AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5J701 PUSH ARM AND BRACE GROUP 8S Bulldozer Serial No. 29E5080 to 29E5816 inclusive and 8U Bulldozer Serial No. 30E1274 to 30E1411 inclusive. For D8 Tractors Serial No. 35A1-Up, 36A1-Up and 46A1-Up Note: Quantities shown are those required for both R.H. and L.H. sides 8A


IMPLEMENTS
PUSH ARM GP
WORK TOOLS
BLADE GP

BULLDOZER 8A BULLDOZER 28E
 NO. 8A, NO. 8C, NO.8S & NO. 8U BULLDOZERS 28E00001-04838 UE034469 8A 28E   (1976)

IMPLEMENTS

PUSH ARM GP
PUSH ARM AND BRACE GROUP
4J-2140 PUSH ARM AND BRACE GROUP
PUSH ARM AND BRACE GROUP
4J-2140 PUSH ARM AND BRACE GROUP
PUSH ARM AND BRACE GROUP
5J-0701 PUSH ARM AND BRACE GROUP
PUSH ARM AND BRACE GROUP
5J-0701 PUSH ARM AND BRACE GROUP
PUSH ARM AND BRACE GROUP
5J-3660 PUSH ARM AND BRACE GROUP
PUSH ARM AND BRACE GROUP
5J-3660 PUSH ARM AND BRACE GROUP
 

#UE0344690020
 

5J-0701: PUSH ARM AND BRACE GROUP

5J701 PUSH ARM AND BRACE GROUP
8S Bulldozer Serial No. 29E5080 to 29E5816 inclusive and 8U Bulldozer
Serial No. 30E1274 to 30E1411 inclusive. For D8 Tractors Serial No. 35A1-Up, 36A1-Up and 46A1-Up
Note: Quantities shown are those required for both R.H. and L.H. sides
c87932 UE034469
5J0701 PUSH ARM AND BRACE GROUP Parts scheme
  For full view, you need register

Parts for your 8A BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3B-8489 [2] FITTING  
  1J-9447 [2] BRACE ASSEM.  
  1J-6800 [2] NUT  
    (1 IN EACH BRACE ASSEM. 1J9447)
  1J-6750 [2] SCREW  
  1J-6775 [4] BOLT  
  6F-7522 [4] NUT  
  3B-4520 [4] LOCKWASHER  
  6F-7523 [2] CAP  
  1J-6740 [2] BEARING  
    (1 IN EACH ARM ASSEM. 5J689 AND 5J690)
  5F-7994 [2] PIN  
  3B-4627 [2] COTTER PIN  
  1J-6746 [2] PIN  
  1J-6739 [2] BRACKET  
    (1 IN EACH ARM ASSEM. 5J689 AND 5J690)
  3J-2065 [1] PLATE  
    (PART OF ARM ASSEM. 5J689)
  3J-2066 [1] PLATE  
    (PART OF ARM ASSEM. 5J690)
  5J-0689 [1] ARM ASSEM.  
    (RIGHT HAND)
  5J-0690 [1] ARM ASSEM.  
    (LEFT HAND)
  2J-6563 [2] BRACKET  
    (1 IN EACH ARM ASSEM. 5J689 AND 5J690)
  1J-6746 [2] PIN  
  4J-2136 [2] ARM ASSEM.  
  5F-7994 [2] PIN  
  3B-4627 [2] COTTER PIN  
  4J-0789 [2] BALL STUD  
  1J-6798 [2] KNOB  
  1J-7474 [2] HANDLE  
    (1 OF EACH IN EACH BRACE ASSEM. 1J9447)
  5J-0697 [2] CONNECTOR  
  5J-0698 [2] PIN  
  5J-0693 [2] RETAINER  
    (1 OF EACH IN EACH ARM ASSEM. 5J689 AND 5J690)
  4J-0887 [2] CAP  
  3J-3230 [2] BALLSTUD  
    (1 OF EACH IN EACH ARM ASSEM. 4J2136)
  1D-4642 [8] BOLT  
  3B-4516 [8] LOCKWASHER  
  4J-0884 [14] SHIM  
  4J-0887 [2] CAP  
    (PART OF BRACKET ASSEM. 4J9632)
  4J-9632 [1] BRACKET ASSEM.  
  0S-1589 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
  5J-0681 [2] BRACKET  
    (1/2 OF EACH IN EACH ARM ASSEM. 5J689 AND 5J690)
  3J-3414 [2] PIN (10" LONG)  
  5F-7994 [4] PIN (3.375" LONG)  
  3B-4627 [4] COTTER PIN  
  2J-2547 [2] CAP  
    (1 IN EACH BRACE ASSEM. 1J9447)
  1D-4628 [8] BOLT  
  3B-4514 [8] LOCKWASHER  
  5J-0698 [2] PIN  
  5J-0693 [2] RETAINER  
  0S-1589 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
 

