AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CONNECTING ROD AND PISTON--6 REQUIRED NOTE: 3S4045 PISTON AND LINER GROUP, CONSISTING OF: 1-PISTON ASSEMBLY, 1-LINER AND 3-SEAL, IS AVAILABLE 988


BASIC ENGINE
PISTON & ROD GP
FLYWHEEL GP
CAMSHAFT GP
DRIVE GP-ACCESSORY
FUEL SYSTEM
CONTROL GP-GOVERNOR
GOVERNOR GP

WHEEL LOADER 988 WHEEL LOADER 87A
 988 TRAXCAVATOR 87A00001-00530 (MACHINE) UE035422 988 87A   (1965)

BASIC ENGINE

PISTON & ROD GP
CONNECTING ROD AND PISTON
CONNECTING ROD AND PISTON
CONNECTING ROD AND PISTON
CONNECTING ROD AND PISTON
 

#UE0354220050
 

CONNECTING ROD AND PISTON

CONNECTING ROD AND PISTON--6 REQUIRED
NOTE: 3S4045 PISTON AND LINER GROUP, CONSISTING OF:
1-PISTON ASSEMBLY, 1-LINER AND 3-SEAL, IS AVAILABLE
c76947 UE035422
None CONNECTING ROD AND PISTON Parts scheme
  For full view, you need register

Parts for your 988 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1S-9421 [1] RING  
    (PART OF PISTON ASSEM.3S4044)
  3S-4044 [1] PISTON ASSEM.  
  4M-9218 [1] ROD ASSEM.  
  3S-4043 [1] PISTON RING GROUP  
    (CONSISTS OF COMPLETE SET OF RINGS FOR ONE PISTON)
  1M-6105 [2] BOLT  
    (PART OF ROD ASSEM.4M9218)
  8M-3081 [2] NUT  
    (PART OF ROD ASSEM.4M9218)
  1S-9420 [1] RING  
    (PART OF PISTON ASSEM. 3S4044)
  1M-7214 [1] RING  
    (PART OF PISTON ASSEM. 3S4044)
  3F-8513 [2] RETAINER  
  1M-6101 [1] PIN  
  1M-6107 [1] BEARING  
    (PART OF ROD ASSEM. 4M9218)
  4M-8196 [1] BEARING  
    (STANDARD)
  7M-3677 [1] BEARING  
    (.025" UNDERSIZED)
  7M-3529 [1] BEARING  
    (.050"UNDERSIZED)
  1S-1083 [2] COTTER PIN  
    (PART OF ROD ASSEM. 4M9218)
 

#UE0354220051
 

FLYWHEEL

FLYWHEEL
FOR USE WITH GASOLINE STARTING ENGINE
REFER ALSO TO PAGE 173 FOR SPECIAL PARTS
c86540 UE035422
None FLYWHEEL Parts scheme
  For full view, you need register

Parts for your 988 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9M-3611 [1] FLYWHEEL ASSEM.  
  8F-3152 [9] BOLT  
  8M-2984 [1] LOCK  
  1S-6777 [1] GEAR (114 TEETH)  
    (PART OF FLYWHEEL ASSEM. 9M3611)
 

#UE0354220052
 

CAMSHAFT

CAMSHAFT
Serial No. 87A1 to 87A288 and 87A301 inclusive
c68590 UE035422
None CAMSHAFT Parts scheme
  For full view, you need register

Parts for your 988 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5M-3705 [6] SPRING  
  7M-6854 [6] ARM  
  5B-9079 [6] NUT  
  5M-3704 [6] SCREW  
  7M-9800 [1] SHAFT  
  5M-3703 [1] CAMSHAFT ASSEM.  
  5M-3604 [1] BLOCK ASSEM.  
  1F-1006 [1] DOWEL  
    (PART OF BLOCK ASSEM.5M3604)
  9F-7022 [1] BOLT  
  7F-2836 [1] LOCK  
  1A-5183 [1] BOLT  
  0L-0364 [1] LOCK  
  7M-7136 [1] PLATE  
  0S-0509 [2] BOLT  
  4M-8210 [1] LOCK  
  5M-3603 [2] BEARING  
    (PART OF BLOCK ASSEM.5M3604)
  5B-9603 [1] BOLT  
  0L-0364 [1] LOCK  
  [1] COLLAR  
    (PART OF CAMSHAFT ASSEM. 7M3845)
  0T-0055 [7] BOLT  
  0L-0364 [7] LOCK  
  7M-3845 [1] CAMSHAFT ASSEM.  
  7B-0471 [1] PIN  
  7M-7071 [1] STOP  
  9H-4621 [1] PLUNGER  
  [1] SPRING  
  5M-3686 [1] BLOCK  
  0S-1571 [1] BOLT  
  0L-0364 [1] LOCK  
  1A-5183 [6] BOLT  
  0L-0364 [6] LOCK  
  5M-3561 [6] BLOCK ASSEM.  
  [1] GEAR  
    (PART OF CAMSHAFT ASSEM. 5M3703)
  4B-4280 [6] WASHER  
  5M-3672 [6] SHAFT  
    (1 IN EACH BLOCK ASSEM.5M3561)
  3B-4617 [6] COTTER PIN  
  5M-3594 [1] TUBE ASSEM.  
  0S-1591 [6] BOLT  
  0L-0364 [6] LOCK  
  5M-3560 [12] BEARING  
    (2 IN EACH BLOCK ASSEM.5M3561)
  [1] GEAR  
    (PART OF CAMSHAFT ASSEM. 7M3845)
 

