PLANETARY TRANSMISSION--Part 2 of 2 Serial No. 46A1872 to 46A1979 inclusive. Test No. 2077 to No. 2190 inclusive Also part of 4M3814 Transmission Arrangement listed on Page 258 D8H

PLANETARY TRANSMISSION

PLANETARY TRANSMISSION--Part 2 of 2
Serial No. 46A1872 to 46A1979 inclusive. Test No. 2077 to No. 2190 inclusive
Also part of 4M3814 Transmission Arrangement listed on Page 258

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
9H-5233	[4]	PISTON
3H-3451	[3]	LOCK
5M-1981	[3]	LOCK ASSEM.
1M-4155	[1]	GEAR (138 & 90T)
4M-3915	[42]	BEARING ASSEM.
8H-5784	[5]	RING
1M-4156	[1]	GEAR (138 & 89T)
5M-1164	[42]	WASHER (BRONZE)
1M-4177	[42]	WASHER (STEEL)
1M-4167	[3]	SHAFT
0T-0065	[3]	BOLT
5M-2894	[3]	WASHER
4M-8967	[1]	GEAR (39 & 39T)
1M-4153	[1]	CARRIER
0L-2070	[6]	BOLT
5M-2894	[6]	WASHER
1M-4179	[3]	PLATE
7M-1323	[6]	BOLT
5M-9062	[2FT]	WIRE
1M-4161	[3]	GEAR (21T-IDLER)
1M-4163	[3]	GEAR (29T.)
8M-1067	[15]	BOLT
2M-0849	[15]	WASHER
1M-4166	[3]	SHAFT
1B-8706	[15]	KEY
1M-4154	[1]	GEAR (138 & 87T)
9H-5353	[1]	HOUSING (CLUTCH 5)
1M-4096	[1]	HOUSING ASSEM. (CLUTCH 4)
0L-2061	[2]	DOWEL
		(PART OF ASSEM. 1m4096)
9H-5277	[1]	HOUSING ASSEM. (CLUTCH 3)
0L-2061	[4]	DOWEL
		(2 IN EACH ASSEM. 9H5277 & 1M4094)
7M-1249	[1]	PISTON
0S-0509	[6]	BOLT
6H-3465	[1]	RING (STANDARD)
1S-5560 HC	[1]	RING (.015" OVERSIZE)
6P-8262 HC	[1]	RING (.030" OVERSIZE)
9H-5239	[1]	GEAR (138 & 90 TEETH)
9H-9705	[15]	DISC ASSEM.
6H-2839	[10]	PLATE
8H-5783	[4]	RING (STANDARD)
1S-5561 HC	[4]	RING (.015" OVERSIZE)
6P-8263 HC	[4]	RING (.030" OVERSIZE)
9H-6530	[14]	BOLT
2M-0849	[14]	WASHER
9H-5197	[1]	GEAR. (138 & 90 TEETH)
1M-4157	[9]	GEAR (19 TEETH)
1M-4089	[1]	HOUSING (CLUTCH 1)
1M-4164	[3]	SHAFT
4M-7067	[1]	RING
1M-4097	[1]	RACE (OUTER)
1M-4095	[1]	BEARING ASSEM.
5M-0549	[1]	GEAR (27T)
1M-4093	[1]	RING
1M-4159	[6]	GEAR (28T)
1M-4158	[1]	GEAR (51T)
1M-4165	[6]	SHAFT
7M-1335	[1]	CARRIER ASSEM.
	[1]	CARRIER
	[1]	CARRIER
3F-3442	[3]	DOWEL
1M-4094	[1]	HOUSING ASSEM
		(CLUTCH 2)
9H-5298	[1]	PLATE ASSEM.
		(CENTER)
9H-5602	[2]	DOWEL
		(PART OF ASSEM 9H5298)
9H-5536	[12]	SPRING (LONG)
9H-5537	[36]	SPRING (SHORT)
9H-5546	[6]	PIN (LONG)
9H-5545	[18]	PIN (SHORT)
C		INDICATES CHANGE
H		NOT PART OF PLANETARY TRANSMIS

