TRANSMISSION AND STEERING CLUTCH OIL SYSTEM--Part 1 of 3 Effective with Serial No. 36A3740 5M6701 Oil Pump Group parts are shown on Page 80 ADDITIONAL PARTS ARE SHOWN ON PAGES 78P AND 79 D8H

TRANSMISSION AND STEERING CLUTCH OIL SYSTEM--Part 1 of 3
Effective with Serial No. 36A3740
5M6701 Oil Pump Group parts are shown on Page 80
ADDITIONAL PARTS ARE SHOWN ON PAGES 78P AND 79

c83978 UE033298

None TRANSMISSION AND STEERING CLUTCH OIL SYSTEM Parts scheme

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
0S-1594	[2]	BOLT
3B-4506	[2]	LOCKWASHER
9H-3424	[1]	GASKET
9H-3425	[1]	COVER
9H-4204	[1]	SPRING
6H-7378	[1]	RING
9H-3443	[1]	SPOOL
0S-1591	[2]	BOLT
1D-4717	[2]	NUT
3B-4506	[2]	LOCKWASHER
5M-8767	[1]	TUBE ASSEM.
2M-8899	[1]	CLAMP
		(PART OF TUBE ASSEM. 5M8767)
8M-4987	[1]	SEAL
5M-3466	[1]	HOSE ASSEM.
8M-4987	[2]	SEAL
0S-1591	[2]	BOLT
1D-4717	[2]	NUT
3B-4506	[2]	LOCKWASHER
1M-8592	[1]	SCREEN ASSEM.
1M-8591	[1]	BAFFLE ASSEM.
5B-1229	[2]	ROD
2F-8616	[2]	NUT
8H-0504	[2]	SPACER
0S-1591	[6]	BOLT
3B-4506	[6]	LOCKWASHER
9H-3418	[1]	HOUSING
8M-5250	[1]	SEAL
8M-4445	[1]	SEAL
5M-6701 Y	[1]	PUMP GROUP
		(SEE SEPARATE ILLUSTRATION)
5M-8760	[2]	CLIP
0S-1594	[1]	BOLT
3B-4506	[1]	LOCKWASHER
4B-4278	[1]	WASHER
4M-3995	[1]	HOSE
4H-0551	[2]	CLAMP
5M-8762	[1]	TUBE ASSEM.
8M-5010	[1]	SEAL
0S-1594	[2]	BOLT
3B-4506	[2]	LOCKWASHER
2M-5974	[1]	COVER ASSEM.
3H-6660	[1]	PIN (SPRING)
		(PART OF COVER ASSEM. 2M5974)
1M-0335	[2]	GASKET
Y		SEPARATE ILLUSTRATION

#UE0332980241

TRANSMISSION AND STEERING CLUTCH OIL SYSTEM

TRANSMISSION AND STEERING CLUTCH OIL SYSTEM--Part 2 of 3
Effective with Serial No. 36A3740
5M5038 Valve Group and 9H722 Filter Group parts are shown on Pages 80 and 86
ADDITIONAL PARTS ARE SHOWN ON PAGES 78N AND 79