#UE0354220053
 

4M-0298: CAMSHAFT

CAMSHAFT (4M298 N/S)
Serial No. 87A289 to 87A300 and 87A302-Up
c110816 UE035422
4M0298 CAMSHAFT Parts scheme
  For full view, you need register

Parts for your 988 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5M-3705 [6] SPRING  
  7M-6854 [6] ARM  
  5B-9079 [6] NUT  
  5M-3704 [6] SCREW  
  7M-9800 [1] SHAFT  
  5M-3703 [1] CAMSHAFT ASSEM.  
  2S-1859 [1] BLOCK ASSEM.  
  1F-1006 [1] DOWEL  
    (PART OF BLOCK ASSEM. 2S1859)
  9F-7022 [1] BOLT  
  7F-2836 [1] LOCK  
  1A-5183 [1] BOLT  
  0L-0364 [1] LOCK  
  7M-7136 [1] PLATE  
  0S-0509 [2] BOLT  
  4M-8210 [1] LOCK  
  5M-3603 [2] BEARING  
    (PART OF BLOCK ASSEM. 2S1859)
  5B-9603 [1] BOLT  
  0L-0364 [1] LOCK  
  [1] COLLAR  
    (PART OF CAMSHAFT ASSEM. 7M3845)
  0T-0055 [7] BOLT  
  0L-0364 [7] LOCK  
  7M-3845 [1] CAMSHAFT ASSEM.  
  7B-0471 [1] PIN  
  7M-7071 [1] STOP  
  2S-4628 [1] PLUNGER  
  9S-1347 [1] SPRING  
  2S-4627 [1] BLOCK  
  0S-1571 [1] BOLT  
  0L-0364 [1] LOCK  
  1A-5183 [6] BOLT  
  0L-0364 [6] LOCK  
  2S-1861 [6] BLOCK ASSEM.  
  [1] GEAR  
    (PART OF CAMSHAFT ASSEM. 5M3703)
  4B-4280 [6] WASHER  
  5M-3672 [6] SHAFT  
    (1 IN EACH BLOCK ASSEM.2S1861)
  3B-4617 [6] COTTER PIN  
  5M-3594 [1] TUBE ASSEM.  
  0S-1591 [6] BOLT  
  0L-0364 [6] LOCK  
  5M-3560 [12] BEARING  
    (2 IN EACH BLOCK ASSEM.2S1861)
  [1] GEAR  
    (PART OF CAMSHAFT ASSEM. 7M3845)
 

#UE0354220054
 

CAMSHAFT DRIVE

CAMSHAFT DRIVE
c91412 UE035422
None CAMSHAFT DRIVE Parts scheme
  For full view, you need register

Parts for your 988 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5M-1902 [1] GASKET  
  5M-2609 [1] CAGE ASSEM.  
  7M-3846 [1] SHAFT  
  2S-5210 [1] BEARING  
    (PART OF CAGE ASSEM. 5M2609)
  2M-8513 [1] WASHER  
  8M-2677 [1] SHAFT  
  1B-4203 [6] NUT  
  0L-0364 [6] LOCK  
  8M-7140 [1] GEAR ASSEM.  
    (40 TEETH)
  2H-5558 [1] DOWEL  
    (PART OF GEAR ASSEM. 8M7140)
  1M-9695 [1] WASHER  
  0S-1594 [3] BOLT  
  5M-9421 [1] LOCK  
  1B-4203 [3] NUT  
  5M-9419 [1] LOCK  
  2S-5211 [1] BEARING  
    (PART OF GEAR ASSEM. 8M7143)
  8M-7143 [1] GEAR ASSEM.  
    (40 TEETH)
 