#UE0344690021
 

5J-0701: PUSH ARM AND BRACE GROUP

5J701 PUSH ARM AND BRACE GROUP
8S Bulldozer Serial No. 29E5817 to 29E6161 inclusive and 8U Bulldozer
Serial No. 30E1412 to 30E1524 inclusive. For D8 Tractors Serial No. 35A1-Up, 36A1-Up and 46A1-Up
Note: Quantities shown are those required for both R.H. and L.H. sides
c91652 UE034469
5J0701 PUSH ARM AND BRACE GROUP Parts scheme
  For full view, you need register

Parts for your 8A BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3B-8489 [2] FITTING  
  1J-9447 [2] BRACE ASSEM.  
  1J-6800 [2] NUT  
    (1 IN EACH BRACE ASSEM. 1J9447)
  1J-6750 [2] SCREW  
  1J-6775 [4] BOLT  
  6F-7522 [4] NUT  
  3B-4520 [4] LOCKWASHER  
  6F-7523 [2] CAP  
  1J-6740 [2] BEARING  
    (1 IN EACH ARM ASSEM. 5J689 AND 5J690)
  5F-7994 [2] PIN  
  3B-4627 [2] COTTER PIN  
  1J-6746 [2] PIN  
  1J-6739 [2] BRACKET  
    (1 IN EACH ARM ASSEM. 5J689 AND 5J690)
  3J-2065 [1] PLATE  
    (PART OF ARM ASSEM. 5J689)
  3J-2066 [1] PLATE  
    (PART OF ARM ASSEM. 5J690)
  5J-0689 [1] ARM ASSEM.  
    (RIGHT HAND)
  5J-0690 [1] ARM ASSEM.  
    (LEFT HAND)
  2J-6563 [2] BRACKET  
    (1 IN EACH ARM ASSEM. 5J689 AND 5J690)
  1J-6746 [2] PIN  
  4J-2136 [2] ARM ASSEM.  
  5F-7994 [2] PIN  
  3B-4627 [2] COTTER PIN  
  4J-0789 [2] BALL STUD  
  1J-6798 [2] KNOB  
  1J-7474 [2] HANDLE  
    (1 OF EACH IN EACH BRACE ASSEM. 1J9447)
  5J-0697 [2] CONNECTOR  
  5J-0698 [2] PIN  
  5J-0693 [2] RETAINER  
    (1 OF EACH IN EACH ARM ASSEM. 5J689 AND 5J690)
  4J-0887 [2] CAP  
  3J-3230 [2] BALLSTUD  
    (1 OF EACH IN EACH ARM ASSEM. 4J2136)
  1D-4642 [8] BOLT  
  3B-4516 [8] LOCKWASHER  
  4J-0884 [14] SHIM  
  4J-0887 [2] CAP  
    (PART OF BRACKET ASSEM. 4J9632)
  4J-9632 [1] BRACKET ASSEM.  
  0S-1589 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
  5J-0681 [2] BRACKET  
    (1/2 OF EACH IN EACH ARM ASSEM. 5J689 AND 5J690)
  3J-3414 [2] PIN (10" LONG)  
  5F-7994 [4] PIN (3.375" LONG)  
  3B-4627 [4] COTTER PIN  
  2J-2547 [2] CAP  
    (1 IN EACH BRACE ASSEM. 1J9447)
  1D-4628 [8] BOLT  
  3B-4514 [8] LOCKWASHER  
  5J-0698 [2] PIN  
  5J-2981 [2] RETAINER  
  0S-1589 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
 

