AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CYLINDER BLOCK AND COVERS--Front View--Part 2 of 2 Serial No. 36A1 to 36A3126 inclusive D8H TRACK-TYPE TRACTOR


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP
PISTON & ROD GP

TRACK-TYPE TRACTOR D8H TRACK-TYPE TRACTOR 36A
 D8 TRACTOR / DIRECT DRIVE / 36A00001-03859 (MACHINE) UE033298 D8H 36A   (1958)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK ASSEMBLY
2M-8101 CYLINDER BLOCK ASSEMBLY
 

#UE0332980060
 

CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS--Front View--Part 2 of 2
Serial No. 36A1 to 36A3126 inclusive
c87670 UE033298
None CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1M-6047 [1] PLUNGER ASSEM.  
  1M-4239 [1] CLAMP  
  1A-2029 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
  1S-4388 [1] HOUSING ASSEM.  
  4H-9640 [1] BEARING  
  4H-8986 [2] WASHER  
  7B-5415 [4] PIN  
    (PARTS OF HOUSING ASSEM. 1S4388)
  0L-1351 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  2A-4522 [1] COVER  
  2A-4448 [1] GASKET  
  7H-2323 [1] GASKET  
  1M-6098 [1] TUBE  
    (PART OF COVER ASSEM. 9H6102)
  0L-1351 [5] BOLT  
  3B-4506 [5] LOCKWASHER  
  4H-9640 [2] BEARING  
  5H-1092 [1] SPACER  
    (PARTS OF HOUSING ASSEM.1S4388)
  4H-9527 [1] COVER  
  4H-9628 [1] GASKET  
  9H-6102 [1] COVER ASSEM.  
  0S-1588 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
  1A-2029 [34] BOLT  
  3B-4506 [34] LOCKWASHER  
  5H-1088 [1] COVER (FRONT)  
  7H-9829 [1] COVER (REAR)  
  4H-9576 [2] GASKET  
  2H-8829 [1] PLUG  
  4F-9325 [1] GASKET  
  2A-3348 [2] DOWEL  
    (PART OF HOUSING ASSEM. 1S4388)
  0S-1588 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  1A-5183 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  2B-4602 [1] PLUG  
  2A-5349 [5] STUD  
    (PART OF HOUSING ASSEM. 1S4388)
  0T-0199 [1] PLUG  
  3F-7473 [1] BEARING (INNER)  
  3F-7474 [1] BEARING (OUTER)  
    (PARTS OF HOUSING ASSEM. 1S4388)
  2B-8460 [1] COVER  
  2B-6924 [1] GASKET  
  0S-1594 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  4F-0389 [1] BUSHING ASSEM.  
  4H-3740 [1] COVER  
  3B-8024 [2] GASKET  
  5H-8177 [1] PLUG  
  1F-7178 [1] GASKET  
  0S-1594 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
 

