AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D342 & G342 ENGINE 31B02478-03984 FUEL SYSTEM Caterpillar SIS



INDUSTRIAL ENGINE D342 INDUSTRIAL ENGINE 31B
 D342 & G342 ENGINE 31B02478-03984 UE034793 D342 31B   (1959)

Parts group D342:

  For full view, you need register
FUEL SYSTEM
CARBURETOR GP
CARBURETOR ASSEMBLY
6H-6618 CARBURETOR ASSEMBLY
6H6618 CARBURETOR ASSEMBLY--Type 1
Part of 4L2532, 5L8472 Air Cleaner and Carburetor Groups and Air Cleaner, Carburetor and Aftercooler shown on Pages 20, 22, 24 and 27
CARBURETOR ASSEMBLY
6H-6618 CARBURETOR ASSEMBLY
6H6618 CARBURETOR ASSEMBLY--Type 2
Part of 4L2532, 5L8472 Air Cleaner and Carburetor Groups and Air Cleaner, Carburetor and Aftercooler shown on Pages 20, 22, 24 and 27
CARBURETOR ASSEMBLY
5L-7543 CARBURETOR ASSEMBLY
5L7543 CARBURETOR ASSEMBLY
Part of 5L8911 Air Cleaner and Carburetor Group and Air Cleaner, Carburetor and Aftercooler shown on Pages 26 and 36
CARBURETOR ASSEMBLY
5L-4209 CARBURETOR ASSEMBLY
5L4209 CARBURETOR ASSEMBLY--Type 1
Part of Air Cleaner, Carburetor and Aftercoolers shown on Pages 30 and 33
CARBURETOR ASSEMBLY
5L-4209 CARBURETOR ASSEMBLY
5L4209 CARBURETOR ASSEMBLY--Type 2
Part of Air Cleaner, Carburetor and Aftercoolers shown on Pages 30 and 33
CARBURETOR ASSEMBLY
5H-1227 CARBURETOR ASSEMBLY
5H1227 CARBURETOR ASSEMBLY
Part of 2L7221 Manifold, Carburetor and Air Cleaner Group
Only separate parts serviced. When complete Carburetor is required order 9H6181 shown on Page 155
CONTROL GP-GOVERNOR
GOVERNOR CONTROL GROUP
1L-9908 GOVERNOR CONTROL GROUP
1L9908 GOVERNOR CONTROL GROUP
Part of 4L607 Turbocharger Arrangement, 4L608 and 4L609 Turbocharger and Water Cooled
Exhaust Manifolds listed on Pages 254 and 255
GOVERNOR CONTROL
3L-8867 GOVERNOR CONTROL
3L8867 GOVERNOR CONTROL--Vernier--R.H.
GOVERNOR CONTROL GROUP
3L-8868 GOVERNOR CONTROL GROUP
3L8868 GOVERNOR CONTROL GROUP--Vernier--L.H.
GOVERNOR CONTROL GROUP
3L-8870 GOVERNOR CONTROL GROUP
3L8870 GOVERNOR CONTROL GROUP--Positive Locking--L.H.
Only separate parts serviced. When complete Group is required order 4L9582 and 3L8869 Groups shown on Pages 293 and 294
GOVERNOR CONTROL MOUNTING GROUP
4L-9582 GOVERNOR CONTROL MOUNTING GROUP
4L9582 GOVERNOR CONTROL MOUNTING GROUP--L.H.
Refer to Page 299 for usage
GOVERNOR CONTROL GROUP
3L-8869 GOVERNOR CONTROL GROUP
3L8869 GOVERNOR CONTROL GROUP--Positive Locking--R.H.
Refer to Page 299 for usage
HANDLE GP-CONTROL
4L-7604 HANDLE GP-CONTROL
4L7604 CONTROL HANDLE GROUP
Part of 3L8869 and 5L3693 Governor Control Groups shown on Pages 294 and 296
Refer to Page 299 for usage
GOVERNOR CONTROL GROUP
3L-8864 GOVERNOR CONTROL GROUP
3L8864 GOVERNOR CONTROL GROUP--Single Cable--L.H.
GOVERNOR CONTROL GROUP
3L-8863 GOVERNOR CONTROL GROUP
3L8863 GOVERNOR CONTROL GROUP--Single Cable--R.H.
