AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D320 ENGINE 63B00001-01801 BASIC ENGINE Caterpillar SIS



INDUSTRIAL ENGINE D320A INDUSTRIAL ENGINE 63B
 D320 ENGINE 63B00001-01801 UE034019 D320A 63B   (1962)

Parts group D320A:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
AIR COMPRESSOR MOUNTING GROUP
5L-1495 AIR COMPRESSOR MOUNTING GROUP
5L1495 AIR COMPRESSOR MOUNTING GROUP--TYPE 1
SERIAL NO. 63B215 AND 63B217-UP
AIR COMPRESSOR MOUNTING GROUP
5L-1495 AIR COMPRESSOR MOUNTING GROUP
5L1495 AIR COMPRESSOR MOUNTING GROUP--TYPE 2
SERIAL NO. 63B215 AND 63B217-UP
BALANCER GP
ENGINE BALANCER
8H-2848 ENGINE BALANCER
ENGINE BALANCER (8H2848 N/S)
BELT TIGHTENER GP
BELT TIGHTENER
BELT TIGHTENER
BELT TIGHTENER
Serial No. 63B1 to 63B214 and 63B216 inclusive
CAMSHAFT GP
CAMSHAFT
CAMSHAFT
CAMSHAFT
Serial No. 63B1 to 63B214 and 63B216 inclusive
CAMSHAFT
CAMSHAFT
CAMSHAFT
Serial No. 63B215 and 63B217-Up
CLUTCH GP
FLYWHEEL CLUTCH GROUP
5L-1115 FLYWHEEL CLUTCH GROUP
5L1115 FLYWHEEL CLUTCH GROUP--Type 1
FLYWHEEL CLUTCH ASSEMBLY
5L-1114 FLYWHEEL CLUTCH ASSEMBLY
5L1114 FLYWHEEL CLUTCH ASSEMBLY
Specification No. 27379 to 33584 inclusive
Part of 5L1115 Flywheel Clutch Group
FLYWHEEL CLUTCH GROUP
5L-1115 FLYWHEEL CLUTCH GROUP
5L1115 FLYWHEEL CLUTCH GROUP--Type 2
2N7074 Clutch parts are shown on Page 169B
FLYWHEEL CLUTCH ASSEMBLY
2N-7074 FLYWHEEL CLUTCH ASSEMBLY
2N7074 FLYWHEEL CLUTCH ASSEMBLY--Type 1
Specification No. 33585
Part of 5L1115 Flywheel Clutch Group shown on Page 169A
FLYWHEEL CLUTCH ASSEMBLY
2N-7074 FLYWHEEL CLUTCH ASSEMBLY
2N7074 FLYWHEEL CLUTCH ASSEMBLY--Type 2
Specification No. 33585
Part of 5L1115 Flywheel Clutch Group shown on Page 169A
PLANETARY REDUCTION GEAR GROUP
5L-3720 PLANETARY REDUCTION GEAR GROUP
5L3720 PLANETARY REDUCTION GEAR GROUP--1.56:1 Ratio--Type 1
Serial No. 63B215 and 63B217-Up. 5L4259 Planetary Gear Assembly parts are shown on Page 170C
Note: 4L8547 Flywheel Housing is required to adapt this Group to D320 Engines Serial No. 63B1 to 63B214 and 63B216 inclusive
Only separate parts serviced. When complete Group is required order 5L8617 shown on Page 170B
PLANETARY REDUCTION GEAR GROUP
5L-3720 PLANETARY REDUCTION GEAR GROUP
5L3720 PLANETARY REDUCTION GEAR GROUP--1.56:1 Ratio--Type 2
Serial No. 63B215 and 63B217-Up. 5L6786 Planetary Gear Assembly parts are shown on Page 170D
Note: 4L8547 Flywheel Housing is required to adapt this Group to D320 Engines Serial No. 63B1 to 63B214 and 63B216 inclusive
Only separate parts serviced. When complete Group is required order 5L8617 shown on Page 170B
PLANETARY REDUCTION GEAR GROUP
5L-8617 PLANETARY REDUCTION GEAR GROUP
5L8617 PLANETARY REDUCTION GEAR GROUP--1.56:1 Ratio
Serial No. 63B215 and 63B217-Up
5L8559 Planetary Reduction Gear Assembly parts are shown on Page 170E
Note: 4L8547 Flywheel Housing is required to adapt this Group to D320 Engines Serial No. 63B1 to 63B214 and 63B216 inclusive
PLANETARY GEAR ASSEMBLY
5L-4259 PLANETARY GEAR ASSEMBLY
5L4259 PLANETARY GEAR ASSEMBLY
Part of 5L3720 Planetary Reduction Gear Group shown on Page 170
Only separate parts serviced. When complete Assembly is required order 5L8559 shown on Page 170E
PLANETARY GEAR ASSEMBLY
5L-6786 PLANETARY GEAR ASSEMBLY
5L6786 PLANETARY GEAR ASSEMBLY
Part of 5L3720 Planetary Reduction Gear Group shown on Page 170A
Only separate parts serviced. When complete Assembly is required order 5L8559
PLANETARY REDUCTION GEAR GROUP
5L-9889 PLANETARY REDUCTION GEAR GROUP
5L9889 PLANETARY REDUCTION GEAR GROUP--1.56:1 Ratio--Type 1
Serial No. 63B215 and 63B217-Up
5L9878 Planetary Reduction Gear Assembly parts are shown on Page 170H