#UE0332980061
 

CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS--Side View--Part 1 of 2
Effective with Serial No. 36A3127. 2M8101 Cylinder Block Assembly parts are shown on Page 26
Note: 1M7215 Piston and Liner Group, 2M141 Cylinder Liner and Piston Replacement Gasket Kit and 2M143 Valve Grinding Gasket Kit are available
Piston and Liner Replacement require the use of 2M141 and 2M143 Gasket Kits
c84241 UE033298
None CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8B-0375 [6] LINER  
  7B-2126 [18] SEAL  
  9H-9077 [4] BOSS  
    (PART OF COVER ASSEM. 7M7412)
  2A-0762 [2] BOLT  
  3B-4504 [2] LOCKWASHER  
  4H-9644 [1] POINTER  
  4B-2764 [1] COVER  
  2H-4054 [1] GASKET  
  0L-1351 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  5M-3673 [10] NUT  
  5M-3695 [10] LOCK  
  3B-1915 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  3D-0472 [1] STUD  
    (PART OF HOUSING ASSEM. 9M3609)
  2M-7961 [1] GASKET  
  0V-0155 [2] STUD  
  2D-8426 [11] STUD  
  2B-2994 [2] DOWEL  
    (PARTS OF HOUSING ASSEM. 9M3609)
  0T-0102 [4] BOLT  
  0L-0364 [4] LOCK  
  7F-4363 [1] SLINGER  
  7F-4364 [1] GASKET  
  9M-3609 [1] HOUSING ASSEM.  
  1A-0458 [4] BOLT  
  3B-4512 [4] LOCKWASHER  
  9H-1020 [12] STUD  
    (PART OF HOUSING ASSEM. 9M3609)
  6F-5282 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  6B-9551 [1] STUD  
    (PART OF PAN ASSEM. 7H7201)
  7H-7201 [1] PAN ASSEM.  
  0S-1595 [1] BOLT  
  0S-1595 [9] BOLT  
  3B-4508 [10] LOCKWASHER  
  9B-3133 [1] GASKET  
  0L-0827 [1] PLUG  
  0L-1124 [1] GASKET  
  3H-3285 [1] FERRULE  
    (PART OF PAN ASSEM. 9M3920)
  3H-3385 [1] RING  
  2M-8101 Y [1] BLOCK ASSEM.  
    (SEE SEPARATE ILLUSTRATION)
  0S-1594 [42] BOLT  
  3B-4506 [42] LOCKWASHER  
  1M-0988 [1] COVER ASSEM.  
  4H-8781 [1] GASKET  
  4H-8986 [1] WASHER  
  7B-5415 [2] PIN  
  4H-9640 [1] BEARING  
    (PARTS OF COVER ASSEM. 6H6803)
  6H-6803 [1] COVER ASSEM.  
  4H-9629 [1] GASKET  
  3B-1915 [6] BOLT  
  3B-4506 [6] LOCKWASHER  
  3B-8013 [1] COVER  
  2B-2695 [1] BOLT  
  1D-4716 [1] NUT  
  3B-4505 [1] LOCKWASHER  
  1M-4239 [1] CLAMP  
  0S-1595 [4] BOLT (1.25" LONG)  
  7B-3235 [1] BOLT (1.375" LONG)  
  3B-4508 [42] LOCKWASHER  
  0S-1585 [37] BOLT  
  5B-5812 [2] DOWEL  
    (PART OF PAN ASSEM. 9M3920)
  9M-3920 [1] PAN ASSEM.  
  0S-0509 [39] BOLT (.75" LONG)  
  0L-1351 [1] BOLT (.875" LONG)  
  3B-4506 [40] LOCKWASHER  
  3B-8017 [2] GASKET  
  7M-7412 [1] COVER ASSEM.  
  0S-1584 [4] BOLT  
  1B-4205 [4] NUT  
  3B-4508 [4] LOCKWASHER  
  4M-4409 [1] GASKET  
  Y   SEPARATE ILLUSTRATION
 

#UE0332980062
 

CYLINDER BLOCK AND COVERS

CYLINDER BLOCK AND COVERS--Front View--Part 2 of 2
Effective with Serial No. 36A3127
c87670 UE033298
None CYLINDER BLOCK AND COVERS Parts scheme
  For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1M-6047 [1] PLUNGER ASSEM.  
  1M-4239 [1] CLAMP  
  1A-2029 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
  1S-4388 [1] HOUSING ASSEM.  
  4H-9640 [1] BEARING  
  4H-8986 [2] WASHER  
  7B-5415 [4] PIN  
    (PARTS OF HOUSING ASSEM. 1S4388)
  0L-1351 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  2A-4522 [1] COVER  
  2A-4448 [1] GASKET  
  7H-2323 [1] GASKET  
  1M-6098 [1] TUBE  
    (PART OF COVER ASSEM. 9H6102)
  0L-1351 [5] BOLT  
  3B-4506 [5] LOCKWASHER  
  4H-9640 [2] BEARING  
  5H-1092 [1] SPACER  
    (PARTS OF HOUSING ASSEM.1S4388)
  4H-9527 [1] COVER  
  4H-9628 [1] GASKET  
  9H-6102 [1] COVER ASSEM.  
  0S-1588 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
  1A-2029 [34] BOLT  
  3B-4506 [34] LOCKWASHER  
  5H-1088 [1] COVER (FRONT)  
  7H-9829 [1] COVER (REAR)  
  4H-9576 [2] GASKET  
  2H-8829 [1] PLUG  
  4F-9325 [1] GASKET  
  2A-3348 [2] DOWEL  
    (PART OF HOUSING ASSEM. 1S4388)
  0S-1588 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  1A-5183 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  2B-4602 [1] PLUG  
  2A-5349 [5] STUD  
    (PART OF HOUSING ASSEM. 1S4388)
  0T-0199 [1] PLUG  
  3F-7473 [1] BEARING (INNER)  
  3F-7474 [1] BEARING (OUTER)  
    (PARTS OF HOUSING ASSEM. 1S4388)
  2B-8460 [1] COVER  
  2B-6924 [1] GASKET  
  0S-1594 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  4F-0389 [1] BUSHING ASSEM.  
  4H-3740 [1] COVER  
  3B-8024 [2] GASKET  
  5H-8177 [1] PLUG  
  1F-7178 [1] GASKET  
  0S-1594 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
 