#UE0344690022
 

5J-3660: PUSH ARM AND BRACE GROUP

5J3660 PUSH ARM AND BRACE GROUP--Type 1
EFFECTIVE WITH NO. 8S BULLDOZER SERIAL NO. 29E6162-UP AND NO. 8U BULLDOZER SERIAL NO. 30E1525-UP
FOR D8 TRACTORS SERIAL NO. 35A1-UP, 36A1-UP AND 46A1-UP
NOTE: QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH R.H. AND L.H. SIDES
c97146 UE034469
5J3660 PUSH ARM AND BRACE GROUP Parts scheme
  For full view, you need register

Parts for your 8A BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3B-8489 [2] FITTING  
  1J-9447 [2] BRACE ASSEM.  
  1J-6800 [2] NUT  
    (1 IN EACH BRACE ASSEM. 1J9447)
  1J-6750 [2] SCREW  
  1J-6775 [4] BOLT  
  6F-7522 [4] NUT  
  3B-4520 [4] LOCKWASHER  
  6F-7523 [2] CAP  
  1J-6740 [2] BEARING  
    (1 IN EACH ARM GROUP 5J3663 AND 5J3664)
  5F-7994 [2] PIN  
  3B-4627 [2] COTTER PIN  
  1J-6746 [2] PIN  
  3J-2623 [2] BRACKET  
    (1 IN EACH ARM GROUP 5J3663 AND 5J3664)
  5J-3184 [2] PLATE  
    (1 IN EACH ARM GROUP 5J3663 AND 5J3664)
  5J-3663 [1] ARM GROUP  
    (RIGHT HAND)
  5J-3664 [1] ARM GROUP  
    (LEFT HAND)
  2J-6563 [2] BRACKET  
    (1 IN EACH ARM GROUP 5J3663 AND 5J3664)
  1J-6746 [2] PIN  
  4J-2136 [2] ARM ASSEM.  
  5F-7994 [2] PIN  
  3B-4627 [2] COTTER PIN  
  4J-0789 [2] BALL STUD  
  1J-6798 [2] KNOB  
  1J-7474 [2] HANDLE  
    (1 OF EACH IN EACH BRACE ASSEM. 1J9447)
  5J-0697 [2] CONNECTOR  
  5J-0698 [2] PIN  
  5J-0693 [2] RETAINER  
    (1 OF EACH IN EACH ARM GROUP 5J3663 AND 5J3664)
  4J-0887 [2] CAP  
  3J-3230 [2] BALLSTUD  
    (1 OF EACH IN EACH ARM ASSEM. 4J2136)
  1D-4642 [8] BOLT  
  3B-4516 [8] LOCKWASHER  
  4J-0884 [14] SHIM  
  4J-0887 [2] CAP  
    (PART OF BRACKET ASSEM. 4J9632)
  4J-9632 [1] BRACKET ASSEM.  
  0S-1589 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
  5J-0681 [2] BRACKET  
    (1/2 OF EACH IN EACH ARM GROUP 5J3663 AND 5J3664)
  3J-3414 [2] PIN (10" LONG)  
  5F-7994 [4] PIN (3.375" LONG)  
  3B-4627 [4] COTTER PIN  
  2J-2547 [2] CAP  
    (1 IN EACH BRACE ASSEM. 1J9447)
  1D-4628 [8] BOLT  
  3B-4514 [8] LOCKWASHER  
  5J-0698 [2] PIN  
  5J-2981 [2] RETAINER  
  0S-1589 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
 