PLANETARY REDUCTION GEAR GROUP
5L-9889 PLANETARY REDUCTION GEAR GROUP
5L9889 PLANETARY REDUCTION GEAR GROUP--1.56:1 Ratio--Type 2
Serial No. 63B215 and 63B217-Up
5L9878 Planetary Reduction Gear Assembly parts are shown on Page 170H
OUTPUT SHAFT BRAKE ASSEMBLY
5L-8550 OUTPUT SHAFT BRAKE ASSEMBLY
5L8550 OUTPUT SHAFT BRAKE ASSEMBLY
Serial No. 63B215 and 63B217-Up
For use with 5L8617 Planetary Reduction Gear Group shown on Page 170B
Only separate parts serviced. When complete Assembly is required order 5L9890 shown on Page 170K
OUTPUT SHAFT BRAKE ASSEMBLY
5L-9890 OUTPUT SHAFT BRAKE ASSEMBLY
5L9890 OUTPUT SHAFT BRAKE ASSEMBLY
Serial No. 63B215 and 63B217-Up
For use with 5L9889 Planetary Reduction Gear Group shown on Pages 170F and 170G
COMPRESSOR GP-REFRIGERANT
AIR COMPRESSOR MOUNTING GROUP
5L-1495 AIR COMPRESSOR MOUNTING GROUP
5L1495 AIR COMPRESSOR MOUNTING GROUP--TYPE 1
SERIAL NO. 63B215 AND 63B217-UP
AIR COMPRESSOR MOUNTING GROUP
5L-1495 AIR COMPRESSOR MOUNTING GROUP
5L1495 AIR COMPRESSOR MOUNTING GROUP--TYPE 2
SERIAL NO. 63B215 AND 63B217-UP
COUPLING GP
COUPLING GP-GENERATOR DRIVE
4L-6553 COUPLING GP-GENERATOR DRIVE
4L6553 GENERATOR DRIVE COUPLING GROUP
Part of 4L7016 Generator Installation Arrangement
CRANKSHAFT GP
CRANKSHAFT
CRANKSHAFT
CRANKSHAFT
Serial No. 63B1 to 63B214 and 63B216 inclusive
CRANKSHAFT
CRANKSHAFT
CRANKSHAFT
Serial No. 63B215 and 63B217-Up
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENT GROUPS
CYLINDER BLOCK GP
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--Side View Part 1 of 2
Serial No. 63B1 to 63B214 and 63B216 inclusive
5M8525 Cylinder Block Assembly parts are shown on Page 32. Note: 5M1793 Piston and Liner Group, 7M404 Cylinder Liner and Piston Replacement Gasket
Kit and 7M401 Valve Grinding Gasket Kit are available. Piston and Liner replacement require the use of 7M404 and 7M401 Gasket Kits
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--End View Part 2 of 2
Serial No. 63B1 to 63B214 and 63B216 inclusive
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--Side View--Field Installation Part 1 of 2
Serial No. 63B1 to 63B214 and 63B216 inclusive. 5M8525 Cylinder Block parts are shown on Page 32. Note: 3S4025
Piston and Liner Group, 7M404 Cylinder Liner and Piston Replacement Gasket Kit and 7M401 Valve Grinding Gasket Kit
are available. Piston and Liner Replacement require the use of 7M404 and 7M401 Gasket Kits
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--End View--Field Installation Part 2 of 2
Serial No. 63B1 to 63B214 and 63B216 inclusive
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--Side View Part 1 of 2
Serial No. 63B215 and 63B217 to 63B301 inclusive. 5M2801 Cylinder Block parts are shown on Page 33. Note: 3S4025
Piston and Liner Group, 7M404 Cylinder Liner and Piston Replacement Gasket Kit and 7M401 Valve Grinding Gasket
Kit are available. Piston and Liner Replacement require the use of 7M404 and 7M401 Gasket Kits
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--End View--Part 2 of 2
Serial No. 63B215 and 63B217 to 63B301 inclusive
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--Side View--Part 1 of 2
Serial No. 63B302 to 63B418 inclusive. 5M2801 Cylinder Block parts are shown on Page 33. Note: 3S4025 Piston and Liner
Group, 7M404 Cylinder Liner and Piston Replacement Gasket Kit and 7M401 Valve Grinding Gasket Kit are available
Piston and Liner Replacement required the use of 7M404 and 7M401 Gasket Kits
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--End View--Part 2 of 2
Serial No. 63B302 to 63B418 inclusive