PLANETARY TRANSMISSION

PLANETARY TRANSMISSION--Part 1 of 2
Effective with Serial No. 46A1980-Up and Test No. 2191-Up
Part of 7M798 Transmission Group shown on Page 152. Note: This Transmission provides the following maximum speeds: (Forward) First--2.5.
Second--4.4 and Third--6.9 M.P.H.; (Reverse) First--2.9, Second--5.0 and Third--8.0 M.P.H. Only separate parts serviced. When complete Unit
is required order 7M798 shown on Page 152

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1M-6423	[2]	STUD
		(PART OF CASE ASSEM 1M6436)
1M-6455	[1]	GASKET
3F-7414	[2]	BUSHING
1F-0929	[2]	BUSHING
1M-6422	[12]	STUD
		(PARTS OF CASE ASSEM. 1M6436)
7M-1195	[1]	HOUSING
8H-5783	[4]	RING (STANDARD)
1S-5561 CH	[4]	RING (.015" OVERSIZE)
6P-8263 CH	[4]	RING (.030" OVERSIZE)
9H-5233	[4]	PISTON
8H-5784	[5]	RING
1M-4167	[3]	SHAFT
1M-4153	[1]	CARRIER
1M-4174	[1]	SHAFT
5M-3999	[1]	SHAFT
1M-4091	[1]	SPACER
6F-0155	[2]	RING
1M-4171	[1]	CAGE
0S-0509	[3]	BOLT
5M-2976	[3]	LOCK
1B-8706	[6]	KEY
5M-1164	[42]	WASHER (BRONZE)
1M-4177	[42]	WASHER (STEEL)
1M-6421	[16]	STUD (1 32" LONG)
9H-2403	[4]	STUD (1.437" LONG)
		(PARTS OF CASE ASSEM. 1M6436)
0S-1591	[2]	BOLT
3B-4506	[2]	LOCKWASHER
4M-2370	[1]	COVER
1M-3847	[1]	GASKET
1M-6436	[1]	CASE ASSEM.
1M-6424	[4]	STUD
		(PART OF CASE ASSEM. 1M6436)
1M-4409	[1]	CAGE
5M-3946	[1]	CAGE
6H-3910	[1]	LOCK
0S-1593	[2]	BOLT
3H-8507	[1]	RETAINER
7H-7630	[1]	SPACER
8H-9155	[1]	SEAL
9H-0415	[2]	RING
3B-1915	[8]	BOLT
3B-4506	[8]	LOCKWASHER
9H-5548	[1]	SEAL
0S-1594	[12]	BOLT
0L-0796	[6]	LOCK
4M-8966	[3]	SLEEVE
5H-6005	[6]	SEAL
5M-4000	[1]	CARRIER
1M-8657	[2]	BOLT
2M-0849	[2]	WASHER
7M-1191	[1]	HOUSING ASSEM.
C		INDICATES CHANGE
H		NOT PART OF PLANETARY TRANSMIS

PLANETARY TRANSMISSION

PLANETARY TRANSMISSION--Part 2 of 2
Effective with Serial No. 46A1980-Up and Test No. 2191-Up
Part of 7M798 Transmission Group shown on Page 152. Note: This Transmission provides the following maximum speeds: (Forward) First--2.5,
Second--4.4 and Third--6.9 M.P.H.; (Reverse) First--2.9,Second--5.0 and Third--8.0 M.P.H. Only separate parts serviced. When complete Unit
is required order 7M798 shown on Page 152