#UE0354220055
 

HYDRAULIC PUMP DRIVE

HYDRAULIC PUMP DRIVE
c76942 UE035422
None HYDRAULIC PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 988 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1M-9711 [1] GASKET  
  8M-5845 [1] GEAR (60 TEETH)  
  6F-0698 [1] DOWEL  
  0S-1594 [3] BOLT  
  5M-9420 [1] LOCK  
  4M-9132 [1] WASHER  
  0S-1590 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  8M-7142 [1] GEAR ASSEM.  
    (72 AND 24 TEETH)
  8M-6589 [1] CAGE ASSEM.  
  9F-2247 [2] PLUG (PIPE)  
    (PART OF CAGE ASSEM. 8M6589)
  5F-3106 [1] SEAL  
  5M-0596 [1] COVER  
  7M-0272 [1] BEARING  
    (PART OF CAGE ASSEM. 8M6589)
  0S-1566 [2] BOLT  
  3B-4510 [2] LOCKWASHER  
  0S-1591 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  5M-6214 [1] PLUG  
  1B-4203 [6] NUT  
  3B-4506 [6] LOCKWASHER  
  7M-8361 [2] BEARING  
    (PART OF GEAR ASSEM. 8M7142)
  7M-8347 [1] WASHER  
  0S-1594 [3] BOLT  
  5M-9418 [1] LOCK  
 

#UE0354220056
 

GOVERNOR CONTROL

GOVERNOR CONTROL
c76604 UE035422
None GOVERNOR CONTROL Parts scheme
  For full view, you need register

Parts for your 988 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4K-1915 [1] PEDAL  
  1J-4384 [2] PIN  
  3B-4615 [2] COTTER PIN  
  2M-3598 [1] ROD  
  5B-9079 [1] NUT  
  1A-9252 [1] END  
  3F-1761 [1] SPRING  
  4K-0021 [1] LEVER  
  0S-1588 [1] BOLT  
  9M-4063 [1] LEVER  
  1J-4384 [2] PIN  
  3B-4615 [2] COTTER PIN  
  2K-0400 [2] END  
  5B-9079 [2] NUT  
  7F-9776 [2] BRACKET  
  7F-9777 [1] BEARING  
  4B-2906 [1] PIN  
  0L-1351 [4] BOLT  
  1D-4717 [4] NUT  
  3B-4506 [4] LOCKWASHER  
  4K-2184 [1] SHAFT  
  1B-8704 [2] KEY  
  0S-1588 [1] BOLT  
  4K-2182 [1] LEVER ASSEM.  
  1K-4708 [2] WASHER  
  3B-4617 [2] COTTER PIN  
  3B-1347 [1] BEARING  
    (PART OF LEVER ASSEM. 4K2182)
  4D-8988 [1] ROD  
  1M-1341 [1] END  
  5B-9079 [1] NUT  
    (PARTS OF ROD ASSEM. 4K1144)
  4K-1144 [1] ROD ASSEM.  
  2S-2174 [1] LEVER  
    (MOUNTED ON GOVERNOR)
  5F-4475 [1] BOLT  
  1B-4201 [1] NUT  
  1A-9252 [1] END  
  5B-9079 [1] NUT  
  1J-4384 [2] PIN  
  3B-4615 [2] COTTER PIN  
  9M-4065 [1] LEVER ASSEM.  
  3B-1347 [1] BEARING  
    (PART OF LEVER ASSEM. 9M4065)
  1J-4384 [2] PIN  
  3B-4615 [2] COTTER PIN  
  1M-1341 [2] END  
  5B-9079 [2] NUT  
    (PARTS OF ROD ASSEM. 4K1125)
  4K-1125 [1] ROD ASSEM.  
 

#UE0354220057
 

9M-3681: GOVERNOR GROUP

9M3681 GOVERNOR GROUP--With Rack Limiter--Part 1 of 3
Serial No. 87A1 to 87A168 inclusive
ADDITIONAL PARTS ARE SHOWN ON PAGES 40 AND 40A
c75108 UE035422
9M3681 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 988 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-0292 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  9M-9187 [1] PLUNGER  
  8B-3410 [1] GASKET  
  1S-9312 [1] SPRING  
  9M-4690 [1] PLUG  
  1K-6977 [1] SCREW  
  5B-5492 [1] WASHER  
  1B-9919 [1] SEAL  
  9M-6145 [1] SHAFT  
  9M-6090 [1] COUPLING  
  9M-6146 [1] SUPPORT  
  9H-3196 [1] SCREW  
  3B-4504 [1] LOCKWASHER  
  4B-1321 [5] SCREW  
  3B-4504 [5] LOCKWASHER  
  2B-4602 [1] PLUG  
  0S-1594 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
  5H-2573 [1] BOLT  
  6F-7062 [1] WASHER  
  5H-9990 [1] BOLT  
  1B-4218 [1] WASHER  
  1A-2029 [4] BOLT  
  1B-4218 [4] WASHER  
  6F-5282 [1] BOLT  
  3B-4508 [1] LOCKWASHER  
  0L-1143 [1] BOLT  
  3B-4506 [1] LOCKWASHER  
 