c83979 UE033298

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1A-2029	[3]	BOLT
3B-4506	[3]	LOCKWASHER
0T-0573	[1]	BOLT
3B-4506	[1]	LOCKWASHER
7M-0378	[1]	PLUNGER ASSEM.
5M-5038 Y	[1]	VALVE GROUP
		(SEE SEPARATE ILLUSTRATION)
8M-4443	[1]	SEAL (1.744" I.D.)
8M-4437	[1]	SEAL (.549" I.D.)
8M-5248	[1]	SEAL (1.115" I.D.)
8H-7702	[1]	GUIDE ASSEM.
9F-5940	[1]	GASKET
0S-1588	[3]	BOLT
3B-4506	[1]	LOCKWASHER
4B-4278	[1]	WASHER
0S-1594	[1]	BOLT
3B-4506	[6]	LOCKWASHER
0L-1352	[1]	BOLT
0S-1590	[2]	BOLT
3B-8996	[2]	FITTING
8F-8997	[2]	NUT
		(1 IN EACH FITTING 3B8996)
4F-5640	[1]	GASKET
7H-7055	[2]	CLIP
0T-0102	[2]	BOLT
3B-4506	[2]	LOCKWASHER
1M-2676	[1]	TUBE (LEFT HAND)
1M-2675	[1]	TUBE (RIGHT HAND)
8M-6044	[1]	TUBE ASSEM.
		(TO PINION SPRAYER)
0T-0102	[1]	BOLT
3B-4506	[1]	LOCKWASHER
5H-2095	[2]	CLAMP
0S-1591	[1]	BOLT
3B-4506	[2]	LOCKWASHER
1D-4717	[1]	NUT
9H-0722 Y	[1]	FILTER GROUP
		(SEE SEPARATE ILLUSTRATION)
3B-1915	[4]	BOLT
3B-4506	[4]	LOCKWASHER
9H-0899	[1]	SUPPORT ASSEM.
9F-2978	[4]	NUT (WELD)
		(PART OF SUPPORT ASSEM. 9H899)
9H-0913	[2]	CLIP
0S-1594	[1]	BOLT
3B-4506	[1]	LOCKWASHER
1H-3305	[2]	FLANGE
0S-1571	[4]	BOLT
1D-4717	[4]	NUT
3B-4506	[4]	LOCKWASHER
9H-0904	[1]	HOSE ASSEM.
8M-4987	[2]	SEAL
0S-1588	[2]	BOLT
3B-4506	[2]	LOCKWASHER
1F-0748	[3]	NUT (WELD)
		(PART OF SUPPORT ASSEM. 9H899)
7B-3235	[3]	BOLT
3B-4508	[3]	LOCKWASHER
0S-1588	[2]	BOLT
3B-4506	[2]	LOCKWASHER
5M-9970	[1]	HOSE ASSEM.
8M-4987	[2]	SEAL
Y		SEPARATE ILLUSTRATION

#UE0332980242

TRANSMISSION AND STEERING CLUTCH OIL SYSTEM

TRANSMISSION AND STEERING CLUTCH OIL SYSTEM--Part 3 of 3
Effective with Serial No. 36A3740
ADDITIONAL PARTS ARE SHOWN ON PAGES 78N AND 78P

c83980 UE033298

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
9H-0973	[1]	CLIP
5M-3465	[1]	CLAMP ASSEM.
7B-9387	[2]	GROMMET
0L-2070	[1]	BOLT
4M-8311	[1]	LOCK
0S-1591	[2]	BOLT
1D-4717	[2]	NUT
3B-4506	[2]	LOCKWASHER
5M-3468	[1]	HOSE ASSEM.
8M-4987	[2]	SEAL
0T-0065	[2]	BOLT
3B-4506	[2]	LOCKWASHER
9H-6844	[1]	TUBE ASSEM.
8M-4445	[1]	SEAL
0S-1594	[2]	BOLT
3B-4506	[2]	LOCKWASHER
9H-3331	[2]	GASKET
0S-1591	[4]	BOLT
3B-4506	[4]	LOCKWASHER
1A-2029	[2]	BOLT
3B-4506	[2]	LOCKWASHER
9H-0961	[1]	TUBE ASSEM.
8M-4988	[1]	SEAL
9H-0967	[1]	HOSE
7H-1442	[2]	CLAMP
0S-1594	[2]	BOLT
3B-4506	[2]	LOCKWASHER
9H-0963	[1]	TUBE ASSEM.
9H-4214	[1]	GASKET
5M-3454	[1]	TUBE ASSEM.
8M-4986	[1]	SEAL
0S-1594	[1]	BOLT
3B-4506	[1]	LOCKWASHER
1A-2029	[2]	BOLT
3B-4506	[2]	LOCKWASHER
1A-2029	[2]	BOLT
3B-4506	[2]	LOCKWASHER
5M-3458	[1]	TUBE ASSEM.
8M-4986	[1]	SEAL
0S-1588	[2]	BOLT
3B-4506	[2]	LOCKWASHER
5M-8683	[1]	TUBE ASSEM.
8M-4987	[1]	SEAL
5M-8718	[1]	TUBE ASSEM.
8M-5010	[1]	SEAL
0S-1594	[2]	BOLT
3B-4506	[2]	LOCKWASHER