#UE0332980063
 

2M-8101: CYLINDER BLOCK ASSEMBLY

2M8101 CYLINDER BLOCK ASSEMBLY
Part of Cylinder Block and Covers shown on Page 24
c83261 UE033298
2M8101 CYLINDER BLOCK ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5H-2786 [2] TUBE  
  1H-4004 [6] STUD (2.687" LONG)  
  4B-5037 [2] STUD (6.25" LONG)  
  0L-1547 [1] NUT  
  5H-4390 [1] SLEEVE  
    (PARTS OF TUBE ASSEM. 4H8795)
  4H-8795 [1] TUBE ASSEM.  
  1F-1344 [1] NUT  
    (PART OF FITTING 3B8995)
  4F-6024 [1] DOWEL  
  3B-8995 [1] FITTING  
  0S-0519 [1] PLUG  
  4B-3251 [10] STUD  
  5B-7652 [5] DOWEL  
    (1 IN EACH CAP GROUP 9F2745 & 9F2749)
  2B-2414 [1] PACKING  
  2B-2994 [2] PIN  
  3B-7614 [2] BOLT  
  9H-1080 [2] STUD  
  8M-3081 [2] NUT  
  6F-5264 [2] COTTER PIN  
  9H-1079 [2] STUD  
  6B-6162 [2] NUT  
  6H-5800 [2] COTTER PIN  
  9F-2745 [1] CAP GROUP  
  9F-2222 [2] SHIM (LARGE)  
  9F-2223 [6] SHIM (SMALL)  
    (PARTS OF CAP GROUP 9F2745)
  5H-4302 [1] CAP GROUP  
  5H-4300 [2] SHIM (LARGE)  
  5H-4301 [6] SHIM (SMALL)  
  5B-5812 [1] DOWEL  
    (PARTS OF CAP GROUP 5H4302)
  9H-1081 [12] STUD  
  6B-6162 [12] NUT  
  6H-5800 [12] COTTER PIN  
  9H-1078 [26] STUD (7.25" LONG)  
    -OR-
  9M-0488 [26] STUD (8" LONG)  
  4H-7297 [1] TUBE ASSEM.  
  5H-4390 [1] SLEEVE  
    (PART OF TUBE ASSEM. 4H7297)
  0L-2061 [4] DOWEL  
  9H-6133 [1] PLUG  
  8F-8523 [3] BUSHING  
  2A-3798 [2] DOWEL  
  0L-1547 [1] NUT  
  5H-2766 [1] STUD  
  2A-3349 [1] FERRULE  
  7B-5415 [2] PIN  
  4H-8986 [1] WASHER  
  5H-1092 [1] SPACER  
  4H-9640 [2] BUSHING  
  1A-5919 [2] DOWEL  
  9F-2751 [1] CAP GROUP  
  9F-2226 [2] SHIM (LARGE)  
  9F-2227 [6] SHIM (SMALL)  
  5B-7652 [1] DOWEL  
    (PARTS OF CAP GROUP 9F2751)
  9F-2749 [4] CAP GROUP  
  8F-3439 [8] SHIM (LARGE)  
    (2 IN EACH CAP GROUP 9F2749)
  8F-3440 [24] SHIM (SMALL)  
    (6 IN EACH CAP GROUP 9F2749)
 