#UE0354220058
 

9M-3681: GOVERNOR GROUP

9M3681 GOVERNOR GROUP--With Rack Limiter--Part 2 of 3
Serial No. 87A1 to 87A168 inclusive
ADDITIONAL PARTS ARE SHOWN ON PAGES 39 AND 40A
c73449 UE035422
9M3681 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 988 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5H-9895 [1] SHAFT  
  1A-2029 [1] BOLT (1.125" LONG)  
  3B-4506 [1] LOCKWASHER  
  0S-1588 [1] BOLT (1.25" LONG)  
  1B-4218 [1] WASHER  
  5M-9717 [1] LEVER ASSEM.  
  2H-4677 [1] DOWEL  
    (PART OF LEVER ASSEM. 5M9717)
  8M-0799 [1] CAGE  
  6B-0924 [1] BEARING  
  4F-1520 [1] SLEEVE ASSEM.  
  2H-2040 [2] ROLLER  
  4F-2954 [2] PIN  
    (1 OF EACH IN EACH WEIGHT ASSEM. 8H1977)
  2M-8179 [1] GEAR (24 TEETH)  
  4H-9699 [1] KEY  
  4F-1515 [1] BEARING  
  1H-2745 [4] BUSHING  
    (2 IN EACH WEIGHT ASSEM. 8H1977)
  3H-9676 [2] PIN  
  3H-9675 [2] PIN (SPRING)  
  6H-3259 [1] SPRING  
  8H-1977 [2] WEIGHT ASSEM.  
  1B-8706 [1] KEY  
  6H-3261 [1] HUB  
  5B-1484 [1] NUT  
  7B-4617 [1] LOCK  
  6H-3262 [1] WASHER  
  4B-4283 [1] WASHER  
  6H-3257 [1] DOWEL  
  6H-3258 [1] GEAR (40 TEETH)  
  8M-2989 [1] COVER  
  3B-4604 [1] COTTER PIN  
  1A-8285 [1] NUT  
  0L-1013 [1] NUT  
  8M-7618 [1] RETAINER  
  8M-3274 [1] PLATE  
  8M-2434 [1] HOUSING  
  8M-9149 [1] DIAPHRAGM  
  8M-3273 [1] PLATE  
  8M-3275 [1] SPRING  
  5H-7295 [1] GASKET  
  8M-7633 [1] SHAFT  
  5M-9718 [1] BOLT  
  5H-1212 [1] COVER ASSEM.  
  4F-4541 [1] BEARING  
    (PART OF COVER ASSEM. 5H1212)
  9M-4606 [1] SPINDLE  
  8M-0599 [1] SPRING  
  9H-9914 [1] SPRING  
  5H-2677 [1] GASKET  
  8M-0600 [1] PISTON ASSEM.  
  5H-1177 [1] CYLINDER  
 