#UE0344690023
 

5J-3660: PUSH ARM AND BRACE GROUP

5J3660 PUSH ARM AND BRACE GROUP--TYPE 2
EFFECTIVE WITH 8S BULLDOZER SERIAL NO. 29E6162-UP AND 8U BULLDOZER SERIAL NO. 30E1525-UP
FOR D8 TRACTORS SERIAL NO. 35A1-UP, 36A1-UP AND 46A1-UP
NOTE: QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH R.H. AND L.H. SIDES
c97147 UE034469
5J3660 PUSH ARM AND BRACE GROUP Parts scheme
  For full view, you need register

Parts for your 8A BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3B-8489 [2] FITTING  
  5J-2688 [2] BRACE ASSEM.  
  5J-2687 [2] NUT  
    (1 IN EACH BRACE ASSEM. 5J2688)
  1J-7611 [2] SCREW  
  1J-6775 [4] BOLT  
  6F-7522 [4] NUT  
  3B-4520 [4] LOCKWASHER  
  6F-7523 [2] CAP  
  1J-6740 [2] BEARING  
    (1 IN EACH ARM GROUP 5J3663 AND 5J3664)
  5F-7994 [2] PIN  
  3B-4627 [2] COTTER PIN  
  1J-6746 [2] PIN  
  3J-2623 [2] BRACKET  
    (1 IN EACH ARM GROUP 5J3663 AND 5J3664)
  5J-3184 [2] PLATE  
    (1 IN EACH ARM GROUP 5J3663 AND 5J3664)
  5J-3663 [1] ARM GROUP  
    (RIGHT HAND)
  5J-3664 [1] ARM GROUP  
    (LEFT HAND)
  2J-6563 [2] BRACKET  
    (1 IN EACH ARM GROUP 5J3663 AND 5J3664)
  1J-6746 [2] PIN  
  4J-2136 [2] ARM ASSEM.  
  5F-7994 [2] PIN  
  3B-4627 [2] COTTER PIN  
  3J-3230 [2] BALL STUD  
  1J-6798 [2] KNOB  
  1J-7474 [2] HANDLE  
    (1 OF EACH IN EACH BRACE ASSEM. 5J2688)
  5J-0697 [2] CONNECTOR  
  5J-0698 [2] PIN  
  5J-0693 [2] RETAINER  
    (1 OF EACH IN EACH ARM GROUP 5J3663 AND 5J3664)
  4J-0887 [2] CAP  
  3J-3230 [2] BALLSTUD  
    (1 OF EACH IN EACH ARM ASSEM. 4J2136)
  1D-4642 [8] BOLT  
  3B-4516 [8] LOCKWASHER  
  4J-0884 [14] SHIM  
  4J-0887 [2] CAP  
    (PART OF BRACKET ASSEM. 4J9632)
  4J-9632 [1] BRACKET ASSEM.  
  0S-1589 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
  5J-0681 [2] BRACKET  
    (1/2 OF EACH IN EACH ARM GROUP 5J3663 AND 5J3664)
  3J-3414 [2] PIN (10"LONG)  
  5F-7994 [4] PIN (3.375"LONG)  
  3B-4627 [4] COTTER PIN  
  2J-2547 [2] CAP  
    (1 IN EACH BRACE ASSEM. 5J2688)
  1D-4628 [8] BOLT  
  3B-4514 [8] LOCKWASHER  
  5J-0698 [2] PIN  
  5J-2981 [2] RETAINER  
  0S-1589 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
 

#UE0344690024
 

2J-2440: BLADE GROUP

2J2440 BLADE GROUP
No. 8U Bulldozer Serial No. 30E1 to 30E390 inclusive
c55236 UE034469
2J2440 BLADE GROUP Parts scheme
  For full view, you need register