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--Side View--Part 1 of 2
Serial No. 63B419 to 63B766 inclusive. 5M2801 Cylinder Block parts are shown on Page 33. Note: 3S4025 Piston and Liner
Group, 7M404 Cylinder Liner and Piston Replacement Gasket Kit and 7M401 Valve Grinding Gasket Kit are available
Piston and Liner Replacement require the use of 7M404 and 7M401 Gasket Kits
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--End View Part 2 of 2
Serial No. 63B419 to 63B766 inclusive
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--SIDE VIEW Part 1 of 2
EFFECTIVE WITH SERIAL NO. 63B767
5M2801 CYLINDER BLOCK ASSEMBLY PARTS ARE SHOWN ON PAGES 32A AND 33
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS--END VIEW Part 2 of 2
EFFECTIVE WITH SERIAL NO. 63B767
SEE PAGE 36B FOR GASKET KITS
CYLINDER BLOCK ASSEMBLY
5M-8525 CYLINDER BLOCK ASSEMBLY
5M8525 CYLINDER BLOCK ASSEMBLY
Part of Cylinder Block and Covers shown on Pages 28 and 28B
CYLINDER BLOCK ASSEMBLY
5M-2801 CYLINDER BLOCK ASSEMBLY
5M2801 CYLINDER BLOCK ASSEMBLY
Effective with Serial No. 63B1429
Part of Cylinder Block and Covers shown on Pages 30F and 30H
CYLINDER BLOCK ASSEMBLY
5M-2801 CYLINDER BLOCK ASSEMBLY
5M2801 CYLINDER BLOCK ASSEMBLY
Serial No. 63B1 to 63B1428 inclusive
Part of Cylinder Block and Covers shown on Pages 30, 30B, 30D and 30F
CYLINDER HEAD GP
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--Side View Part 1 of 2
Serial No. 63B1 to 63B214 and 63B216 inclusive
Note: 7M401 Valve Grinding Gasket Kit is available
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--End View Part 2 of 2
Serial No. 63B1 to 63B214 and 63B216 inclusive
Refer also to Pages 98B and 98C for special parts
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--Side View--Field Installation Part 1 of 2
Serial No. 63B1 to 63B214 and 63B216 inclusive
Note: 7M401 Valve Grinding Gasket Kit is available
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--End View--Field Installation Part 2 of 2
Serial No. 63B1 to 63B214 and 63B216 inclusive
Refer also to Page 98 for special parts
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--Side View Part 1 of 2
Serial No. 63B215 and 63B217 to 63B375 inclusive
Refer also to Page 98 for special parts
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--End View Part 2 of 2
Serial No. 63B215 and 63B217 to 63B375 inclusive
Note: 7M401 Valve Grinding Gasket Kit is available
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--Side View Part 1 of 2
Serial No. 63B376 to 63B413 inclusive
Refer also to Page 98 for special parts
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--End View Part 2 of 2
Serial No. 63B376 to 63B413 inclusive
Note: 7M401 Valve Grinding Gasket Kit is available
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--Side View Part 1 of 2
Serial No. 63B414 to 63B481 inclusive
Refer also to Page 98 for special parts
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--End View Part 2 of 2
Serial No. 63B414 to 63B481 inclusive
Note: 7M401 Valve Grinding Gasket Kit is available
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--Side View Part 1 of 2
Serial No. 63B482 to 63B1655 inclusive
Refer also to Page 98 for special parts
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--End View Part 2 of 2
Serial No. 63B482 to 63B1655 inclusive
Note: 7M401 Valve Grinding Gasket Kit is available
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--Side View Part 1 of 2
Effective with Serial No. 63B1656
Refer also to Page 98 for special parts