#UE0332980064
 

8M-3477: CRANKSHAFT REPLACEMENT GEAR GROUP

8M3477 CRANKSHAFT REPLACEMENT GEAR GROUP
c80897 UE033298
8M3477 CRANKSHAFT REPLACEMENT GEAR GROUP Parts scheme
  For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5H-4728 [1] LOCK  
    (1.531" SPACE BETWEEN HOLES)
  5H-4695 [3] LOCK  
    (1.718" SPACE BETWEEN HOLES)
  [1] GEAR  
  [1] FORM  
    (INSTRUCTION)
  0S-1584 [8] BOLT  
 

#UE0332980065
 

CRANKSHAFT

CRANKSHAFT
Effective with Serial No. 36A3216
c75868 UE033298
None CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6H-4498 [1] SEAL  
  6H-4510 [1] BEARING ASSEM  
  6B-6863 [4] DOWEL  
    (2 IN EACH ASSEM. 6H4510 AND 4H5510)
  4M-0447 [1] CRANKSHAFT  
  4H-5510 [1] BEARING ASSEM.  
  6H-4497 [1] SCREW  
  1D-5165 [1] KEY  
  0S-1587 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
  6H-9095 [1] DAMPER  
  6F-1931 [1] BEARING ASSEM.  
  6B-6863 [10] DOWEL  
    (2 IN EACH ASSEM. 6F1932 AND 6F1931)
  6F-1932 [4] BEARING ASSEM.  
  8H-7319 [1] SEAL  
  2B-4705 [1] BOLT  
  0L-1865 [1] LOCK  
  2M-7864 [1] PULLEY  
 

#UE0332980066
 

CRANKSHAFT

CRANKSHAFT
Serial No. 36A1 to 36A3215 inclusive
c95973 UE033298
None CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8M-0777 [1] GEAR (145 TEETH)  
  0S-1591 [12] BOLT  
  [12] LOCK  
    (PARTS OF FLYWHEEL ASSEM. 4H8832)
  4H-8832 [1] FLYWHEEL ASSEM.  
  7F-8975 [6] BOLT  
  3F-6719 [3] LOCK  
  3H-2257 [1] SLINGER  
  0S-0509 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  6H-4498 [1] SEAL  
  6B-6863 [4] DOWEL  
    (2 IN EACH BEARING ASSEM. 6H4510 AND 4H5510)
  6H-4510 [1] BEARING ASSEM.  
  4M-0447 [1] CRANKSHAFT  
  4H-5510 [1] BEARING ASSEM  
  6H-4497 [1] SCREW  
  1D-5165 [1] KEY  
  0S-1587 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
  6H-9095 [1] DAMPER  
  6F-1931 [1] BEARING ASSEM.  
  6B-6863 [10] DOWEL  
    (2 IN EACH BEARING ASSEM. 6F1932 AND 6F1931)
  6F-1932 [4] BEARING ASSEM.  
  1S-7682 [1] SEAL  
  2B-4705 [1] BOLT  
  0L-1865 [1] LOCK  
  2M-7864 [1] PULLEY  
 

#UE0332980067
 

7H-6755: CRANKSHAFT BEARING REPLACEMENT GROUP

7H6755 Crankshaft Bearing Replacement Group
For use with Standard Crankshaft
UE0332980067 UE033298
  For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#UE0332980068
 