#UE0332980243

5M-6701: OIL PUMP GROUP

OIL PUMP GROUP

5M6701 OIL PUMP GROUP
Part of Transmission and Steering Clutch Oil System shown on Pages 78J and 78N

c77475 UE033298

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
4M-0501	[1]	BODY ASSEM.
1M-3735	[4]	DOWEL
		(PART OF BODY ASSEM. 4M501)
1A-2029	[2]	BOLT
3B-4506	[2]	LOCKWASHER
0S-1619	[1]	BOLT
3B-4506	[1]	LOCKWASHER
8M-5252	[1]	SEAL
4M-0504	[1]	GEAR
		(12 TEETH DRIVE)
1M-8049	[1]	SEAL
5M-3320	[2]	BEARING
		(PART OF MANIFOLD ASSEM. 2M3437)
2M-3437	[1]	MANIFOLD ASSEM.
5M-6214	[1]	PLUG (PIPE)
2M-3436	[1]	COVER ASSEM.
5M-3320	[2]	BEARING
		(PART OF COVER ASSEM. 2M3436)
4M-0503	[1]	GEAR
		(12 TEETH - IDLER)
8M-5007	[2]	SEAL
0T-0055	[1]	BOLT
3B-4506	[1]	LOCKWASHER
0S-1608	[4]	BOLT
3S-0004	[4]	WASHER

#UE0332980244

5M-5038: FLOW CONTROL AND RELIEF VALVE GROUP

FLOW CONTROL AND RELIEF VALVE GROUP

5M5038 FLOW CONTROL AND RELIEF VALVE GROUP
Part of Transmission and Steering Clutch Oil System shown on Pages 78K and 78P

c66672 UE033298

5M5038 FLOW CONTROL AND RELIEF VALVE GROUP Parts scheme

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
5M-4588	[1]	HOUSING
1A-7353	[1]	SPRING
8H-1037	[1]	RING
7M-6568	[1]	VALVE
4M-6012	[1]	SPRING (OUTER)
8H-9457	[1]	SPRING (INNER)
5M-8646	[1]	VALVE
8H-0333	[1]	PISTON
5M-4644	[1]	GASKET
5M-4645	[1]	COVER
0S-1594	[2]	BOLT
3B-4506	[2]	LOCKWASHER

#UE0332980245

2M-8765: RELIEF VALVE GROUP

RELIEF VALVE GROUP

2M8765 RELIEF VALVE GROUP
Part of Transmission and Steering Clutch Oil System shown on Page 80

c57219 UE033298

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
9H-4131	[1]	CAP
9F-6092	[1]	SPRING
5B-3265	[1]	GASKET
2H-1817	[1]	SEAT
5F-7054	[1]	SEAL
9F-6306	[1]	PLUNGER
2M-7022	[1]	HOUSING

#UE0332980246

9H-0931: OIL PUMP GROUP

OIL PUMP GROUP

9H931 OIL PUMP GROUP
Part of Transmission and Steering Clutch Oil System shown on Pages 78, 78C and 78F

c111606 UE033298

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1S-6457	[1]	BODY ASSEM.
8M-8489	[4]	DOWEL
		(PART OF ASSEM. 1S6457)
1M-8049	[1]	SEAL
9H-5775	[1]	GEAR (12T.-DRIVE)
9S-1343	[1]	PLUG
		(PART OF ASSEM.9H915)
2M-3869	[2]	BEARING
		(PART OF ASSEM.9H915)
9H-5761	[1]	GEAR (12T.-IDLER)
9H-0915	[1]	COVER ASSEM.
9H-0909	[1]	HOUSING ASSEM.
1M-3736	[2]	DOWEL
		(PART OF ASSEM.9H909)
9H-5760	[1]	GEAR (12T.IDLER)
1A-5183	[4]	BOLT
0T-0350	[4]	WASHER
1B-8705	[1]	KEY
9H-5759	[1]	GEAR (12T.-IDLER)
2S-1454	[1]	COVER ASSEM.
9S-4191	[1]	PLUG
3J-1907	[1]	SEAL
9H-0911	[2]	BEARING
		(PART OF ASSEM.9H916)
1M-3780	[2]	BEARING
		(PART OF ASSEM.2S1454)
9H-0916	[1]	MANIFOLD ASSEM.
2B-7408	[2]	PLUG
8F-9516	[4]	SEAL
5B-2638	[2]	BOLT
3B-4506	[2]	LOCKWASHER