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--End View--Part 2 of 2
Effective with Serial No. 63B1656
Note: 7M401 Valve Grinding Gasket Kit is available
DRIVE GP-ACCESSORY
ACCESSORY DRIVE
ACCESSORY DRIVE
ACCESSORY DRIVE
Serial No. 63B1 to 63B554 inclusive
ACCESSORY DRIVE
ACCESSORY DRIVE
ACCESSORY DRIVE
Serial No. 63B555 to 63B1019 inclusive
ACCESSORY DRIVE
ACCESSORY DRIVE
ACCESSORY DRIVE
EFFECTIVE WITH SERIAL NO. 63B1020
DRIVE GP-AUXILIARY
AUXILIARY DRIVE GROUP
4L-1799 AUXILIARY DRIVE GROUP
4L1799 AUXILIARY DRIVE GROUP--1:1 Ratio--Type 2
Serial No. 63B215 and 63B217-Up
AUXILIARY DRIVE GROUP
4L-1799 AUXILIARY DRIVE GROUP
4L1799 AUXILIARY DRIVE GROUP--1:1 Ratio--Type 1
Serial No. 63B215 and 63B217-Up
FRONT AUXILIARY DRIVE GROUP
3L-4837 FRONT AUXILIARY DRIVE GROUP
3L4837 FRONT AUXILIARY DRIVE GROUP--CRANKSHAFT
SERIAL NO. 63B215 AND 63B217-UP
DRIVE GP-FAN
FAN DRIVE, GUARD AND IDLER GROUP
4L-8733 FAN DRIVE, GUARD AND IDLER GROUP
4L8733 FAN DRIVE, GUARD AND IDLER GROUP--Type 1
Serial No. 63B215 and 63B217-Up
FAN DRIVE, GUARD AND IDLER GROUP
4L-8733 FAN DRIVE, GUARD AND IDLER GROUP
4L8733 FAN DRIVE, GUARD AND IDLER GROUP--Type 2
Serial No. 63B215 and 63B217-Up
6L3147 Fan Drive parts are shown on Page 114B
FAN DRIVE GROUP
6L-3147 FAN DRIVE GROUP
6L3147 FAN DRIVE GROUP
Part of 4L8733 Fan Drive, Guard and Idler Group shown on Page 114A
FAN DRIVE GROUP
5L-4614 FAN DRIVE GROUP
5L4614 FAN DRIVE GROUP
Part of 4L8733 Fan Drive, Guard and Idler Group
DRIVE GP-PUMP
BILGE PUMP DRIVE GROUP
6L-5861 BILGE PUMP DRIVE GROUP
6L5861 BILGE PUMP DRIVE GROUP
Serial No. 63B215 and 63B217-Up
FOR USE WITH 6L5857 BILGE WATER PUMP GROUP
FLYWHEEL GP
FLYWHEEL
FLYWHEEL
FLYWHEEL
Serial No. 63B1 to 63B214 and 63B216 inclusive
Also part of Gasoline Starting Engine Arrangement listed on Page 57
FLYWHEEL
FLYWHEEL
FLYWHEEL
Serial No. 63B215 and 63B217 to 63B710 inclusive
FLYWHEEL
FLYWHEEL
FLYWHEEL
Effective with Serial No. 63B711
HOUSING GP-FLYWHEEL
FLYWHEEL HOUSING ADAPTER GROUP
4L-3149 FLYWHEEL HOUSING ADAPTER GROUP
4L3149 FLYWHEEL HOUSING ADAPTER GROUP
Serial No. 63B215 and 63B217-Up
Provides an Adapter to change S.A.E. No. 2 to S.A.E. No. 3 Flywheel Housing
MISCELLANEOUS INFORMATION
ADAPTER GROUP
5L-3990 ADAPTER GROUP
5L3990 ADAPTER GROUP
Serial No. 63B215 and 63B217-Up
For use with Hood and Dash
MOUNTING GP-ENGINE
ENGINE SUPPORT
ENGINE SUPPORT
ENGINE SUPPORT
Serial No. 63B1 to 63B214 and 63B216 inclusive
ENGINE SUPPORT
ENGINE SUPPORT
ENGINE SUPPORT
Serial No. 63B215 and 63B217-Up
PISTON & ROD GP
CONNECTING ROD AND PISTON
CONNECTING ROD AND PISTON
CONNECTING ROD AND PISTON--4 Required
Note: 5M1793 Piston and Liner Group, consisting of 1--Piston Assembly, 1--Liner and
2--Seal, is available
POWER TAKE-OFF GP
PLANETARY REDUCTION GEAR ASSEMBLY
5L-8559 PLANETARY REDUCTION GEAR ASSEMBLY
5L8559 PLANETARY REDUCTION GEAR ASSEMBLY
Part of 5L8617 Planetary Reduction Gear Group shown on Page 170B
PLANETARY REDUCTION GEAR ASSEMBLY
5L-9878 PLANETARY REDUCTION GEAR ASSEMBLY
5L9878 PLANETARY REDUCTION GEAR ASSEMBLY
Part of 5L9889 Planetary Reduction Gear Group shown on Pages 170F and 170G
SHAFT GP-STUB
STUB SHAFT GROUP
6L-2696 STUB SHAFT GROUP
6L2696 STUB SHAFT GROUP--Rear Mounted
VALVE MECHANISM GP
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--Side View Part 1 of 2
Serial No. 63B1 to 63B214 and 63B216 inclusive
Note: 7M401 Valve Grinding Gasket Kit is available
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--End View Part 2 of 2
Serial No. 63B1 to 63B214 and 63B216 inclusive
Refer also to Pages 98B and 98C for special parts
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--Side View--Field Installation Part 1 of 2
