D8H TRACTOR / POWER SHIFT / 46A00001-03043 (MACHINE) LUBRICATION SYSTEM Caterpillar SIS




TRACK-TYPE TRACTOR D8H TRACK-TYPE TRACTOR 46A
 D8H TRACTOR / POWER SHIFT / 46A00001-03043 (MACHINE) UE034685 D8H 46A   (1959)

Parts group D8H:

  For full view, you need register
LUBRICATION SYSTEM
FILLER GP-ENGINE OIL
BREATHER AND OIL FILLER GROUP
5H-7030 BREATHER AND OIL FILLER GROUP
5H7030 BREATHER AND OIL FILLER GROUP
Serial No. 46A1 to 46A55 and 46A57 to 46A61 inclusive
BREATHER AND OIL FILLER
BREATHER AND OIL FILLER
BREATHER AND OIL FILLER
Serial No. 46A56 and 46A62-Up
COVER GP-PROTECTION
2S-3025 COVER GP-PROTECTION
2S3025 PROTECTION COVER GROUP--Oil Filler Cap
AN ATTACHMENT
FILTER GP-ENGINE OIL
OIL LINES AND FILTER
OIL LINES AND FILTER
OIL LINES AND FILTER--Side View--Part 1 of 2
Serial No. 46A1 to 46A2687 inclusive
Refer also to Pages 256 and 257 for special parts
OIL LINES AND FILTER
OIL LINES AND FILTER--End View--Part 2 of 2
Serial No. 46A1 to 46A2687 inclusive
8H4973 Oil Filter Assembly parts are shown on Page 83
Refer also to Pages 256 and 257 for special parts
OIL LINES AND FILTER
OIL LINES AND FILTER
OIL LINES AND FILTER--Side View--Part 1 of 3
Effective with Serial No. 46A2688
ADDITIONAL PARTS ARE SHOWN ON PAGES 81 AND 82
OIL LINES AND FILTER
OIL LINES AND FILTER--End View--Part 2 of 3
Effective with Serial No. 46A2688
ADDITIONAL PARTS ARE SHOWN ON PAGES 80 AND 82
OIL LINES AND FILTER
OIL LINES AND FILTER--End View--Part 3 of 3
Effective with Serial No. 46A2688
8H4973 Oil Filter Assembly parts are shown on Page 84
ADDITIONAL PARTS ARE SHOWN ON PAGES 80 AND 81
OIL FILTER ASSEMBLY
8H-4973 OIL FILTER ASSEMBLY
8H4973 OIL FILTER ASSEMBLY
Serial No. 46A1 to 46A446, 46A450, 46A451 and 46A457 inclusive
Part of Oil Lines and Filter shown on Page 79
OIL FILTER ASSEMBLY
8H-4973 OIL FILTER ASSEMBLY
8H4973 OIL FILTER ASSEMBLY
Serial No. 46A447 to 46A449, 46A452 to 46A456 and 46A458 to 46A2687 inclusive
Part of Oil Lines and Filter shown on Page 79
OIL FILTER ASSEMBLY
8H-4973 OIL FILTER ASSEMBLY
8H4973 OIL FILTER ASSEMBLY
Effective with Serial No. 46A2688
Part of Oil Lines and Filter shown on Page 82
LINES GP-ENGINE OIL
OIL LINES AND FILTER
OIL LINES AND FILTER
OIL LINES AND FILTER--Side View--Part 1 of 2
Serial No. 46A1 to 46A2687 inclusive
Refer also to Pages 256 and 257 for special parts
OIL LINES AND FILTER
OIL LINES AND FILTER--End View--Part 2 of 2
Serial No. 46A1 to 46A2687 inclusive
8H4973 Oil Filter Assembly parts are shown on Page 83
Refer also to Pages 256 and 257 for special parts
OIL LINES AND FILTER
OIL LINES AND FILTER
OIL LINES AND FILTER--Side View--Part 1 of 3
Effective with Serial No. 46A2688
ADDITIONAL PARTS ARE SHOWN ON PAGES 81 AND 82
OIL LINES AND FILTER
OIL LINES AND FILTER--End View--Part 2 of 3
Effective with Serial No. 46A2688
ADDITIONAL PARTS ARE SHOWN ON PAGES 80 AND 82
OIL LINES AND FILTER
OIL LINES AND FILTER--End View--Part 3 of 3
Effective with Serial No. 46A2688
8H4973 Oil Filter Assembly parts are shown on Page 84
ADDITIONAL PARTS ARE SHOWN ON PAGES 80 AND 81
LINES GP-TURBOCHARGER OIL
TURBOCHARGER OIL SYSTEM GROUP
7M-7628 TURBOCHARGER OIL SYSTEM GROUP
7M7628 TURBOCHARGER OIL SYSTEM GROUP--Field Installation--Type 1
Serial No. 46A1 to 46A2687 inclusive
TURBOCHARGER OIL SYSTEM GROUP
7M-7628 TURBOCHARGER OIL SYSTEM GROUP
7M7628 TURBOCHARGER OIL SYSTEM GROUP--Field Installation--Type 2
Serial No. 46A1 to 46A2687 inclusive
PUMP GP-ENGINE OIL
OIL PUMP ASSEMBLY
4H-8758 OIL PUMP ASSEMBLY
4H8758 OIL PUMP ASSEMBLY
OIL PUMP ASSEMBLY
2H-7664 OIL PUMP ASSEMBLY
2H7664 OIL PUMP ASSEMBLY
OIL PUMP ASSEMBLY
9H-8831 OIL PUMP ASSEMBLY
9H8831 OIL PUMP ASSEMBLY
Part of Transmission Lubrication System shown on Pages 160, 162, 164, 166 and 168
Only separate parts serviced. When complete Assembly is required order 8M4946
shown on Page 261
VANE OIL PUMP ASSEMBLY
8M-4946 VANE OIL PUMP ASSEMBLY
8M4946 VANE OIL PUMP ASSEMBLY

Information:

(For parts list, see above)

Tool Operating Manual
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Service Letter-NACD
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Letter-APD
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
Inspect All 2P4005 Oil Filter Assemblies In Parts Stock
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Service Magazine
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Oil Total Base Number (TBN) Test Kit Available{1300}
1986/01/20
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Special Instruction
Installation Of 4N3648 High Speed Oil Change Group And 5S479 Brush Guard Group{1325, 7158}
Installation Of 4N3648 High Speed Oil Change Group And 5S479 Brush Guard Group{1325, 7158}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Truck sale:

Caterpillar D8H, Construction
22,300 USD 
Caterpillar D8H, Construction
- Dozers
BLANCHARD MACHINERY CO.
Caterpillar D8H, Construction
26,000 
Caterpillar D8H, Construction
- Dozers
H.O. PENN MACHINERY CO., INC.
CATERPILLAR D8H 1972
 
CATERPILLAR D8H 1972
- TRACK TYPE TRACTORS
H O PENN MCHY
122 Noxon Road - Poughkeepsie - New Yo
 
 
CAT D8H

Don Smock Auction Co.
Pendleton, Indiana 46064
CAT D8H
Call 
CAT D8H

Walker Machinery