AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

G342 ENGINE 71B00001-UP FUEL SYSTEM Caterpillar SIS



GAS ENGINE G342C GAS ENGINE 71B
 G342 ENGINE 71B00001-UP UE034746 G342C 71B   (1969)

Parts group G342C:

  For full view, you need register
FUEL SYSTEM
CARBURETOR GP
AIR CLEANER AND CARBURETOR
AIR CLEANER AND CARBURETOR
AIR CLEANER AND CARBURETOR
Serial No. 71B1 to 71B65 inclusive
5L7543 Carburetor, 5L2591 Regulator and 4L4721 Air Cleaner parts are shown on Pages 14, 15 and 16
AIR CLEANER AND CARBURETOR
AIR CLEANER AND CARBURETOR
AIR CLEANER AND CARBURETOR
Serial No. 71B66 to 71B116, 71B118 to 71B215, 71B219 to 71B242 and 71B244 inclusive
5L7543 Carburetor, 5L2591 Regulator and 4L4721 Air Cleaner parts are shown on Pages 14, 15 and 16
AIR CLEANER AND CARBURETOR
AIR CLEANER AND CARBURETOR
AIR CLEANER AND CARBURETOR
Serial No. 71B117, 71B216 to 71B218, 71B243 and 71B245 to 71B749 inclusive
6L3384 Carburetor and 4L4721 Air Cleaner parts are shown on Pages 14A and 16
AIR CLEANER & CARBURETOR GP
6L-4146 AIR CLEANER & CARBURETOR GP
6L4146 AIR CLEANER AND CARBURETOR GROUP
Serial No. 71B750 To 71B2670 Inclusive
6L3384 Carburetor & 4L4721 Air Cleaner Parts Are Shown On Pages 14A & 16
AIR CLEANER & CARBURETOR GP
6L-4146 AIR CLEANER & CARBURETOR GP
6L4146 AIR CLEANER & CARBURETOR GP
Type 1. S/N 71B2671-Up
6L3384-Page 14A & 4L4721-Page 16
An Attachment
AIR CLEANER & CARBURETOR GP
6L-4146 AIR CLEANER & CARBURETOR GP
6L4146 AIR CLEANER & CARBURETOR GP
Type 2. S/N 71B2671-Up
4L4721-Page 16 & 9Y5302-Page 14B
An Attachment
CARBURETOR ASSEMBLY
5L-7543 CARBURETOR ASSEMBLY
5L7543 CARBURETOR ASSEMBLY
Part of Air Cleaner and Carburetor shown on Pages 12D and 12E
NOTE: 7H3693 Venturi Assembly is available
CARBURETOR AS
6L-3384 CARBURETOR AS
6L3384 CARBURETOR AS-L.H.
Natural Gas
Replaced By 9Y5302-Page 14B
Part Of 6L4146 Air Cleaner & Carburetor
CARBURETOR AS
9Y-5302 CARBURETOR AS
9Y5302 CARBURETOR AS-L.H.
Natural Gas
S/N 71B2671-Up. Part Of 6L4146 Air Cleaner
& Carburetor. An Attachment
CARBURETOR AS
6L-7355 CARBURETOR AS
6L7355 CARBURETOR ASSEMBLY--LOW BTU
Replaced By 9Y5300-Page 90A.03
For Use With Digestor Gas. An Attachment
CARBURETOR AS
9Y-5300 CARBURETOR AS
9Y5300 CARBURETOR AS
An Attachment
CONTROL GP-GOVERNOR
GOVERNOR CONTROL GROUP
3L-8869 GOVERNOR CONTROL GROUP
3L8869 GOVERNOR CONTROL GROUP--Positive Locking
Also part of 4L9582 Mounting Group shown on Page 100
4L7604 Handle Group parts are shown on Page 98
GOVERNOR LEVER CONTROL GROUP
4L-6811 GOVERNOR LEVER CONTROL GROUP
4L6811 GOVERNOR LEVER CONTROL GROUP
HANDLE GP-CONTROL
4L-7604 HANDLE GP-CONTROL
4L7604 HANDLE GROUP
Also part of 3L8869 Governor Control Group shown on Page 97
LINK GROUP
4L-9581 LINK GROUP
4L9581 LINK GROUP
GOVERNOR CONTROL MOUNTING GROUP--R.H.
5L-1605 GOVERNOR CONTROL MOUNTING GROUP--R.H.
5L1605 GOVERNOR CONTROL MOUNTING GROUP--R.H.