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
7M-1249	[1]	PISTON
1M-4155	[1]	GEAR (138 & 90T.)
7M-1161	[3]	PLATE
1M-4156	[1]	GEAR (138 & 89 .)
4M-3915	[42]	BEARING ASSEM.
0S-0509	[6]	BOLT
1M-4180	[3]	LOCK
1M-4179	[3]	PLATE
0T-0065	[3]	BOLT
5M-2894	[3]	WASHER
4M-8967	[1]	GEAR (39 T.)
0L-2070	[6]	BOLT
5M-2894	[6]	WASHER
1M-4163	[3]	GEAR (29 T.)
1M-4093	[1]	RING
1M-4161	[3]	GEAR (21 T.IDLER)
1M-4166	[3]	SHAFT
2F-6869	[3]	DOWEL
5M-4470	[6]	GEAR (27 T.)
5M-3996	[1]	GEAR (81 T.)
7M-1186	[1]	HOUSING ASSEM.
5M-7937	[2]	DOWEL
		(PART OF HOUSING ASSEM. 7M1186)
7M-1185	[1]	HOUSING ASSEM.
5M-7937	[2]	DOWEL
		(PART OF HOUSING ASSEM. 7M1185)
7M-1184	[1]	HOUSING ASSEM.
5M-7937	[2]	DOWEL
		(PART OF HOUSING ASSEM. 7M1184)
6H-2839	[10]	PLATE
7M-1385	[15]	DISC ASSEM.
6H-3465	[1]	RING
7M-1189	[1]	PLATE ASSEM.
7M-1201	[2]	DOWEL (2" LONG)
2D-6642	[2]	BALL
		(PARTS OF PLATE ASSEM. 7M1189)
7M-1314	[1]	GEAR (128 & 87T.)
0S-0509	[2]	BOLT
0L-0364	[2]	LOCK
2M-7352	[1]	COVER
2M-7359	[1]	GASKET
5M-3998	[1]	GEAR (138 & 88 T.)
1M-4157	[9]	GEAR (19 T.)
2D-6642	[3]	BALL
5M-3948	[3]	SHAFT
0S-0509	[6]	BOLT
3H-3451	[3]	LOCK
9H-0438	[1]	RING
2M-3827	[1]	RING
7H-7628	[1]	BEARING ASSEM.
7H-7629	[1]	RACE
4M-5858	[2]	BEARING
6H-6043	[1]	RING
4M-8958	[1]	RACE (OUTER)
9H-5273	[1]	FLANGE
1M-4095	[1]	BEARING ASSEM.
9H-5433	[1]	SPACER
5M-0549	[1]	GEAR (27 T.)
5M-4427	[1]	GEAR (50 T.)
5M-3947	[3]	SHAFT
9H-6530	[14]	BOLT
2M-0849	[14]	WASHER
9H-5537	[36]	SPRING (SHORT)
9H-5545	[18]	PIN (SHORT)
9H-5546	[6]	PIN (LONG)
9H-5536	[12]	SPRING (LONG)

PLANETARY TRANSMISSION

PLANETARY TRANSMISSION--Part 1 of 2--Field Installation
Part of 7M798 Transmission Group shown on Page 152. Only separate parts serviced
When complete Unit is required order 7M798 shown on Page 152