CONTROL GP-GOVERNOR
5L-3693 CONTROL GP-GOVERNOR
5L3693 GOVERNOR CONTROL GROUP--Remote Mounted
4L7604 Control Handle Group parts are shown on Page 294
GOVERNOR CONTROL GROUP
3L-2212 GOVERNOR CONTROL GROUP
3L2212 GOVERNOR CONTROL GROUP--Remote--Positive Locking
Only separate parts serviced. When complete Group is required order 5L3693
GOVERNOR CONTROL LEVER GROUP
4L-6811 GOVERNOR CONTROL LEVER GROUP
4L6811 GOVERNOR CONTROL LEVER GROUP
Refer to Page 299 for usage
LINK GROUP
4L-9581 LINK GROUP
4L9581 LINK GROUP--Vernier Control
Refer to Page 299 for usage
GOVERNOR CONTROL CHART
GOVERNOR CONTROL CHART
GOVERNOR CONTROL CHART
DRIVE GP-TACHOMETER
TACHOMETER AND DRIVE GROUP
3L-8469 TACHOMETER AND DRIVE GROUP
3L8469 TACHOMETER AND DRIVE GROUP--R.H.
For use with Hood and Dash
1F3290 Tachometer Drive Group parts are shown on Page 312
Only separate parts serviced
DRIVE GP-TACHOMETER
4L-5789 DRIVE GP-TACHOMETER
4L5789 TACHOMETER DRIVE GROUP
1M5061 Tachometer Drive Group parts are shown on Page 312
TACHOMETER DRIVE GROUP
1F-3290 TACHOMETER DRIVE GROUP
1F3290 TACHOMETER DRIVE GROUP
Part of 3L8469 Tachometer and Drive Group shown on Page 311
DRIVE GP-TACHOMETER
1M-5061 DRIVE GP-TACHOMETER
1M5061 TACHOMETER DRIVE GROUP
Part of 4L5789 Tachometer Drive Group shown on Page 311
FILTER GP-FUEL
FUEL FILTER GROUP
8H-5301 FUEL FILTER GROUP
8H5301 FUEL FILTER GROUP
Serial No. 31B2478 to 31B3419 inclusive
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
FUEL FILTER GROUP
8H-5301 FUEL FILTER GROUP
8H5301 FUEL FILTER GROUP
Serial No. 31B3420-Up
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
FUEL FILTER ADAPTER GROUP
8H-2893 FUEL FILTER ADAPTER GROUP
8H2893 FUEL FILTER ADAPTER GROUP--Type 1
Part of 8H6138 Crude Oil Fuel System Arrangement listed on Page 341
FUEL FILTER ADAPTER GROUP
8H-2893 FUEL FILTER ADAPTER GROUP
8H2893 FUEL FILTER ADAPTER GROUP--Type 2
Part of 8H6138 Crude Oil Fuel System Arrangement listed on Page 341
PRIMARY FUEL FILTER GROUP
3L-8402 PRIMARY FUEL FILTER GROUP
3L8402 PRIMARY FUEL FILTER GROUP--Type 1
FOR USE WITH 4L1109. NATURALLY ASPIRATED ENGINE ARRANGEMENT
Also part of 3L8491, 2L8628 and 2L8753 Base and Fuel Tank Groups shown on
Pages 344, 345 and 346. 8H4681 Filter parts are shown on Page 347
PRIMARY FUEL FILTER GROUP
3L-8402 PRIMARY FUEL FILTER GROUP
3L8402 PRIMARY FUEL FILTER GROUP--Type 2
FOR USE WITH 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
Also part of 3L8491, 2L8628 and 2L8753 Base and Fuel Tank Groups shown on
Pages 344, 345 and 346. 8H4681 Filter parts are shown on Page 347.
PRIMARY FUEL FILTER GROUP
3L-8402 PRIMARY FUEL FILTER GROUP
3L8402 PRIMARY FUEL FILTER GROUP--Type 3
FOR USE WITH 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
Also part of 3L8491, 2L8628 and 2L8753 Base and Fuel Tank Groups shown on
Pages 344, 345 and 346. 8H4681 Filter parts are shown on Page 347.