#UE0354220059
 

9M-3681: GOVERNOR GROUP

9M3681 GOVERNOR GROUP--With Rack Limiter--Part 3 of 3
Serial No. 87A1 to 87A168 inclusive
ADDITIONAL PARTS ARE SHOWN ON PAGES 39 AND 40
c75261 UE035422
9M3681 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 988 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2A-3348 [1] PIN  
    (PART OF LEVER ASSEM. 9M8795)
  5H-1124 [1] LINK ASSEM.  
  5M-9711 [1] PIN  
    (PART OF LEVER ASSEM. 5M9716)
  5M-9708 [1] SPRING  
  5M-9712 [1] PIN  
  9F-3154 [1] PIN  
    (PARTS OF LEVER ASSEM. 5M9721)
  5M-9709 [1] RETAINER  
  7M-7446 [1] SPRING  
    (PARTS OF LEVER ASSEM. 5M9716)
  5M-9716 [1] LEVER ASSEM.  
  6F-5559 [1] SEAL  
  5M-9743 [1] PIN  
  5M-9710 [1] PIN  
    (PART OF LEVER ASSEM. 5M9716)
  1H-2918 [2] BLOCK  
  2H-4677 [1] DOWEL  
  4H-9586 [2] BUSHING  
    (PARTS OF LEVER ASSEM. 5M9721)
  5M-9721 [1] LEVER ASSEM.  
  3H-9675 [1] PIN  
    (PART OF LEVER ASSEM. 5M9721)
  6F-5926 [1] NUT  
  5H-9555 [1] SCREW  
  5H-1230 [1] GASKET  
  0S-1588 [1] BOLT (1.25" LONG)  
  1B-4218 [1] WASHER  
  0S-1594 [2] BOLT (1" LONG)  
  3B-4506 [2] LOCKWASHER  
  5H-9556 [1] LOCK  
  9M-9185 [1] HOUSING ASSEM.  
  9F-2247 [3] PLUG (PIPE)  
    (PART OF HOUSING ASSEM. 9M9185)
  9F-1594 [1] SHAFT  
  5H-8285 [1] ROLLER  
  3H-8728 [1] PIN  
    (PARTS OF LEVER ASSEM. 3H8727)
  6H-6918 [1] PLUNGER  
  4M-4153 [1] GUIDE  
  8F-5874 [1] WASHER  
  8B-5375 [1] RETAINER  
  3H-4760 [1] GUIDE  
  5H-9589 [1] SCREW  
  1B-4202 [1] NUT  
  3H-1118 [1] PIN (SPRING)  
    (PARTS OF HOUSING ASSEM. 9M9185)
  9M-8720 [1] BOLT  
  3H-8727 [1] LEVER ASSEM.  
  4F-9503 [1] SPRING  
  9F-7882 [1] PIN  
  4M-5366 [1] SCREW  
  9M-9129 [1] COVER  
  9M-9220 [1] GASKET  
  1H-2918 [2] BLOCK  
  9M-8795 [1] LEVER ASSEM.  
  4B-4276 [1] WASHER  
  3B-4607 [1] COTTER PIN  
  3H-0868 [2] DOWEL  
    (PART OF LEVER ASSEM. 9M8795)
  9F-1479 [1] GASKET  
  0S-1618 [4] BOLT  
  5B-5492 [4] WASHER  
 

Information:

Special Instruction
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Magazine
Pistons Which Use Keystone-Type Rings Can Be Installed In Place Of Pistons Which Use Rectangular-Type Rings{1215,1214,1213}
1980/08/04
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Improved Crankshaft Main Bearings And Connecting Rod Bearings With Higher Strength Aluminum Alloy{1203,1219,1230}
1977/11/07
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Guidelines for Inspecting Pistons {1214}
2006/01/02

Caterpillar Parts SIS Catalog 988 :

CRANKSHAFT BEARING REPLACEMENT
CRANKSHAFT BEARING REPLACEMENT
REPLACEMENT CRANKSHAFT GEAR GROUP
4S-9643 REPLACEMENT CRANKSHAFT GEAR GROUP
GASKET KITS
DRIVE PULLEY AND DAMPER
DRIVE PULLEY AND DAMPER
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT
4M-4193 CRANKSHAFT
CYLINDER BLOCK ASSEMBLY
2S-1803 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK AND COVERS
FLYWHEEL
FLYWHEEL
CAMSHAFT
CAMSHAFT
CAMSHAFT
4M-0298 CAMSHAFT
CAMSHAFT DRIVE
CAMSHAFT DRIVE
HYDRAULIC PUMP DRIVE
HYDRAULIC PUMP DRIVE
GOVERNOR CONTROL
GOVERNOR CONTROL
GOVERNOR GROUP
9M-3681 GOVERNOR GROUP
9M-3681 GOVERNOR GROUP

Truck sale:

Caterpillar 988, Radlader, Bau-Und Bergbauausrüstung
35.000 
Caterpillar 988, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
MILTON CAT
Caterpillar 988, Radlader, Bau-Und Bergbauausrüstung
35.000 
Caterpillar 988, Radlader, Bau-Und Bergbauausrüstung
- Wheel Loaders
MILTON CAT
Caterpillar 988, Radlader, Bau-Und Bergbauausrüstung
 
Caterpillar 988, Radlader, Bau-Und Bergbauausrüstung
- Wheel Loaders
CGT - COMPAGNIA GENERALE TRATTORI
Italy
Caterpillar 988, Radlader, Bau-Und Bergbauausrüstung
 
Caterpillar 988, Radlader, Bau-Und Bergbauausrüstung
- Wheel Loaders
CGT - COMPAGNIA GENERALE TRATTORI
Italy
Caterpillar BALDE988_STD_CL.UO, Construction
32,000 
Caterpillar BALDE988_STD_CL.UO, Construction
- Petroleum Engines
FINNING CHILE S.A.
Chile
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.