Parts for your 8A BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2J-4754 [1] PLATE ASSEM.  
    (PART OF ASSEM. 2J137)
  2J-2442 H [1] PLATE  
  4B-4159 H [2] SCREW (DRIVE)  
  2J-2550 [2] BRACKET  
    (PART OF ASSEM. 2J137)
  4B-1254 [4] MACH. SCREW  
  1J-6907 [2] BRACKET  
    (PART OF ASSEM. 2J137)
  2J-1932 [2] SOCKET  
    (PART OF ASSEM. 2J137)
  2J-2570 [10] SHIM  
  1J-9402 [1] REINFORCEMENT  
    (CENTER)
    (PART OF ASSEM. 2J137)
  1J-9427 [1] CUTTING EDGE  
  1J-9419 [1] MOLDBOARD (CENTER)  
    (PART OF ASSEM. 2J137)
  1J-9401 [2] REINFORCEMENT  
    (OUTSIDE)
    (PART OF ASSEM. 2J137)
  6F-0196 [22] BOLT  
  1B-4332 [22] NUT  
  1J-9417 [1] MOLDBOARD (R.H.)  
  1J-9418 [1] MOLDBOARD (L.H.)  
    (PARTS OF ASSEM. 2J137)
  2J-0137 [1] BLADE ASSEM.  
  3B-8489 [2] FITTING  
  2J-2570 [10] SHIM  
  2B-7408 [2] PLUG  
  2J-1933 [2] SOCKET  
    (PART OF ASSEM. 2J137)
  4B-1254 [4] MACH. SCREW  
  1J-9463 [1] PLATE ASSEM. (R.H.)  
  1J-9464 [1] PLATE ASSEM. (L.H.)  
    (PARTS OF ASSEM. 2J137)
  1J-9403 [1] SHOE (R.H.)  
    (PART OF ASSEM. 1J9463)
  1J-9404 [1] SHOE (R.H.)  
    (PART OF ASSEM. 1J9464)
  1J-6903 [4] BRACKET  
    (PART OF ASSEM. 2J137)
  6F-0196 [14] BOLT  
  2J-3505 [14] NUT  
  2J-2571 [1] END BIT (R.H.)  
  2J-2572 [1] END BIT (L.H.)  
  1J-9428 [2] CUTTING EDGE  
  H   NOT PART OF THIS GROUP
 

#UE0344690025
 

3J-2107: BLADE GROUP

3J2107 BLADE GROUP
No. 8U Bulldozer Serial No. 30E391 to 30E537 inclusive
c69013 UE034469
3J2107 BLADE GROUP Parts scheme
  For full view, you need register

Parts for your 8A BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2J-4754 [1] PLATE ASSEM.  
    (PART OF BLADE ASSEM. 3J2110)
  2J-2550 [2] BRACKET  
    (PART OF BLADE ASSEM. 3J2110)
  4B-1254 [4] MACH. SCREW  
  2J-6013 [2] BRACKET  
  6F-8668 [1] LUG  
  2J-1932 [2] SOCKET  
    (PARTS OF BLADE ASSEM. 3J2110)
  2B-4602 [2] PLUG  
  2J-2570 [10] SHIM  
  1J-9402 [1] REINFORCEMENT  
    (CENTER)
    (PART OF BLADE ASSEM. 3J2110)
  1J-9427 [1] CUTTING EDGE  
  2J-8415 [1] MOLDBOARD (CENTER)  
    (PART OF BLADE ASSEM. 3J2110)
  1J-9401 [2] REINFORCEMENT  
    (OUTSIDE)
    (PART OF BLADE ASSEM. 3J2110)
  6F-0196 [22] BOLT  
  1B-4332 [22] NUT  
  2J-8411 [1] MOLDBOARD (R.H.)  
  2J-8412 [1] MOLDBOARD (L.H.)  
    (PARTS OF BLADE ASSEM. 3J2110)
  3J-2110 [1] BLADE ASSEM.  
  3B-8489 [2] FITTING  
  2J-2570 [10] SHIM  
  2B-7408 [2] PLUG  
  2J-1933 [2] SOCKET  
    (PART OF BLADE ASSEM. 3J2110)
  4B-1254 [4] MACH. SCREW  
  1J-9463 [1] PLATE ASSEM. (R.H.)  
  1J-9464 [1] PLATE ASSEM. (L.H.)  
  1J-7597 [2] RETAINER  
    (PARTS OF BLADE ASSEM. 3J2110)
  1J-9403 [1] SHOE (R.H.)  
    (PART OF PLATE ASSEM. 1J9463)
  1J-9404 [1] SHOE (L.H.)  
    (PART OF PLATE ASSEM. 1J9464)
  3J-3157 [1] BRACKET (R.H.)  
  3J-3158 [1] BRACKET (L.H.)  
  1J-6903 [2] BRACKET  
    (PARTS OF BLADE ASSEM. 3J2110)
  6F-0196 [14] BOLT  
  2J-3505 [14] NUT  
  2J-2571 [1] END BIT (R.H.)  
  2J-2572 [1] END BIT (L.H.)  
  1J-9428 [2] CUTTING EDGE  
 