PRIMARY FUEL FILTER GROUP
3L-8402 PRIMARY FUEL FILTER GROUP
3L8402 PRIMARY FUEL FILTER GROUP--Type 4
FOR USE WITH 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
Also part of 3L8491, 2L8628 and 2L8753 Base and Fuel Tank Groups
shown on Pages 344, 345 and 346
FILTER GP-PRIMARY FUEL
8H-4681 FILTER GP-PRIMARY FUEL
8H4681 FUEL FILTER GROUP
Part of 3L8402 Primary Fuel Filter Group shown on Pages 346A, 346B & 347
GOVERNOR GP
ACCESSORY DRIVE AND GOVERNOR GROUP
3L-5831 ACCESSORY DRIVE AND GOVERNOR GROUP
3L5831 ACCESSORY DRIVE AND GOVERNOR GROUP--Part 1 of 2
Serial No. 31B2478 to 31B2481 inclusive
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
ACCESSORY DRIVE AND GOVERNOR GROUP
3L-5831 ACCESSORY DRIVE AND GOVERNOR GROUP
3L5831 ACCESSORY DRIVE AND GOVERNOR GROUP--Part 2 of 2
Serial No. 31B2478 to 31B2481 inclusive
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
Refer also to Pages 201 through 203 and 310 for special parts
ACCESSORY DRIVE AND GOVERNOR GROUP
3L-5831 ACCESSORY DRIVE AND GOVERNOR GROUP
3L5831 ACCESSORY DRIVE AND GOVERNOR GROUP--Part 1 of 2
Serial No. 31B2482 to 31B2795 inclusive
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
ACCESSORY DRIVE AND GOVERNOR GROUP
3L-5831 ACCESSORY DRIVE AND GOVERNOR GROUP
3L5831 ACCESSORY DRIVE AND GOVERNOR GROUP--Part 2 of 2
Serial No. 31B2482 to 31B2795 inclusive
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
Refer also to Pages 201 through 203 and 310 for special parts
ACCESSORY DRIVE AND GOVERNOR GROUP
3L-5831 ACCESSORY DRIVE AND GOVERNOR GROUP
3L5831 ACCESSORY DRIVE AND GOVERNOR GROUP--Part 1 of 2
Serial No. 31B2796 to 31B2858 inclusive
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
ACCESSORY DRIVE AND GOVERNOR GROUP
3L-5831 ACCESSORY DRIVE AND GOVERNOR GROUP
3L5831 ACCESSORY DRIVE AND GOVERNOR GROUP--Part 2 of 2
Serial No. 31B2796 to 31B2858 inclusive
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
Refer also to Pages 201 through 203 and 310 for special parts
ACCESSORY DRIVE AND GOVERNOR GROUP
3L-5831 ACCESSORY DRIVE AND GOVERNOR GROUP
3L5831 ACCESSORY DRIVE AND GOVERNOR GROUP--Part 1 of 2
Serial No. 31B2859 to 31B3064 inclusive
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
ACCESSORY DRIVE AND GOVERNOR GROUP
3L-5831 ACCESSORY DRIVE AND GOVERNOR GROUP
3L5831 ACCESSORY DRIVE AND GOVERNOR GROUP--Part 2 of 2
Serial No. 31B2859 to 31B3064 inclusive
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
Refer also to Pages 201 through 203 and 310 for special parts
ACCESSORY DRIVE AND GOVERNOR GROUP
3L-5831 ACCESSORY DRIVE AND GOVERNOR GROUP
3L5831 ACCESSORY DRIVE AND GOVERNOR GROUP--Part 1 of 2
Serial No. 31B3065 to 31B3336 inclusive
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
ACCESSORY DRIVE AND GOVERNOR GROUP
3L-5831 ACCESSORY DRIVE AND GOVERNOR GROUP
3L5831 ACCESSORY DRIVE AND GOVERNOR GROUP--Part 2 of 2
Serial No. 31B3065 to 31B3336 inclusive
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
Refer also to Pages 201 through 203 and 310 for special parts
ACCESSORY DRIVE AND GOVERNOR GROUP
3L-5831 ACCESSORY DRIVE AND GOVERNOR GROUP
3L5831 ACCESSORY DRIVE AND GOVERNOR GROUP--Part 1 of 2
Serial No. 31B3337 to 31B3666 inclusive
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
ACCESSORY DRIVE AND GOVERNOR GROUP
3L-5831 ACCESSORY DRIVE AND GOVERNOR GROUP
3L5831 ACCESSORY DRIVE AND GOVERNOR GROUP--Part 2 of 2
Serial No. 31B3337 to 31B3666 inclusive
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
Refer also to Pages 201 through 203 and 310 for special parts
ACCESSORY DRIVE AND GOVERNOR GROUP
3L-5831 ACCESSORY DRIVE AND GOVERNOR GROUP
3L5831 ACCESSORY DRIVE AND GOVERNOR GROUP--Part 1 of 2
Effective with Serial No. 31B3667-Up
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