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1M-6423	[2]	STUD
		(PART OF CASE ASSEM 5M7979)
1M-6455	[1]	GASKET
3F-7414	[2]	BUSHING
1F-0929	[2]	BUSHING
1M-6422	[12]	STUD
		(PARTS OF CASE ASSEM. 5M7979)
8H-5783	[4]	RING (STANDARD)
1S-5561 H	[4]	RING (.015"OVERSIZE)
6P-8263 CH	[4]	RING (.030"OVERSIZE)
7M-1195	[1]	HOUSING
9H-5233	[4]	PISTON
8H-5784	[5]	RING
1M-4167	[3]	SHAFT
1M-4153	[1]	CARRIER
1M-4174	[1]	SHAFT
5M-3999	[1]	SHAFT
1M-4091	[1]	SPACER
6F-0155	[2]	RING
1M-4171	[1]	CAGE
0S-0509	[3]	BOLT
5M-2976	[3]	LOCK
1B-8706	[6]	KEY
5M-1164	[42]	WASHER (BRONZE)
1M-4177	[42]	WASHER (STEEL)
5M-6130	[16]	STUD (1.32" LONG)
9H-2403	[4]	STUD (1.437"LONG)
		(PARTS OF CASE ASSEM 5M7979)
0S-1591	[2]	BOLT
3B-4506	[2]	LOCKWASHER
4M-2370	[1]	COVER
1M-3847	[1]	GASKET
5M-7979	[1]	CASE ASSEM
5M-7974	[4]	STUD
		(PART OF CASE ASSEM. 5M7979)
1M-4409	[1]	CAGE
6H-3465	[1]	RING (STANDARD)
1S-5560 H	[1]	RING (.015"OVERSIZE)
6P-8262 CH	[1]	RING (.030"OVERSIZE)
5M-3946	[1]	CAGE
6H-3910	[1]	LOCK
0S-1593	[2]	BOLT
3H-8507	[1]	RETAINER
7H-7630	[1]	SPACER
8H-9155	[1]	SEAL
9H-0415	[2]	RING
3B-1915	[8]	BOLT
3B-4506	[8]	LOCKWASHER
9H-5548	[1]	SEAL
0S-1594	[12]	BOLT
0L-0796	[6]	LOCK
4M-8966	[3]	SLEEVE
5H-6005	[6]	SEAL
5M-4000	[1]	CARRIER
1M-8657	[2]	BOLT
2M-0849	[2]	WASHER
7M-1191	[1]	HOUSING ASSEM.
C		INDICATES CHANGE
H		NOT PART OF PLANETARY TRANSMIS

PLANETARY TRANSMISSION

PLANETARY TRANSMISSION--Part 2 of 2--Field Installation
Part of 7M798 Transmission Group shown on Page 152. Only separate parts serviced. When complete Unit is required order 7M798 shown on Page 152

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
7M-1249	[1]	PISTON
1M-4155	[1]	GEAR (138 & 90T.)
7M-1161	[3]	PLATE
1M-4156	[1]	GEAR (138 & 89T.)
4M-3915	[42]	BEARING ASSEM.
0S-0509	[6]	BOLT
1M-4180	[3]	LOCK
1M-4179	[3]	PLATE
0T-0065	[3]	BOLT
5M-2894	[3]	WASHER
4M-8967	[1]	GEAR (39 T.)
0L-2070	[6]	BOLT
5M-2894	[6]	WASHER
1M-4163	[3]	GEAR (29 T.)
1M-4093	[1]	RING
1M-4161	[3]	GEAR (21 T. IDLER)
1M-4166	[3]	SHAFT
2F-6869	[3]	DOWEL
5M-4470	[6]	GEAR (27 T.)
5M-3996	[1]	GEAR (81 T.)
7M-1186	[1]	HOUSING ASSEM.
5M-7937	[2]	DOWEL
		(PART OF HOUSING ASSEM. 7M1186)
7M-1185	[1]	HOUSING ASSEM.
5M-7937	[2]	DOWEL
		(PART OF HOUSING ASSEM. 7M1185)
7M-1184	[1]	HOUSING ASSEM.
5M-7937	[2]	DOWEL
		(PaRT OF HOUSING ASSEM. 7M1184)
6H-2839	[10]	PLATE
7M-1385	[15]	DISC ASSEM.
7M-1189	[1]	PLATE ASSEM.
7M-1201	[2]	DOWEL (2"LONG)
2D-6642	[2]	BALL
		(PARTS OF PLATE ASSEM.7M1189)
7M-1314	[1]	GEAR (128 & 87T.)
0S-0509	[2]	BOLT
0L-0364	[2]	LOCK
2M-7352	[1]	COVER
2M-7359	[1]	GASKET
5M-3998	[1]	GEAR (138 & 88T.)
1M-4157	[9]	GEAR (19 T.)
2D-6642	[3]	BALL
5M-3948	[3]	SHAFT
0S-0509	[6]	BOLT
3H-3451	[3]	LOCK
9H-0438	[1]	RING
2M-3827	[1]	RING
7H-7628	[1]	BEARING ASSEM.
7H-7629	[1]	RACE
4M-5858	[2]	BEARING
6H-6043	[1]	RING
4M-8958	[1]	RACE (OUTER)
9H-5273	[1]	FLANGE
1M-4095	[1]	BEARING ASSEM.
9H-5433	[1]	SPACER
5M-0549	[1]	GEAR (27 T.)
5M-4427	[1]	GEAR (50 T.)
5M-3947	[3]	SHAFT
9H-6530	[14]	BOLT
2M-0849	[14]	WASHER
9H-5537	[36]	SPRING (SHORT)
9H-5545	[18]	PIN (SHORT)
9H-5546	[6]	PIN (LONG)
9H-5536	[12]	SPRING (LONG)