#UE0344690026
 

3J-2107: BLADE GROUP

3J2107 BLADE GROUP
No. 8U Bulldozer Serial No. 30E538 to 30E828 inclusive
c69014 UE034469
3J2107 BLADE GROUP Parts scheme
  For full view, you need register

Parts for your 8A BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2J-4754 [1] PLATE ASSEM.  
    (PART OF BLADE ASSEM. 3J2110)
  3J-3184 [2] BRACKET  
    (PART OF BLADE ASSEM. 3J2110)
  4B-1254 [4] MACHINE SCREW  
  2J-6013 [2] BRACKET  
  6F-8668 [1] LUG  
  2J-1932 [2] SOCKET  
    (PARTS OF BLADE ASSEM. 3J2110)
  2B-4602 [2] PLUG  
  2J-2570 [10] SHIM  
  1J-9402 [1] REINFORCEMENT  
    (CENTER)
    (PART OF BLADE ASSEM. 3J2110)
  1J-9427 [1] CUTTING EDGE  
  2J-8415 [1] MOLDBOARD (CENTER)  
    (PART OF BLADE ASSEM. 3J2110)
  3J-2110 [1] BLADE ASSEM.  
  1J-9401 [2] REINFORCEMENT  
    (OUTSIDE)
    (PART OF BLADE ASSEM. 3J2110)
  6F-0196 [22] BOLT  
  1B-4332 [22] NUT  
  2J-8411 [1] MOLDBOARD  
    (RIGHT HAND)
  2J-8412 [1] MOLDBOARD  
    (LEFT HAND)
  3B-8489 [2] FITTING  
  2J-2570 [10] SHIM  
  2B-7408 [2] PLUG  
  3J-2960 [2] SOCKET  
    (PART OF BLADE ASSEM. 3J2110)
  4B-1254 [4] MACH. SCREW  
  1J-9463 [1] PLATE ASSEM.  
    (RIGHT HAND)
  1J-9464 [1] PLATE ASSEM.  
    (LEFT HAND)
  1J-7597 [2] RETAINER  
    (PARTS OF BLADE ASSEM. 3J2110)
  1J-9403 [1] SHOE (RIGHT HAND)  
    (PART OF PLATE ASSEM. 1J9463)
  1J-9404 [1] SHOE (LEFT HAND)  
    (PART OF PLATE ASSEM. 1J9464)
  3J-0014 [2] BRACKET  
    (PART OF BLADE ASSEM. 3J2110)
  6F-0196 [14] BOLT  
  2J-3505 [14] NUT  
  2J-2571 [1] END BIT (RIGHT HAND)  
  2J-2572 [1] END BIT (LEFT HAND)  
  1J-9428 [2] CUTTING EDGE  
 

#UE0344690027
 

4J-4249: BLADE GROUP

4J4249 BLADE GROUP--FIELD INSTALLATION
NO. 8U BULLDOZER SERIAL NO. 30E1 TO 30E390 INCLUSIVE
c77965 UE034469
4J4249 BLADE GROUP Parts scheme
  For full view, you need register