#UE0332980247

STEERING CLUTCH HYDRAULIC CONTROL

STEERING CLUTCH HYDRAULIC CONTROL--Side View--Part 1 of 2

c91312 UE033298

None STEERING CLUTCH HYDRAULIC CONTROL Parts scheme

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
0L-0829	[2]	HANDLE
9H-2941	[2]	ROD
1D-5118	[2]	NUT
1M-0559	[2]	BAR ASSEM.
4B-3673	[4]	BEARING
		(2 IN EACH ASSEM. 1M559)
1M-0595	[2]	LEVER ASSEM.
3B-8686	[2]	FITTING
3B-6175	[2]	BUMPER
5H-6406	[8]	SEAL
8M-4987	[2]	SEAL
8H-0438	[2]	ADAPTER
8M-5253	[1]	SEAL
8H-0439	[2]	GASKET
8M-4987	[1]	SEAL
8H-0330	[1]	STAND PIPE
8H-0437	[2]	PIPE
8M-4445	[4]	SEAL
1M-0644	[2]	BOLT
3B-8489	[2]	FITTING
1B-2578	[2]	NUT
1M-0594	[2]	LEVER ASSEM.
7F-7983	[8]	BEARING
		(2 IN EACH ASSEM. 1M594 & 1M595)
1J-4384	[4]	PIN
3B-4615	[4]	COTTER PIN
1M-1341	[4]	END
		(2 IN EACH ASSEM. 1M588)
1M-0588	[2]	ROD ASSEM.
5H-6406	[4]	SEAL
9H-3428	[1]	SHAFT
4H-3119	[1]	PIN (SPRING)
9H-1781	[1]	BELLCRANK ASSEM.
		(RIGHT HAND)
9H-4196	[1]	BELLCRANK ASSEM.
		(LEFT HAND)
7F-7983	[4]	BEARING
		(2 IN EACH ASSEM. 9H1781 & 9H4196)
3B-8489	[2]	FITTING

#UE0332980248

STEERING CLUTCH HYDRAULIC CONTROL

STEERING CLUTCH HYDRAULIC CONTROL--Top View--Part 2 of 2
9H5376 and 7M3211 Steering Clutch Hydraulic Valve Group parts are shown on Page 84
and on insert between Pages 84 & 85

c66629 UE033298

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
9H-8490	[2]	LEVER
1B-8710	[2]	KEY
0L-0478	[2]	BOLT
1B-4203	[2]	NUT
1M-1341	[2]	END
		(1 IN EACH ASSEM. 1M557 & 1M558)
0S-1619	[4]	BOLT
3B-4506	[4]	LOCKWASHER
2B-7408	[2]	PLUG
0S-1571	[4]	BOLT
3B-4506	[4]	LOCKWASHER
1M-0558	[1]	ROD ASSEM. (L.H.)
1M-0557	[1]	ROD ASSEM. (R.H.)
9H-3273	[1]	SPACER
9H-2981	[1]	SHAFT
5B-9079	[2]	NUT
		(1 IN EACH ASSEM. 1M557 & 1M558)
1M-1291	[4]	PIN
3B-4619	[4]	COTTER PIN
1B-4203	[2]	NUT
1A-9252	[2]	END
1J-4384	[4]	PIN
3B-4615	[4]	COTTER PIN
1J-5799	[2]	PIN (SPRING)
9H-5376	[1]	VALVE GROUP
		-OR-
7M-3211 Y	[1]	VALVE
		(SEE SEPARATE ILLUS. FOR PARTS)
9H-3531	[1]	SHAFT
8M-4988	[2]	SEAL
1A-2029	[4]	BOLT
3B-4506	[4]	LOCKWASHER
8H-0448	[2]	ELBOW
3H-5077	[8]	SEAL
Y		SEPARATE ILLUSTRATION