7M-0798: TRANSMISSION GROUP

TRANSMISSION GROUP

7M798 TRANSMISSION GROUP - Type 1
Effective with Serial No. 46A1980-Up and Test No. 2191-Up
Transmission Hydraulic Control, Planetary Transmission and Transfer Gears parts are shown on Pages 141, 142, 150, 151, 154 and 155

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
5M-9621	[4]	STUD
		(PART OF COVER ASSEM. 7M1151)
1B-4203	[20]	NUT
3B-4506	[20]	LOCKWASHER
3B-0039	[1]	COVER
8B-9777	[1]	GASKET
Y	[1]	CONTROL GROUP
		(SEE SEPARATE ILLUS. FOR PARTS)
1M-3756	[1]	TUBE
4F-8946	[2]	SEAL
5M-2477	[1]	PLATE (GROUP NO.)
7B-3028	[2]	SCREW
		(NOT SHOWN-MOUNTED ON TOP OF TRANSMISSION CASE)
	[1]	PLANETARY GROUP
		(SEE SEPARATE ILLUS. FOR PARTS)
	[1]	GEAR GROUP
		(SEE SEPARATE ILLUS. FOR PARTS)
0S-0509	[4]	BOLT
3B-4506	[4]	LOCKWASHER
5M-9653	[1]	COVER
5M-9654	[1]	GASKET
5M-7908	[1]	PLUG ASSEM.
3J-1907	[1]	SEAL
		(PART OF PLUG ASSEM. 5M7908)
7M-1151	[1]	COVER ASSEM.
1M-6420	[1]	GASKET
7M-1324	[1]	FITTING
		(PART OF COVER ASSEM. 7M1151)
4F-7952	[1]	SEAL
1M-2662	[1]	TUBE ASSEM.
4F-7952	[1]	SEAL (1.490" I.D.)
4F-7391	[1]	SEAL (1.290" I.D.)
2M-7061	[1]	TUBE
1A-2029	[4]	BOLT
3B-4506	[4]	LOCKWASHER
4F-8946	[2]	SEAL
5F-7054	[1]	SEAL
5M-1178	[1]	TUBE
1B-4203	[4]	NUT
3B-4506	[4]	LOCKWASHER
7M-0784	[1]	VALVE GROUP
		(SEE SEPARATE ILLUS. FOR PARTS)
1M-2666	[1]	TUBE
5F-7054	[2]	SEAL
1M-2711	[2]	GASKET
1M-2709	[2]	TUBE
1H-5728	[4]	SEAL
1M-2710	[2]	SCREEN
Y		SEPARATE ILLUSTRATION

7M-0798: TRANSMISSION GROUP

TRANSMISSION GROUP

7M798 TRANSMISSION GROUP--Field Installation - Type 2
Effective with Serial No. 46A1980-Up and Test No. 2191-Up
Transmission Hydraulic Control, Planetary Transmission, 7M784 Valve Group and Transfer Gear parts are shown on Pages 141, 142 and 150 through 155