ACCESSORY DRIVE AND GOVERNOR GROUP
3L-5831 ACCESSORY DRIVE AND GOVERNOR GROUP
3L5831 ACCESSORY DRIVE AND GOVERNOR GROUP--Part 2 of 2
Effective with Serial No. 31B3667
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
Refer also to Pages 201 through 203 and 310 for special parts
GOVERNOR
GOVERNOR
GOVERNOR
PART OF ALL ARRANGEMENTS COVERED IN THIS PARTS BOOK EXCEPTING 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
GOVERNOR DRIVE
GOVERNOR DRIVE
GOVERNOR DRIVE
PART OF ALL ARRANGEMENTS COVERED IN THIS PARTS BOOK EXCEPTING 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
4L-1770 WOODWARD GOVERNOR ARRANGEMENT
4L1770 WOODWARD GOVERNOR ARRANGEMENT
FOR USE WITH 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
WOODWARD GOVERNOR GROUP
5H-4281 WOODWARD GOVERNOR GROUP
5H4281 WOODWARD GOVERNOR GROUP-Type 1
Part of 4L1770 Woodward Governor Arrangement
3L8244 Governor parts are shown on Pages 302 and 303
WOODWARD GOVERNOR GROUP
5H-4281 WOODWARD GOVERNOR GROUP
5H4281 WOODWARD GOVERNOR GROUP--Type 2
Part of 4L1770 Woodward Governor Arrangement
6L4246 Governor parts are shown on Page 300B
WOODWARD GOVERNOR GROUP
5H-4281 WOODWARD GOVERNOR GROUP
5H4281 WOODWARD GOVERNOR GROUP--Type 3
Part of 4L1770 Woodward Governor Arrangement
8L8919 Governor parts are shown on Page 301
WOODWARD GOVERNOR ASSEMBLY
6L-4246 WOODWARD GOVERNOR ASSEMBLY
6L4246 WOODWARD GOVERNOR ASSEMBLY
Part of 5H4281 Woodward Governor Group shown on front side of this insert
GOVERNOR GP
4L-3700 GOVERNOR GP
4L3700 WOODWARD GOVERNOR GROUP
FOR USE WITH ALL ARRANGEMENTS COVERED IN THIS PARTS BOOK EXCEPTING
4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
4L3702 Governor Assembly parts are shown on reverse side of this insert
WOODWARD GOVERNOR ASSEMBLY
4L-3702 WOODWARD GOVERNOR ASSEMBLY
4L3702 WOODWARD GOVERNOR ASSEMBLY--Type 1
Part of 4L3700 Woodward Governor Group shown on front side of this insert
WOODWARD GOVERNOR ASSEMBLY
4L-3702 WOODWARD GOVERNOR ASSEMBLY
4L3702 WOODWARD GOVERNOR ASSEMBLY--Type 2
Part of 4L3700 Woodward Governor Group shown on Page 300C
GOVERNOR GP
4L-3700 GOVERNOR GP
4L3700 WOODWARD GOVERNOR GROUP--Type 2
FOR USE WITH ALL ARRANGEMENTS COVERED IN THIS PARTS BOOK EXCEPTING
4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
GOVERNOR GP
4L-3700 GOVERNOR GP
4L3700 WOODWARD GOVERNOR GROUP--Type 3
FOR USE WITH ALL ARRANGEMENTS COVERED IN THIS PARTS BOOK EXCEPTING
4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
4L3702 GOVERNOR parts are shown on Page 300D
GOVERNOR GP-WOODWARD
8L-8919 GOVERNOR GP-WOODWARD
8L8919 WOODWARD GOVERNOR GROUP
Part of 5H4281 Woodward Governor shown on Page 300A
GOVERNOR
3L-8244 GOVERNOR
3L8244 GOVERNOR--Part 1 of 2
Part of 5H4281 Woodward Governor Group shown on Page 300
GOVERNOR
3L-8244 GOVERNOR
3L8244 GOVERNOR--Part 2 of 2
Part of 5H4281 Woodward Governor Group shown on Page 300
MOUNTING AND DRIVE GROUP
4L-1769 MOUNTING AND DRIVE GROUP
4L1769 MOUNTING AND DRIVE GROUP--Type 1
Part of 4L1770 Woodward Governor Arrangement listed on Page 300
MOUNTING AND DRIVE GROUP
4L-1769 MOUNTING AND DRIVE GROUP
4L1769 MOUNTING AND DRIVE GROUP--Type 2
Part of 4L1770 Woodward Governor Arrangement listed on Page 300
MOUNTING AND DRIVE GROUP
4L-1769 MOUNTING AND DRIVE GROUP
4L1769 MOUNTING AND DRIVE GROUP--Type 3
Part of 4L1770 Woodward Governor Arrangement listed on Page 300
4L7648 Manual Shut-Off parts are shown on Pages 204 and 204A
MOUNTING AND DRIVE GROUP
4L-1769 MOUNTING AND DRIVE GROUP
4L1769 MOUNTING AND DRIVE GROUP--Type 4
Part of 4L1770 Woodward Governor Arrangement listed on Page 300
4L7648 Manual Shut-Off parts are shown on Pages 204 and 204A
4L-6484 GOVERNOR CONVERSION GROUP
4L6484 GOVERNOR CONVERSION GROUP--3% Regulation at 900 R.P.M.