GOVERNOR CONTROL MOUNTING GROUP--L.H.
4L-9582 GOVERNOR CONTROL MOUNTING GROUP--L.H.
4L9582 GOVERNOR CONTROL MOUNTING GROUP--L.H.
3L8869 Governor Control Group parts are shown on Page 97
DRIVE GP-TACHOMETER
DRIVE GP-TACHOMETER
4L-5789 DRIVE GP-TACHOMETER
4L5789 TACHOMETER DRIVE GROUP
DRIVE GP-TACHOMETER
1M-5061 DRIVE GP-TACHOMETER
1M5061 TACHOMETER DRIVE GROUP
Part of 4L5789 Tachometer Drive Group
GOVERNOR GP
GOVERNOR DRIVE
GOVERNOR DRIVE
GOVERNOR DRIVE
Serial No. 71B1 to 71B146 inclusive
DRIVE GP-GOVERNOR & MAGNETO
5L-9041 DRIVE GP-GOVERNOR & MAGNETO
GOVERNOR AND MAGNETO DRIVE (5L9041 N/S)
Serial No. 71B147 to 71B757 inclusive
DRIVE GP-GOVERNOR & MAGNETO
5L-9041 DRIVE GP-GOVERNOR & MAGNETO
5L9041 GOVERNOR AND MAGNETO DRIVE GROUP
Serial No. 71B758 To 71B3547 inclusive
DRIVE GP-GOVERNOR & MAGNETO
5L-9041 DRIVE GP-GOVERNOR & MAGNETO
5L9041 GOVERNOR AND MAGNETO DRIVE GROUP--PART 1 OF 2
Serial No. 71B3548-Up
DRIVE GP-GOVERNOR & MAGNETO
5L-9041 DRIVE GP-GOVERNOR & MAGNETO
5L9041 GOVERNOR AND MAGNETO DRIVE GROUP--PART 2 OF 2
Serial No. 71B3548-Up
GOVERNOR
5L-8789 GOVERNOR
GOVERNOR (5L8789 N/S)
Serial No. 71B1 to 71B817 inclusive
Refer also to Page 96 for special parts
GOVERNOR
5L-8789 GOVERNOR
GOVERNOR (5L8789 N/S)
Serial No. 71B818-Up
Refer also to Page 96 for special parts
GOVERNOR GP
4L-3700 GOVERNOR GP
4L3700 WOODWARD GOVERNOR GROUP--TYPE 1
4L3702--Page 94E
GOVERNOR GP
4L-3700 GOVERNOR GP
4L3700 WOODWARD GOVERNOR GROUP--TYPE 2
4L3702--Page 94E
GOVERNOR GP
4L-3700 GOVERNOR GP
4L3700 WOODWARD GOVERNOR GROUP--TYPE 3
4L3702--Page 94E
GOVERNOR GP
4L-3700 GOVERNOR GP
4L3700 WOODWARD GOVERNOR GROUP--TYPE 4
4L3702-Page 94F, 2N6220-Page 95
GOVERNOR GP
4L-3700 GOVERNOR GP
4L3700 WOODWARD GOVERNOR GROUP--TYPE 5
1W8947--Page 95A, 8N6670--Page 98A
WOODWARD GOVERNOR ASSEMBLY
4L-3702 WOODWARD GOVERNOR ASSEMBLY
4L3702 WOODWARD GOVERNOR ASSEMBLY--TYPE 1
Part Of 4L3700 Woodward Governor
Only Separate Parts Serviced. When Complete Assembly Is Required
Order 2N6220--Page 95
WOODWARD GOVERNOR ASSEMBLY
4L-3702 WOODWARD GOVERNOR ASSEMBLY
4L3702 WOODWARD GOVERNOR ASSEMBLY--TYPE 2
Part Of 4L3700 Woodward Governor
Only Separate Parts Serviced. When Assembly Is Required Order
2N6220--Page 95
WOODWARD GOVERNOR ASSEMBLY
2N-6220 WOODWARD GOVERNOR ASSEMBLY
2N6220 WOODWARD GOVERNOR ASSEMBLY
Part Of 4L3700 Woodward Governor
GOVERNOR GP
1W-8947 GOVERNOR GP
1W8947 WOODWARD GOVERNOR GROUP--TYPE 1
1W8948-Page 95B
Part Of 4L3700 Woodward Governor
GOVERNOR GP
1W-8947 GOVERNOR GP
1W8947 WOODWARD GOVERNOR GROUP--TYPE 2
4W6812-Page 95C
Part Of 4L3700 Woodward Governor
GOVERNOR GP
1W-8948 GOVERNOR GP
1W8948 GOVERNOR GP-WOODWARD
Replaced By 4W6812-Page 95C
Part Of 1W8947 Governor-Woodward
GOVERNOR GP
4W-6812 GOVERNOR GP
4W6812 GOVERNOR GP-BASIC
(Woodward)-Type 1
Part Of 1W8947 Governor
An Attachment
GOVERNOR GP
4W-6812 GOVERNOR GP
4W6812 GOVERNOR GP--BASIC
(Woodward)--Type 2