#UE0332980249

9H-5376: STEERING CLUTCH HYDRAULIC VALVE GROUP

STEERING CLUTCH HYDRAULIC VALVE GROUP

9H5376 STEERING CLUTCH HYDRAULIC VALVE GROUP--Top View
Part of Steering Clutch Hydraulic Control shown on Page 83

c82233 UE033298

9H5376 STEERING CLUTCH HYDRAULIC VALVE GROUP Parts scheme

For full view, you need register

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
8H-0384	[1]	PLUNGER (LEFT HAND)
0S-1588	[1]	BOLT
3B-4506	[1]	LOCKWASHER
8H-0335	[1]	PLATE
8H-0383	[1]	PLUNGER (RIGHT HAND)
2M-8901	[2]	BUSHING
8H-1037	[2]	RING
9M-1314	[2]	SPRING
8H-0387	[2]	VALVE
9H-5291	[1]	HOUSING
8H-0263	[2]	PLUG
5H-3249	[2]	RING
8M-5254	[2]	SEAL
8H-0333	[2]	PISTON
1M-0313	[2]	SPRING
9H-7664	[1]	SHAFT
4H-8381	[1]	SPACER
9H-7663	[1]	SHAFT
8H-0445	[2]	SEAL
1K-2761	[2]	WASHER
9H-0431	[2]	TUBE
4H-7973	[2]	LEVER
1B-8710	[2]	KEY
8H-0458	[1]	GASKET
6H-3956	[2]	PIN (SPRING)
0S-1571	[2]	BOLT
8H-0270	[1]	COVER
8H-0463	[1]	TUBE
4H-8158	[2]	RING
6B-7687	[2]	ROLLER
0S-0175	[2]	PIN
3B-4617	[2]	COTTER PIN
0L-1351	[8]	BOLT
3B-4506	[8]	LOCKWASHER
4B-3671	[4]	BEARING
5H-4279	[2]	PLUG

Information:

POWER TRAIN

TRANSMISSION GP

Special Instruction

Installation Of Additional Studs To Hold Transmission In Position{3150, 3159, 4059}
Installation Of Additional Studs To Hold Transmission In Position{3150, 3159, 4059}

Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}

Tool Operating Manual

396-6461 Tube Assembly{0374, 0599, 0632, 3030, 3258}
396-6461 Tube Assembly{0374, 0599, 0632, 3030, 3258}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Reuse And Salvage Guidelines

Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}

Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}

Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}

Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}

Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material {3030, 3155, 3190}

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}

Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}

Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}

Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}

Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}

Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}

Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}

Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}

Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}

Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}

Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}

Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}

Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Bench Test Procedures

Service Magazine

Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25

A Special Shift Collar Is Available For Use On The Transmission Pinion Shaft{3070,3061,3060}
1979/05/21

Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27

Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog D8H :

TRANSMISSION AND STEERING CLUTCH OIL SYSTEM

5M-6701 OIL PUMP GROUP

5M-5038 FLOW CONTROL AND RELIEF VALVE GROUP

2M-8765 RELIEF VALVE GROUP

9H-0931 OIL PUMP GROUP

STEERING CLUTCH HYDRAULIC CONTROL

Truck sale:

22,300 USD

Caterpillar D8H, Construction
- Dozers
BLANCHARD MACHINERY CO.

26,000

Caterpillar D8H, Construction
- Dozers
H.O. PENN MACHINERY CO., INC.

CATERPILLAR D8H 1972
- TRACK TYPE TRACTORS
H O PENN MCHY
122 Noxon Road - Poughkeepsie - New Yo

CAT D8H

Don Smock Auction Co.
Pendleton, Indiana 46064

Call

CAT D8H

Walker Machinery