4L6482 GOVERNOR CONVERSION GROUP--3% Regulation at 1000 R.P.M.
4L4160 GOVERNOR CONVERSION GROUP--3% Regulation at 1200 R.P.M.
4L6478 GOVERNOR CONVERSION GROUP--10% Regulation at 750 to 900 R.P.M.
4L6476 GOVERNOR CONVERSION GROUP--10% Regulation at 950 to 1050 R.P.M.
4L6474 GOVERNOR CONVERSION GROUP--10% Regulation at 1100 R.P.M.
3L5831 GOVERNOR CONVERSION GROUP--10% Regulation at 1150 to 1200 R.P.M.
4L2659 GOVERNOR CONVERSION GROUP--10% Regulation at 1200 R.P.M.
4L-6482 GOVERNOR CONVERSION GROUP
4L6484 GOVERNOR CONVERSION GROUP--3% Regulation at 900 R.P.M.
4L6482 GOVERNOR CONVERSION GROUP--3% Regulation at 1000 R.P.M.
4L4160 GOVERNOR CONVERSION GROUP--3% Regulation at 1200 R.P.M.
4L6478 GOVERNOR CONVERSION GROUP--10% Regulation at 750 to 900 R.P.M.
4L6476 GOVERNOR CONVERSION GROUP--10% Regulation at 950 to 1050 R.P.M.
4L6474 GOVERNOR CONVERSION GROUP--10% Regulation at 1100 R.P.M.
3L5831 GOVERNOR CONVERSION GROUP--10% Regulation at 1150 to 1200 R.P.M.
4L2659 GOVERNOR CONVERSION GROUP--10% Regulation at 1200 R.P.M.
4L-4160 GOVERNOR CONVERSION GROUP
4L6484 GOVERNOR CONVERSION GROUP--3% Regulation at 900 R.P.M.
4L6482 GOVERNOR CONVERSION GROUP--3% Regulation at 1000 R.P.M.
4L4160 GOVERNOR CONVERSION GROUP--3% Regulation at 1200 R.P.M.
4L6478 GOVERNOR CONVERSION GROUP--10% Regulation at 750 to 900 R.P.M.
4L6476 GOVERNOR CONVERSION GROUP--10% Regulation at 950 to 1050 R.P.M.
4L6474 GOVERNOR CONVERSION GROUP--10% Regulation at 1100 R.P.M.
3L5831 GOVERNOR CONVERSION GROUP--10% Regulation at 1150 to 1200 R.P.M.
4L2659 GOVERNOR CONVERSION GROUP--10% Regulation at 1200 R.P.M.
4L-6478 GOVERNOR CONVERSION GROUP
4L6484 GOVERNOR CONVERSION GROUP--3% Regulation at 900 R.P.M.
4L6482 GOVERNOR CONVERSION GROUP--3% Regulation at 1000 R.P.M.
4L4160 GOVERNOR CONVERSION GROUP--3% Regulation at 1200 R.P.M.
4L6478 GOVERNOR CONVERSION GROUP--10% Regulation at 750 to 900 R.P.M.
4L6476 GOVERNOR CONVERSION GROUP--10% Regulation at 950 to 1050 R.P.M.
4L6474 GOVERNOR CONVERSION GROUP--10% Regulation at 1100 R.P.M.
3L5831 GOVERNOR CONVERSION GROUP--10% Regulation at 1150 to 1200 R.P.M.
4L2659 GOVERNOR CONVERSION GROUP--10% Regulation at 1200 R.P.M.
4L-6476 GOVERNOR CONVERSION GROUP
4L6484 GOVERNOR CONVERSION GROUP--3% Regulation at 900 R.P.M.
4L6482 GOVERNOR CONVERSION GROUP--3% Regulation at 1000 R.P.M.
4L4160 GOVERNOR CONVERSION GROUP--3% Regulation at 1200 R.P.M.
4L6478 GOVERNOR CONVERSION GROUP--10% Regulation at 750 to 900 R.P.M.
4L6476 GOVERNOR CONVERSION GROUP--10% Regulation at 950 to 1050 R.P.M.
4L6474 GOVERNOR CONVERSION GROUP--10% Regulation at 1100 R.P.M.
3L5831 GOVERNOR CONVERSION GROUP--10% Regulation at 1150 to 1200 R.P.M.