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
5M-9621	[4]	STUD
		(PART OF COVER ASSEM. 7M1151)
1B-4203	[24]	NUT
3B-4506	[24]	LOCKWASHER
3B-0039	[1]	COVER
8B-9777	[1]	GASKET
Y	[1]	CONTROL GROUP
		(SEE SEPARATE ILLUSTRATION)
1M-3756	[1]	TUBE
4F-8946	[2]	SEAL
5M-2477	[1]	PLATE (GROUP NO.)
7B-3028	[2]	SCREW
		NOT SHOWN-MOUNTED ON TOP OF TRANSMISSION CASE)
Y	[1]	PLANETARY GROUP
		(SEE SEPARATE ILLUSTRATION)
Y	[1]	GEAR GROUP
		(SEE SEPARATE ILLUSTRATION)
0S-0509	[4]	BOLT
3B-4506	[4]	LOCKWASHER
1M-2709	[2]	TUBE
1M-2710	[2]	SCREEN
5M-9653	[1]	COVER
5M-9654	[1]	GASKET
5M-7908	[1]	PLUG ASSEM.
3J-1907	[1]	SEAL
		(PART OF PLUG ASSEM. 5M7908)
7M-1151	[1]	COVER ASSEM.
1M-6420	[1]	GASKET
7M-1324	[1]	FITTING
		(PART OF COVER ASSEM. 7M1151)
4F-7952	[1]	SEAL
7M-1247	[1]	TUBE ASSEM.
4F-7952	[1]	SEAL (1.490" I.D.)
4F-7391	[1]	SEAL (1.290" I.D.)
2M-7061	[1]	TUBE
1A-2029	[4]	BOLT
3B-4506	[4]	LOCKWASHER
0S-1594	[2]	BOLT
3B-4506	[2]	LOCKWASHER
5H-2830	[1]	COVER
4H-5952	[1]	GASKET
4F-8946	[2]	SEAL
5M-1178	[1]	TUBE
7M-0784 Y	[1]	VALVE GROUP
		(SEE SEPARATE ILLUSTRATION)
1M-2666	[1]	TUBE
7M-8543	[1]	COVER
2D-0092	[1]	GASKET
0L-1351	[4]	BOLT
3B-4506	[4]	LOCKWASHER
5F-7054	[3]	SEAL
7M-1246	[1]	TUBE ASSEM.
0L-1351	[2]	BOLT (.875" LONG)
3B-4506	[2]	LOCKWASHER
1M-2711	[2]	GASKET
0S-0509	[2]	BOLT (.75" LONG)
3B-4506	[2]	LOCKWASHER
1H-5728	[4]	SEAL
Y		SEPARATE ILLUSTRATION

7M-0784: VALVE GROUP

VALVE GROUP

7M784 VALVE GROUP
Serial No. 46A1980 to 46A2837 inclusive. Test No. 2191 to No. 3161 inclusive
Part of 7M798 Transmission Group. Only separate parts serviced

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1M-2664	[1]	BODY
2B-2695	[2]	BOLT
3B-4505	[2]	LOCKWASHER
7H-1683	[1]	GASKET
8F-3398	[1]	SPRING
7B-4948	[1]	COVER
1M-2665	[1]	VALVE
5M-6214	[1]	PLUG
1M-2668	[1]	GASKET

7M-0784: VALVE GROUP

VALVE GROUP

7M784 VALVE GROUP
Effective with Serial No. 46A2838-Up and Test No. 3162-Up
Part of 7M798 Transmission Group. Only separate parts serviced

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1M-2664	[1]	BODY
2B-2695	[2]	BOLT
3B-4505	[2]	LOCKWASHER
7H-1683	[1]	GASKET
8F-3398	[1]	SPRING
7B-4948	[1]	COVER
1M-2665	[1]	VALVE
5M-7908	[1]	PLUG ASSEM.
3J-1907	[1]	SEAL
		(PART OF PLUG ASSEM. 5M7908)
1M-2668	[1]	GASKET