Parts for your 8A BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2J-4754 [1] PLATE ASSEM.  
  3J-3184 [2] BRACKET  
  2J-6013 [2] BRACKET ASSEM.  
  6F-8668 [1] LUG  
  3J-2799 [4] GUSSET  
  2J-1932 [2] SOCKET  
  2J-2570 [10] SHIM  
  4B-1254 [4] SCREW  
  4J-2118 [1] REINFORCEMENT  
    (CENTER)
  1J-9427 [1] CUTTING EDGE  
  4J-2122 [1] MOLDBOARD (CENTER)  
  4J-2119 [2] REINFORCEMENT  
    (OUTSIDE)
  6F-0196 [22] BOLT  
  1B-4332 [22] NUT  
  4J-2125 [1] MOLDBOARD  
    (RIGHT HAND)
  4J-2126 [1] MOLDBOARD  
    (LEFT HAND)
  3B-8489 [2] FITTING  
  2J-2570 [10] SHIM  
  2B-7408 [2] PLUG  
  3J-2960 [2] SOCKET  
  2B-4602 [2] PLUG  
  4B-1254 [4] SCREW  
  4J-2131 [1] PLATE ASSEM.  
    (RIGHT HAND)
  4J-2132 [1] PLATE ASSEM.  
    (LEFT HAND)
  1J-7597 [2] RETAINER  
  4J-2117 [4] BIT  
    (2 IN EACH PLATE ASSEM. 4J2131 AND 4J2132)
  3J-0014 [2] BRACKET  
  4J-2127 [1] SHOE  
    (RIGHT HAND)
  4J-2128 [1] SHOE  
    (LEFT HAND)
  4J-5497 [14] BOLT  
  2J-3505 [14] NUT  
  2J-2571 [1] END BIT (RIGHT HAND)  
  2J-2572 [1] END BIT (LEFT HAND)  
  1J-9428 [2] CUTTING EDGE  
 

#UE0344690028
 

4J-4194: BLADE GROUP

4J4194 BLADE GROUP--Field Installation
No. 8U Bulldozer Serial No. 30E391 to 30E828 inclusive
c86420 UE034469
4J4194 BLADE GROUP Parts scheme
  For full view, you need register

Parts for your 8A BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2J-4754 [1] PLATE ASSEM.  
  3J-3184 [2] BRACKET  
  2J-6013 [2] BRACKET ASSEM.  
  6F-8668 [1] LUG  
  2J-1932 [2] SOCKET  
  2J-2570 [10] SHIM  
  4B-1254 [4] SCREW  
  4J-2118 [1] REINFORCEMENT  
    (CENTER)
  1J-9427 [1] CUTTING EDGE  
  4J-2122 [1] MOLDBOARD (CENTER)  
  4J-2119 [2] REINFORCEMENT  
    (OUTSIDE)
  6F-0196 [22] BOLT  
  1B-4332 [22] NUT  
  4J-2125 [1] MOLDBOARD  
    (RIGHT HAND)
  4J-2126 [1] MOLDBOARD  
    (LEFT HAND)
  3B-8489 [2] FITTING  
  2J-2570 [10] SHIM  
  2B-7408 [2] PLUG  
  3J-2960 [2] SOCKET  
  2B-4602 [2] PLUG  
  4B-1254 [4] SCREW  
  4J-2131 [1] PLATE ASSEM.  
    (RIGHT HAND)
  4J-2132 [1] PLATE ASSEM.  
    (LEFT HAND)
  1J-7597 [2] RETAINER  
  4J-2117 [4] BIT  
    (2 IN EACH PLATE ASSEM. 4J2131 AND 4J2132)
  3J-0014 [2] BRACKET  
  4J-2127 [1] SHOE  
    (RIGHT HAND)
  4J-2128 [1] SHOE  
    (LEFT HAND)
  4J-5497 [14] BOLT  
  2J-3505 [14] NUT  
  2J-2571 [1] END BIT (RIGHT HAND)  
  2J-2572 [1] END BIT (LEFT HAND)  
  1J-9428 [2] CUTTING EDGE  
 