4L2659 GOVERNOR CONVERSION GROUP--10% Regulation at 1200 R.P.M.
4L-6474 GOVERNOR CONVERSION GROUP
4L6484 GOVERNOR CONVERSION GROUP--3% Regulation at 900 R.P.M.
4L6482 GOVERNOR CONVERSION GROUP--3% Regulation at 1000 R.P.M.
4L4160 GOVERNOR CONVERSION GROUP--3% Regulation at 1200 R.P.M.
4L6478 GOVERNOR CONVERSION GROUP--10% Regulation at 750 to 900 R.P.M.
4L6476 GOVERNOR CONVERSION GROUP--10% Regulation at 950 to 1050 R.P.M.
4L6474 GOVERNOR CONVERSION GROUP--10% Regulation at 1100 R.P.M.
3L5831 GOVERNOR CONVERSION GROUP--10% Regulation at 1150 to 1200 R.P.M.
4L2659 GOVERNOR CONVERSION GROUP--10% Regulation at 1200 R.P.M.
3L-5831 GOVERNOR CONVERSION GROUP
4L6484 GOVERNOR CONVERSION GROUP--3% Regulation at 900 R.P.M.
4L6482 GOVERNOR CONVERSION GROUP--3% Regulation at 1000 R.P.M.
4L4160 GOVERNOR CONVERSION GROUP--3% Regulation at 1200 R.P.M.
4L6478 GOVERNOR CONVERSION GROUP--10% Regulation at 750 to 900 R.P.M.
4L6476 GOVERNOR CONVERSION GROUP--10% Regulation at 950 to 1050 R.P.M.
4L6474 GOVERNOR CONVERSION GROUP--10% Regulation at 1100 R.P.M.
3L5831 GOVERNOR CONVERSION GROUP--10% Regulation at 1150 to 1200 R.P.M.
4L2659 GOVERNOR CONVERSION GROUP--10% Regulation at 1200 R.P.M.
GOVERNOR CONVERSION GROUP
4L-2659 GOVERNOR CONVERSION GROUP
4L6484 GOVERNOR CONVERSION GROUP--3% Regulation at 900 R.P.M.
4L6482 GOVERNOR CONVERSION GROUP--3% Regulation at 1000 R.P.M.
4L4160 GOVERNOR CONVERSION GROUP--3% Regulation at 1200 R.P.M.
4L6478 GOVERNOR CONVERSION GROUP--10% Regulation at 750 to 900 R.P.M.
4L6476 GOVERNOR CONVERSION GROUP--10% Regulation at 950 to 1050 R.P.M.
4L6474 GOVERNOR CONVERSION GROUP--10% Regulation at 1100 R.P.M.
3L5831 GOVERNOR CONVERSION GROUP--10% Regulation at 1150 to 1200 R.P.M.
4L2659 GOVERNOR CONVERSION GROUP--10% Regulation at 1200 R.P.M.
GOVERNOR CONVERSION GROUP
4L-6865 GOVERNOR CONVERSION GROUP
4L6865 GOVERNOR CONVERSION GROUP--10% Regulation at 1300 R.P.M.
LINES GP-FUEL
FUEL INJECTION VALVES AND LINES
FUEL INJECTION VALVES AND LINES
FUEL INJECTION VALVES AND LINES
Serial No. 31B2478 to 31B3701 inclusive
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
FUEL INJECTION VALVES AND LINES
FUEL INJECTION VALVES AND LINES
FUEL INJECTION VALVES AND LINES
Effective with Serial No. 31B3702
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
FLEXIBLE FUEL LINES GROUP
4H-1904 FLEXIBLE FUEL LINES GROUP
4H1904 FLEXIBLE FUEL LINES GROUP
Also part of 1L6560, 3L7295 and 3L7306 Generator Installation Group
listed on Page 360
PUMP GP-FUEL INJECTION
FUEL INJECTION VALVES AND LINES
FUEL INJECTION VALVES AND LINES
FUEL INJECTION VALVES AND LINES
Serial No. 31B2478 to 31B3701 inclusive
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
FUEL INJECTION VALVES AND LINES
FUEL INJECTION VALVES AND LINES
FUEL INJECTION VALVES AND LINES
Effective with Serial No. 31B3702
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
PUMP GP-FUEL PRIMING
FUEL PRIMING PUMP GROUP
3L-8466 FUEL PRIMING PUMP GROUP
3L8466 FUEL PRIMING PUMP GROUP--Type 1
Part of 5L5572, 3L8476, 4L1262, 5L5560 and 5L8042 Arrangements and Hydraulic
Starting System shown on Pages 175, 176, 189, 196 and 204A
FUEL PRIMING PUMP ASSEMBLY
3L-8466 FUEL PRIMING PUMP ASSEMBLY
3L8466 FUEL PRIMING PUMP ASSEMBLY--Type 2
Part of 5L5572, 3L8476, 4L1262, 5L5560 and 5L8042 Arrangements and Hydraulic
Starting System shown on Pages 175, 176, 189, 196 and 204A
PUMP AS-FUEL PRIMING
2S-0308 PUMP AS-FUEL PRIMING
2S308 FUEL PRIMING PUMP ASSEMBLY
Part of 3L8466 Fuel Priming Pump Assembly
PUMP GP-FUEL TRANSFER
FUEL TRANSFER PUMP ASSEMBLY
5H-2686 FUEL TRANSFER PUMP ASSEMBLY
5H2686 FUEL TRANSFER PUMP ASSEMBLY
Serial No. 31B2478 to 31B3172 inclusive
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
FUEL TRANSFER PUMP ASSEMBLY
5L-2956 FUEL TRANSFER PUMP ASSEMBLY
5L2956 FUEL TRANSFER PUMP ASSEMBLY
Serial No. 31B3173 to 31B3679 inclusive
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
FUEL TRANSFER PUMP ASSEMBLY
5L-2956 FUEL TRANSFER PUMP ASSEMBLY
5L2956 FUEL TRANSFER PUMP ASSEMBLY
Serial No. 31B3680-Up
Part of 4L1109 Naturally Aspirated Engine Arrangement