Part Of 1W8947 Governor
An Attachment
GOVERNOR CONVERSION GROUP
5L-9565 GOVERNOR CONVERSION GROUP
5L9565 GOVERNOR CONVERSION GROUP--1000 R.P.M.
GOVERNOR CONVERSION GROUP
5L-9564 GOVERNOR CONVERSION GROUP
5L9564 GOVERNOR CONVERSION GROUP--1300 R.P.M.
SWITCH GP-WOODWARD GOVERNOR
8N-6670 SWITCH GP-WOODWARD GOVERNOR
8N6670 WOODWARD GOVERNOR SWITCH GROUP
Part Of 4L3700 Woodward Governor
LINES GP-FUEL
FLEXIBLE FUEL LINES GROUP
4H-1904 FLEXIBLE FUEL LINES GROUP
4H1904 FLEXIBLE FUEL LINES GROUP
Part of 7L5053 Generator Installation Group
REGULATOR GP-GAS PRESSURE
GAS PRESSURE REGULATOR GROUP
5L-9083 GAS PRESSURE REGULATOR GROUP
5L9083 GAS PRESSURE REGULATOR GROUP
Serial No. 71B1 to 116, 118 to 215, 219 to 242 and 71B244 inclusive
Part of 5L9259 Conversion Arrangement listed on Page 84
GAS PRESSURE REGULATOR ASSEMBLY
5L-6452 GAS PRESSURE REGULATOR ASSEMBLY
5L6452 GAS PRESSURE REGULATOR ASSEMBLY
Part of 5L9083 Gas Pressure Regulator Group
GAS PRESSURE REGULATOR GROUP
6L-4143 GAS PRESSURE REGULATOR GROUP
6L4143 GAS PRESSURE REGULATOR GROUP--Type 1
Serial No. 71B117, 216 to 218, 243 & 71B245 to 71B749 inclusive
Also part of 5L9259 Arrangement listed on Page 84
6L4104 Regulator parts are shown on Page 88E
GAS PRESSURE REGULATOR GROUP
6L-4143 GAS PRESSURE REGULATOR GROUP
6L4143 GAS PRESSURE REGULATOR GROUP--Type 2
Serial No. 71B117, 216 to 218, 243 & 71B245 to 71B749 inclusive
Also part of 5L9259 Arrangement listed on Page 84
6L4104 Regulator parts are shown on Page 88E
GAS PRESSURE REGULATOR GROUP
6L-4143 GAS PRESSURE REGULATOR GROUP
6L4143 GAS PRESSURE REGULATOR GROUP--Type 3
Serial No. 71B117, 216 to 218, 243 & 71B245 to 71B749 inclusive
Also part of 5L9259 Arrangement listed on Page 84
GAS PRESSURE REGULATOR GROUP
6L-4143 GAS PRESSURE REGULATOR GROUP
6L4143 GAS PRESSURE REGULATOR GROUP
Effective with Serial No. 71B750
Also part of 5L9259 & 7L2759 Arrangements listed on Pages 84 & 84A
REGULATOR AS
6L-4104 REGULATOR AS
6L4104 GAS PRESSURE REGULATOR ASSEMBLY
Part Of 6L4143 Gas Pressure Regulator Shown On Pages 88C & 88D
GAS PRESSURE REGULATOR GROUP
5L-9312 GAS PRESSURE REGULATOR GROUP
5L9312 GAS PRESSURE REGULATOR GROUP--Type 1
Serial No. 71B1 to 71B116, 71B118 to 71B215, 71B219 to 71B242 and 71B244 inclusive
FOR USE WITH NATURAL GAS
GAS PRESSURE REGULATOR GROUP
5L-9312 GAS PRESSURE REGULATOR GROUP
5L9312 GAS PRESSURE REGULATOR GROUP--Type 2
Serial No. 71B1 to 71B116, 71B118 to 71B215 71B219 to 71B242 and 71B244 inclusive
FOR USE WITH NATURAL GAS
REGULATOR ASSEMBLY
5B-7529 REGULATOR ASSEMBLY
5B7529 REGULATOR ASSEMBLY
Part of 5L9312 Gas Pressure Regulator Group
GAS PRESSURE REGULATOR GROUP
3N-7084 GAS PRESSURE REGULATOR GROUP
3N7084 GAS PRESSURE REGULATOR GROUP
6L4104 Regulator parts are shown on Page 88E
To provide a dual system for use with either natural gas and vaporized propane or natural gas and digestor gas