#UE0344690029
 

5J-5422: BLADE GROUP

5J5422 BLADE GROUP--FIELD INSTALLATION--REPLACES 4J4249
8U BULLDOZER SERIAL NO. 30E1 TO 30E390 INCLUSIVE
c95245 UE034469
5J5422 BLADE GROUP Parts scheme
  For full view, you need register

Parts for your 8A BULLDOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2J-4754 [1] PLATE ASSEM.  
  3J-3184 [2] BRACKET  
  2J-6013 [2] BRACKET ASSEM.  
  6F-8668 [1] LUG  
  3J-2799 [4] GUSSET  
  2J-1932 [2] SOCKET  
  2J-2570 [10] SHIM  
  4B-1254 [4] SCREW  
  4J-2118 [1] REINFORCEMENT  
    (CENTER)
  5J-6894 [1] CUTTING EDGE  
  5J-5411 [1] MOLDBOARD (CENTER)  
  4J-2119 [2] REINFORCEMENT  
    (OUTSIDE)
  5J-2409 [22] BOLT  
  2J-3505 [22] NUT  
  5J-5409 [1] MOLDBOARD  
    (RIGHT HAND)
  5J-5410 [1] MOLDBOARD  
    (LEFT HAND)
  3B-8489 [2] FITTING  
  2J-2570 [10] SHIM  
  2B-7408 [2] PLUG  
  3J-2960 [2] SOCKET  
  2B-4602 [2] PLUG  
  4B-1254 [4] SCREW  
  5J-5417 [1] PLATE ASSEM  
    (RIGHT HAND)
  5J-5418 [1] PLATE ASSEM  
    (LEFT HAND)
  1J-7597 [2] RETAINER  
  5J-5413 [2] BIT  
  5J-5414 [2] BIT  
    (1 OF EACH IN EACH PLATE ASSEM. 5J5417 AND 5J5418)
  3J-0014 [2] BRACKET  
  5J-5519 [1] SHOE  
    (RIGHT HAND)
  5J-5520 [1] SHOE  
    (LEFT HAND)
  5J-2409 [14] BOLT  
  2J-3505 [14] NUT  
  4J-8843 [1] END BIT (RIGHT HAND)  
  4J-8844 [1] END BIT (LEFT HAND)  
  5J-6832 [2] CUTTING EDGE  
 

Information:

Service Magazine
Blocks And Retainer Used In Push Arm And Brace Groups To Better Hold Linkage Pins{6061,6072,6073,6051,6053,6056}
1981/01/26

Caterpillar Parts SIS Catalog 8A :

PUSH ARM AND BRACE GROUP
4J-2140 PUSH ARM AND BRACE GROUP
PUSH ARM AND BRACE GROUP
4J-2140 PUSH ARM AND BRACE GROUP
PUSH ARM AND BRACE GROUP
4J-2140 PUSH ARM AND BRACE GROUP
PUSH ARM AND BRACE GROUP
3J-2099 PUSH ARM AND BRACE GROUP
PUSH ARM
PUSH ARM
PUSH ARM GROUP
4J-2257 PUSH ARM GROUP
PUSH ARM GROUP
4J-2257 PUSH ARM GROUP
PUSH ARM GROUP
3J-2641 PUSH ARM GROUP
PUSH ARM AND BRACE GROUP
5J-0701 PUSH ARM AND BRACE GROUP
PUSH ARM AND BRACE GROUP
5J-3660 PUSH ARM AND BRACE GROUP
PUSH ARM AND BRACE GROUP
5J-3660 PUSH ARM AND BRACE GROUP
BLADE GROUP
2J-2440 BLADE GROUP
BLADE GROUP
3J-2107 BLADE GROUP
BLADE GROUP
3J-2107 BLADE GROUP
BLADE GROUP
4J-4249 BLADE GROUP
BLADE GROUP
4J-4194 BLADE GROUP
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.