUSING ASSEM 2M8103)
6F-5282	[2]	BOLT
3B-4508	[2]	LOCKWASHER
6B-9551	[1]	STUD
		(PART OF PAN ASSEM 7H7201)
7H-7201	[1]	PAN ASSEM
0S-1595	[1]	BOLT
0S-1595	[9]	BOLT
3B-4508	[10]	LOCKWASHER
9B-3133	[1]	GASKET
0L-0827	[1]	PLUG
0L-1124	[1]	GASKET
3H-3285	[1]	FERRULE
		(PART OF PAN ASSEM 5H2738)
3H-3385	[1]	RING
2M-8101 Y	[1]	BLOCK ASSEM
		(SEE SEPARATE ILLUS. FOR PARTS)
0S-1594	[42]	BOLT
3B-4506	[42]	LOCKWASHER
1M-0988	[1]	COVER ASSEM.
4H-8781	[1]	GASKET
4H-8986	[1]	WASHER
7B-5415	[2]	PIN
4H-9640	[1]	BEARING
		(PARTS OF COVER ASSEM 4H9630)
4H-9630	[1]	COVER ASSEM
4H-9629	[1]	GASKET
3B-1915	[6]	BOLT
3B-4506	[6]	LOCKWASHER
2B-2695	[1]	BOLT
1D-4716	[1]	NUT
3B-4505	[1]	LOCKWASHER
1M-4239	[1]	CLAMP
0S-1595	[4]	BOLT (1 1/4" LONG)
7B-3235	[1]	BOLT (1 3/8" LONG)
3B-4508	[42]	LOCKWASHER
0S-1585	[37]	BOLT
5B-5812	[2]	DOWEL
		(PART OF PAN ASSEM 5H2738)
5H-2738	[1]	PAN ASSEM
0S-0509	[39]	BOLT (3/4" LONG)
0L-1351	[1]	BOLT (7/8" LONG)
3B-4506	[40]	LOCKWASHER
3B-8017	[2]	GASKET
3B-8013	[2]	COVER
0S-1584	[4]	BOLT
1B-4205	[4]	NUT
3B-4508	[4]	LOCKWASHER
4M-4409	[1]	GASKET
Y		SEPARATE ILLUSTRATION

Information:

BASIC ENGINE

CYLINDER HEAD GP

Special Instruction

Reconditioning Of Cylinder Heads For Use On Spacer Plate Cylinder Blocks{1101}
Reconditioning Of Cylinder Heads For Use On Spacer Plate Cylinder Blocks{1101}

Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}

Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}

Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}

Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}

Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Tool Operating Manual

Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}

Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}

188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}

CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

Service Magazine

Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29

Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17

Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07

Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16

Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22

Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16

Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30

Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06

Use New Tools To Adapt Former Cylinder Heads With Counterbores To Cylinder Blocks With Spacer Plates{0600,1100,1101,1201}
1978/05/22

A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08

Caterpillar Parts SIS Catalog D8H :

CYLINDER HEAD AND VALVE MECHANISM

9H-4420 COMPRESSION RELEASE CONTROL GROUP

TRANSMISSION OIL COOLER

2M-8190 TRANSMISSION OIL COOLER

3S-2394 TURBOCHARGER ASSEMBLY

3S-8271 TURBOCHARGER ASSEMBLY

CYLINDER HEAD AND VALVE MECHANISM

Truck sale:

22,300 USD

Caterpillar D8H, Construction
- Dozers
BLANCHARD MACHINERY CO.

26,000

Caterpillar D8H, Construction
- Dozers
H.O. PENN MACHINERY CO., INC.

CATERPILLAR D8H 1972
- TRACK TYPE TRACTORS
H O PENN MCHY
122 Noxon Road - Poughkeepsie - New Yo

CAT D8H

Don Smock Auction Co.
Pendleton, Indiana 46064

Call

CAT D8H

Walker Machinery