Information:

(For parts list, see above)

Engine News
New Sleeve-Type Bearings Give Better Carburetor And Governor Control
1991/02/01
Service Magazine
New Sleeve-Type Bearings Give Better Carburetor And Governor Control{1265,1266}
1991/02/11
Engine News
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Modification To Prevent Oil Leaks Around Governor Control Shaft
1988/04/01
New Sleeve-Type Bearings Give Better Carburetor And Governor Control
1991/02/01
Special Instruction
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Modification To Prevent Oil Leaks Around Governor Control Shaft{1265,1287}
1988/04/18
New Sleeve-Type Bearings Give Better Carburetor And Governor Control{1265,1266}
1991/02/11
Specifications
Drive For The Tachometer<BR> (1M5061)
G342C NATURAL GAS ENGINE ATTACHMENTS
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Improved Fuel Priming Pump Used
1987/05/01
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Operation and Maintenance Manual
Fuel Filtration
Cat Gas Engine Lubricant, Fuel, and Coolant Recommendations
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Service Magazine
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Special Instruction
Installation of Natural Gas Flow Meter on Certain Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Natural Gas and Dynamic Gas Blended Engines {1000, 1250, 1901, 7606, 7620}
Installation of Natural Gas Flow Meter on Certain Caterpillar® and Non-Caterpillar Natural Gas and Dynamic Gas Blended Engines {1000, 1250, 1901, 7606, 7620}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage
1984/06/20
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Modification To Prevent Oil Leaks Around Governor Control Shaft
1988/04/01
New Sleeve-Type Bearings Give Better Carburetor And Governor Control
1991/02/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Specifications
Governor And Magneto Drive
G342 ENGINE
Governor Linkage
G342 ENGINE
Governor Drive<BR> (Woodward PSG Governor)
G342C NATURAL GAS ENGINE ATTACHMENTS
Governor Linkage<BR> (Woodward PSG Governor)
G342C NATURAL GAS ENGINE ATTACHMENTS
Woodward PSG Governor<BR> (1W8948)
G342C NATURAL GAS ENGINE ATTACHMENTS
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Modification To Prevent Oil Leaks Around Governor Control Shaft{1265,1287}
1988/04/18
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Sleeve-Type Bearings Give Better Carburetor And Governor Control{1265,1266}
1991/02/11
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Engine News
Fuel Heaters Are Now Available For Field Installation
1980/01/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Explanation Of Differences In Timing Advance Information
1981/08/26
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers
1986/03/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Changes Have Been Made To 0T Microfiche (Fuel Setting And Related Information)
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
New Sleeve-Type Bearings Give Better Carburetor And Governor Control
1991/02/01
Gas Engine Fuel Specifications {1280}
1998/01/20
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Specifications
Woodward PSG Governor<BR> (1W8948)
G342C NATURAL GAS ENGINE ATTACHMENTS
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Priming Pump Used{1258}
1987/04/20
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Modification To Prevent Oil Leaks Around Governor Control Shaft{1265,1287}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Sleeve-Type Bearings Give Better Carburetor And Governor Control{1265,1266}
1991/02/11
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Special Instruction
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Engine News
Improved Fuel Priming Pump Used
1987/05/01
Special Instruction
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Service Magazine
Improved Fuel Priming Pump Used{1258}
1987/04/20
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Fuel Priming Pump Used{1258}
1987/04/20
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Engine News
A New Replacement Gas Regulator Is Available for G342, G343, G353, G379, G398, and G399 Engines {1000, 1270}
2012/07/13
New Gas Shutoff Valves (GSOV) Are Now Used for Certain Gas Engine Applications {1270, 1403}
New Gas Shutoff Valves (GSOV) Are Now Used for Certain Gas Engine Applications {1270, 1403}
Specifications
Vacuum Regulator<BR> (3N4630)
G342 ENGINE
Regulator For Gas Pressure<BR> (6L4104)
G342 ENGINE
Differential Pressure Regulator<BR> (7S7810)
G342 ENGINE
Service Magazine
New Water Temperature Regulator Has A Closer Fit At The Valve Seat To Keep Leakage At A Minimum{1355}
1977/01/17
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Modification To Prevent Oil Leaks Around Governor Control Shaft{1265,1287}
1988/04/18
New Sleeve-Type Bearings Give Better Carburetor And Governor Control{1265,1266}
1991/02/11
Engine News
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/12
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/20
New Engine Timing Indicator Group Available
1986/07/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
New 1U5524 Adapter Cable Available For Use With 6V9060 Spark Timing Adapter Group And 8T5300 Engine Timing Indicator Group
1987/07/01
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Timing Adapter Available To Use With 6V3100 Timing Indicator Group{0781,1550}
1986/05/19
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Fabricated Extension Prevents Fuel &quot;Splash&quot; During Injection Valve Testing{0650,1254}
1977/10/17
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28
4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Special Instruction
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Magazine
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.