FUEL PUMP HOUSING GROUP
8H-4716 FUEL PUMP HOUSING GROUP
8H4716 FUEL PUMP HOUSING GROUP
Serial No. 31B2478 to 31B3090 inclusive
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
FUEL PUMP HOUSING
FUEL PUMP HOUSING
FUEL PUMP HOUSING
Serial No. 31B3091 to 31B3412 inclusive
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
FUEL PUMP HOUSING
FUEL PUMP HOUSING
FUEL PUMP HOUSING
Serial No. 31B3413 to 31B3701 inclusive
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
FUEL PUMP HOUSING
2S-2500 FUEL PUMP HOUSING
FUEL PUMP HOUSING (2S2500 N/S)
Serial No. 31B3702-Up
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
8H-6138 CRUDE OIL FUEL SYSTEM ARRANGEMENT
8H6138 CRUDE OIL FUEL SYSTEM ARRANGEMENT
PUMP ASSEMBLY
5H-2872 PUMP ASSEMBLY
5H2872 PUMP ASSEMBLY
Part of 8H6138 Crude Oil Fuel System Arrangement
PUMP ASSEMBLY
8M-3136 PUMP ASSEMBLY
8M3136 PUMP ASSEMBLY--6 Assemblies Required
Part of 5H1403 Fuel Pump Housing Group listed on Page 341
REGULATOR GP-GAS PRESSURE
GAS PRESSURE REGULATOR
5L-6452 GAS PRESSURE REGULATOR
5L6452 GAS PRESSURE REGULATOR
Part of Air Cleaner, Carburetor and Aftercoolers shown on Pages 28, 31, 34 and 38
SHUTOFF GP
MANUAL SHUT-OFF GROUP
4L-7648 MANUAL SHUT-OFF GROUP
4L7648 MANUAL SHUT-OFF GROUP--Type 1
Part of 4L3176 Rack Shut-off Solenoid Group and 4L1769 Mounting and
Drive Group shown on Pages 203, 306 and 307
MANUAL SHUT-OFF GROUP
4L-7648 MANUAL SHUT-OFF GROUP
4L7648 MANUAL SHUT-OFF GROUP--Type 2
Part of 4L3176 Solenoid and 4L1769 Mounting shown on Pages 203, 306 and 307
MANUAL AND REMOTE SHUT-OFF GROUP
4L-4503 MANUAL AND REMOTE SHUT-OFF GROUP
4L4503 MANUAL AND REMOTE SHUT-OFF GROUP
Part of 3L5822 Safety Control Shut-Off Group
TANK GP-FUEL
BASE AND FUEL TANK GROUP
3L-8491 BASE AND FUEL TANK GROUP
3L8491 BASE AND FUEL TANK GROUP--Extended--180 U. S. Gallons
FOR USE WITH 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
For use with Shaft and Pillow Block, without Dry Oil Pan
3L8402 Primary Fuel Filter Group parts are shown on Page 347
BASE AND FUEL TANK GROUP
2L-8628 BASE AND FUEL TANK GROUP
2L8628 BASE AND FUEL TANK GROUP--140 U. S. Gallons
FOR USE WITH 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
For use with Diesel Electric Set, without Deep Oil Pan
3L8402 Primary Fuel Filter Group parts are shown on Page 347
BASE AND FUEL TANK GROUP
2L-8753 BASE AND FUEL TANK GROUP
2L8753 BASE AND FUEL TANK GROUP--Short--106 U.S. Gallons
FOR USE WITH 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
For use with Enclosed Clutch, without Deep Oil Pan
TORQUE CONTROL GP
TORQUE SPRING GROUP
4L-0584 TORQUE SPRING GROUP
4L584 TORQUE SPRING GROUP
Serial No. 31B2478 to 31B3090 inclusive
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
Refer also to Page 309 for special parts
TORQUE SPRING
TORQUE SPRING
TORQUE SPRING
Effective with Serial No. 31B3091
PART OF 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
Refer also to Page 309 for special parts
TORQUE SPRING GROUP
3L-0761 TORQUE SPRING GROUP
3L761 TORQUE SPRING GROUP
FOR USE WITH 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT
TORQUE SPRING GROUP
3L-8613 TORQUE SPRING GROUP
3L8613 TORQUE SPRING GROUP
FOR USE WITH 4L1109 NATURALLY ASPIRATED ENGINE ARRANGEMENT

Information:

(For parts list, see above)

Engine News
New Carburetor Assembly For G300 Series Engines{1266}
1998/10/01
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Engine News
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Engine News
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Improved Fuel Priming Pump Used
1987/05/01
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Service Magazine
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Special Instruction
Test Sequence for Capsule Type Fuel Nozzles{0782}
Test Sequence for Capsule Type Fuel Nozzles{0782}
Installation of Natural Gas Flow Meter on Certain Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Natural Gas and Dynamic Gas Blended Engines {1000, 1250, 1901, 7606, 7620}