TRANSFER GEARS

TRANSFER GEARS
Serial No. 46A1 to 46A2145, 46A2147 to 46A2157 and 46A2194 to 46A2198 inclusive
Test No. 1 to No. 2396 and No. 2429 to No. 2433 inclusive. Also part of 7M798 Transmission
Group and 4M3814 Transmission Arrangement shown on Pages 152 and 258

Parts for your D8H TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1B-4205	[14]	NUT
3B-4508	[14]	LOCKWASHER
1M-2656	[1]	CASE ASSEM.
1A-2029	[6]	BOLT
5H-5782	[3]	LOCK
6H-6043	[1]	RING
0L-2061	[1]	DOWEL
		(PART OF CASE ASSEM. 1M2656)
9H-3360	[1]	SEAL
2A-3746	[1]	PLUG
5H-0530	[1]	DOWEL
2A-3746	[1]	PLUG
1M-4172	[1]	GEAR (40 T.)
3F-1526	[1]	DOWEL
1M-4343	[1]	RING
1K-6986	[1]	RING
1M-4169	[2]	RING
1M-4344	[1]	CAGE ASSEM.
1M-4342	[1]	RETAINER
5H-1901	[1]	OUTER RACE ASSEM.
6H-7614	[2]	INNER RACE & ROLLER ASSEM.
2M-8868	[2]	OUTER RACE
3F-5750	[1]	OUTER RACE
7F-3587	[1]	PLATE
4B-3823	[2]	BOLT
1A-1399	[1]	LOCK
3B-8845	[1]	INNER RACE & ROLLER ASSEM.
9H-1980	[1]	PINION (21T.)
1M-1480	[1]	SPACER
2M-0168 H	[1]	PLATE (ARR. NO.)
7B-3028 H	[2]	SCREW
		(NOT SHOWN)
8H-5346	[1]	INNER RACE & ROLLER ASSEM.
8H-5345	[1]	OUTER RACE
3B-8852	[1]	DOWEL
0L-1026	[1]	PLUG
1M-4098	[1]	GEAR (47T.)
2F-7770	[1]	DOWEL
0L-1026	[2]	PLUG
1B-4206	[8]	NUT
3B-4510	[8]	LOCKWASHER
1M-6422	[8]	STUD
		(PART OF CASE ASSEM. 1M2656)
1B-4205	[8]	NUT
3B-4508	[8]	LOCKWASHER
H		NOT PART OF THIS GROUP

Information:

POWER TRAIN

TRANSMISSION GP

Special Instruction

Installation Of Additional Studs To Hold Transmission In Position{3150, 3159, 4059}
Installation Of Additional Studs To Hold Transmission In Position{3150, 3159, 4059}

Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}

Tool Operating Manual

396-6461 Tube Assembly{0374, 0599, 0632, 3030, 3258}
396-6461 Tube Assembly{0374, 0599, 0632, 3030, 3258}

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Reuse And Salvage Guidelines

Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}

Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}

Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}

Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}

Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}

Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material {3030, 3155, 3190}

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}

Clutch Housings and Clutch Pistons for Transmissions and Torque Dividers {3169, 3170}
Clutch Housings and Clutch Pistons for Transmissions and Torque Dividers {3169, 3170}

Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}

Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}

Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}

Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}

Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}

Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}

Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}

Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}

Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}

Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}

Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}

Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Bench Test Procedures

Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}

Service Magazine

Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25

Four 5M1167 Bolts Are Part Of Shipment When Parts Replacement 7M1191 Clutch Housing Is Ordered{3169}
1977/11/14

Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27

Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog D8H :

Truck sale:

22,300 USD

Caterpillar D8H, Construction
- Dozers
BLANCHARD MACHINERY CO.

26,000

Caterpillar D8H, Construction
- Dozers
H.O. PENN MACHINERY CO., INC.

CATERPILLAR D8H 1972
- TRACK TYPE TRACTORS
H O PENN MCHY
122 Noxon Road - Poughkeepsie - New Yo

CAT D8H

Don Smock Auction Co.
Pendleton, Indiana 46064

Call

CAT D8H

Walker Machinery