Serial No. 63B1 to 63B214 and 63B216 inclusive
Note: 7M401 Valve Grinding Gasket Kit is available
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--End View--Field Installation Part 2 of 2
Serial No. 63B1 to 63B214 and 63B216 inclusive
Refer also to Page 98 for special parts
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--Side View Part 1 of 2
Serial No. 63B215 and 63B217 to 63B375 inclusive
Refer also to Page 98 for special parts
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--End View Part 2 of 2
Serial No. 63B215 and 63B217 to 63B375 inclusive
Note: 7M401 Valve Grinding Gasket Kit is available
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--Side View Part 1 of 2
Serial No. 63B376 to 63B413 inclusive
Refer also to Page 98 for special parts
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--End View Part 2 of 2
Serial No. 63B376 to 63B413 inclusive
Note: 7M401 Valve Grinding Gasket Kit is available
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--Side View Part 1 of 2
Serial No. 63B414 to 63B481 inclusive
Refer also to Page 98 for special parts
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--End View Part 2 of 2
Serial No. 63B414 to 63B481 inclusive
Note: 7M401 Valve Grinding Gasket Kit is available
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--Side View Part 1 of 2
Serial No. 63B482 to 63B1655 inclusive
Refer also to Page 98 for special parts
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--End View Part 2 of 2
Serial No. 63B482 to 63B1655 inclusive
Note: 7M401 Valve Grinding Gasket Kit is available
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--Side View Part 1 of 2
Effective with Serial No. 63B1656
Refer also to Page 98 for special parts
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM
CYLINDER HEAD AND VALVE MECHANISM--End View--Part 2 of 2
Effective with Serial No. 63B1656
Note: 7M401 Valve Grinding Gasket Kit is available

Information:

(For parts list, see above)

Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Engine News
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Service Magazine
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Clutch (PTO) Warranty On Morbark Industries Products Powered By Caterpillar Engines{7758}
1992/07/20
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Crankshaft Failures
1983/11/30
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Magazine
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse And Salvage Guidelines
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Service Magazine
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Magazine
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine News
"Off-Size" Bearing Kits Available
1991/10/01
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Guidelines for Inspecting Pistons {1214}
2006/01/02
Special Instruction
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Magazine
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Clutch (PTO) Warranty On Morbark Industries Products Powered By Caterpillar Engines{7758}
1992/07/20
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Engine News
New 6V87 Gauge Measures Valve Stem Wear
1979/01/10
New Service Centers For 6V3100 Engine Timing Indicator Group
1983/10/26
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Service Magazine
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
A New Book &quot;Analyzing Diesel And Natural Gas Engine Valve Failures&quot; Is Available
1985/03/01
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.