CONNECTING ROD AND PISTON

CONNECTING ROD AND PISTON--6 Required
Serial No. 36A1 to 36A267 inclusive
Note: 1M7215 Piston and Liner Group consisting of: 1--Piston Assembly.
1--Liner and 3--Seal is available
c58325 UE033298
None CONNECTING ROD AND PISTON Parts scheme
  For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6F-3443 [1] BUSHING  
  5B-2681 [2] DOWEL  
    (PARTS OF ASSEM. 8H5322)
  2M-6499 [1] BEARING (STD.)  
  2M-6500 [1] BEARING (.025" U''SIZE)  
  2M-6501 [1] BEARING (.050" U''SIZE)  
  6H-8626 [1] RING (COMP.)  
  5H-1508 [2] RING (COMP.)  
  1H-2709 [1] RING (OIL)  
    (PARTS OF ASSEM. 6H6745)
  6H-6745 [1] PISTON ASSEM.  
  6B-2291 [2] RETAINER  
  3H-6767 [1] PIN  
  8H-5322 [1] ROD ASSEM.  
  4H-9841 [2] BOLT  
  1A-5660 [2] NUT  
  6F-5264 [2] COTTER PIN  
    (PARTS OF ASSEM. 8H5322)
 

#UE0332980069
 

8H-4645: CONNECTING ROD AND PISTON GROUP

8H4645 CONNECTING ROD AND PISTON GROUP--6 Required
Serial No. 36A268 to 36A3215 inclusive
c91203 UE033298
8H4645 CONNECTING ROD AND PISTON GROUP Parts scheme
  For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6F-3443 [1] BUSHING  
  5B-2681 [2] DOWEL  
    (PARTS OF ROD ASSEM. 7M4835)
  2M-6499 [1] BEARING (STD.)  
  2M-6500 [1] BEARING (.025" U SIZE)  
  2M-6501 [1] BEARING (.050" U SIZE)  
  2M-8108 [1] RING GROUP  
    (CONSISTS OF COMPLETE SET OF RINGS FOR ONE PISTON)
  5M-4281 [1] RING (COMP.)  
  5H-1508 [2] RING (COMP.)  
  5M-5697 [1] RING (OIL)  
    (PARTS OF PISTON ASSEM. 1M3495)
  1M-3495 [1] PISTON ASSEM.  
  7M-4926 [2] RETAINER  
  3H-6767 [1] PIN  
  7M-4835 [1] ROD ASSEM.  
  4H-9841 [2] BOLT  
  1A-5660 [2] NUT  
  1S-0686 [2] COTTER PIN  
    (PARTS OF ROD ASSEM. 7M4835)
 

Information:

Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Installation Of Cylinder Block Service Groups And Cylinder Block Hardware Kits{1201}
Installation Of Cylinder Block Service Groups And Cylinder Block Hardware Kits{1201}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Reconditioning Of Cylinder Heads For Use On Spacer Plate Cylinder Blocks{1101}
Reconditioning Of Cylinder Heads For Use On Spacer Plate Cylinder Blocks{1101}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 6V4840 Tool Group To Install Water Ferrules{1201}
Use Of 6V4840 Tool Group To Install Water Ferrules{1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Magazine
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Tools To Adapt Former Cylinder Heads With Counterbores To Cylinder Blocks With Spacer Plates{0600,1100,1101,1201}
1978/05/22
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Liner Seat Inserts For Spacer Plate Cylinder Blocks Are Made Of Stainless Steel{1217,1201,0663}
1979/10/01
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Caterpillar Parts SIS Catalog D8H :

CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK ASSEMBLY
2M-8101 CYLINDER BLOCK ASSEMBLY
CRANKSHAFT REPLACEMENT GEAR GROUP
8M-3477 CRANKSHAFT REPLACEMENT GEAR GROUP
CRANKSHAFT
CRANKSHAFT
CRANKSHAFT
CRANKSHAFT
7H-6755 CRANKSHAFT BEARING REPLACEMENT GROUP
CONNECTING ROD AND PISTON
CONNECTING ROD AND PISTON

Truck sale:

Caterpillar D8H, Construction
22,300 USD 
Caterpillar D8H, Construction
- Dozers
BLANCHARD MACHINERY CO.
Caterpillar D8H, Construction
26,000 
Caterpillar D8H, Construction
- Dozers
H.O. PENN MACHINERY CO., INC.
CATERPILLAR D8H 1972
 
CATERPILLAR D8H 1972
- TRACK TYPE TRACTORS
H O PENN MCHY
122 Noxon Road - Poughkeepsie - New Yo
 
 
CAT D8H

Don Smock Auction Co.
Pendleton, Indiana 46064
CAT D8H
Call 
CAT D8H

Walker Machinery
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.