Installation of Natural Gas Flow Meter on Certain Caterpillar® and Non-Caterpillar Natural Gas and Dynamic Gas Blended Engines {1000, 1250, 1901, 7606, 7620}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
New Adapter Group For Use With Fuel Injection Test Bench
1977/06/22
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
New Adapter Group For Use With Fuel Injection Test Bench{0652}
1977/06/13
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Engine News
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Special Instruction
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Engine News
Fuel Heaters Are Now Available For Field Installation
1980/01/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Explanation Of Differences In Timing Advance Information
1981/08/26
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers
1986/03/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Changes Have Been Made To 0T Microfiche (Fuel Setting And Related Information)
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
New Adapter Group For Use With Fuel Injection Test Bench
1977/06/22
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Three Element Speed Switch Replaces Dual Element Speed Switch{7418,7411,7410,7421}
1986/04/21
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
New Adapter Group For Use With Fuel Injection Test Bench{0652}
1977/06/13
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Priming Pump Used{1258}
1987/04/20
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
New Adapter Group For Use With Fuel Injection Test Bench{0652}
1977/06/13
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Special Instruction
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Test Sequence for Capsule Type Fuel Nozzles{0782}
Test Sequence for Capsule Type Fuel Nozzles{0782}
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
New Adapter Group For Use With Fuel Injection Test Bench
1977/06/22
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Use Of 6V-4180 Timing Fixture Group To Check Off-Engine Timing Dimension Setting{1251, 0653}
Use Of 6V-4180 Timing Fixture Group To Check Off-Engine Timing Dimension Setting{1251, 0653}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
New Adapter Group For Use With Fuel Injection Test Bench{0652}
1977/06/13
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Engine News
Improved Fuel Priming Pump Used
1987/05/01
Special Instruction
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Service Magazine
Improved Fuel Priming Pump Used{1258}
1987/04/20
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Fuel Priming Pump Used{1258}
1987/04/20
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Service Magazine
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Service Magazine
Three Element Speed Switch Replaces Dual Element Speed Switch{7418,7411,7410,7421}
1986/04/21
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Engine News
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/12
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
New Service Centers For 6V3100 Engine Timing Indicator Group
1983/10/26
Fuel Sulfur Analyzer Available
1986/01/01
New Engine Timing Indicator Group Available
1986/07/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
New Adapter Group For Use With Fuel Injection Test Bench
1977/06/22
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Using The 5P-4150 Nozzle Testing Group{0782}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Using The 6V4950 Injection Line Speed Pickup Group{0782}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Fabricated Extension Prevents Fuel &quot;Splash&quot; During Injection Valve Testing{0650,1254}
1977/10/17
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28
4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Special Instruction
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Magazine
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08

Truck sale:

1975 CAT D342
USD $9,900 
1975 CAT D342

Empire Power Systems
PHOENIX, Arizona
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.