AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CONNECTING ROD AND PISTON--4 REQUIRED SERIAL NO. 82B1 TO 82B157 INCLUSIVE NOTE: 9L2612 PISTON AND LINER GROUP, CONSISTING OF: 1-PISTON ASSEMBLY, 1-LINER AND 2-SEAL, IS AVAILABLE D330B


BASIC ENGINE
PISTON & ROD GP
BALANCER GP
PISTON & ROD GP
CAMSHAFT GP
DRIVE GP-ACCESSORY
FUEL SYSTEM
GOVERNOR GP
OPERATOR STATION
PANEL GP
FUEL SYSTEM
GOVERNOR GP

MARINE ENGINE D330B MARINE ENGINE 82B
 D330 MARINE ENGINE 82B00001-00287 UE035720 D330B 82B   (1964)

BASIC ENGINE

PISTON & ROD GP
CONNECTING ROD AND PISTON
CONNECTING ROD AND PISTON
CONNECTING ROD AND PISTON
9L-2368 CONNECTING ROD AND PISTON
 

#UE0357200040
 

CONNECTING ROD AND PISTON

CONNECTING ROD AND PISTON--4 REQUIRED
SERIAL NO. 82B1 TO 82B157 INCLUSIVE
NOTE: 9L2612 PISTON AND LINER GROUP, CONSISTING OF: 1-PISTON
ASSEMBLY, 1-LINER AND 2-SEAL, IS AVAILABLE
c75512 UE035720
None CONNECTING ROD AND PISTON Parts scheme
  For full view, you need register

Parts for your D330B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4M-8165 [1] RING GROUP  
    (CONSISTS OF COMPLETE SET OF RINGS FOR ONE PISTON)
  5M-4150 [1] RING  
  7M-2128 [1] RING  
  7M-2126 [1] RING  
    (PARTS OF PISTON ASSEM. 2S5567)
  2S-5567 [1] PISTON ASSEM.  
  1S-9543 [2] RETAINER  
  8M-6487 [1] PIN  
  9M-3980 [1] ROD ASSEM.  
  9M-4010 [1] BUSHING  
    (PART OF ROD ASSEM. 9M3980)
  1M-1081 [2] BOLT  
    (PART OF ROD ASSEM. 9M3980)
  7M-7821 [1] BEARING (STANDARD)  
  7M-7826 [1] BEARING  
    (.030" UNDERSIZE)
  4B-6074 [2] NUT  
  1S-0685 [2] COTTER PIN  
    (PARTS OF ROD ASSEM. 9M3980)
 

#UE0357200041
 

6L-3465: ENGINE BALANCER

ENGINE BALANCER (6L3465 N/S)
c75511 UE035720
6L3465 ENGINE BALANCER Parts scheme
  For full view, you need register

Parts for your D330B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-2414 [2] LOCK  
  0S-1594 [4] BOLT  
  1S-6017 [1] SHAFT  
    (RIGHT HAND - 20 TEETH)
  1S-6018 [1] SHAFT  
    (LEFT HAND - 20 TEETH)
  1M-0977 [2] PLATE  
 

#UE0357200042
 

9L-2368: CONNECTING ROD AND PISTON

CONNECTING ROD AND PISTON (9L2368 N/S)--4 Required
Serial No. 82B158-Up
Note: 9L2612 Piston & Liner Group, consisting of: 1--Piston Assembly,
1--Liner and 2--Seal, is available
c133323 UE035720
9L2368 CONNECTING ROD AND PISTON Parts scheme
  For full view, you need register

Parts for your D330B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4M-8165 [1] RING GROUP  
    (CONSISTS OF COMPLETE SET OF RINGS FOR ONE PISTON)
  3S-4027 [1] RING  
  3S-4026 [1] RING  
  7M-2126 [1] RING  
    (PARTS OF PISTON ASSEM. 9L2309)
  9L-2309 [1] PISTON ASSEM.  
  1S-9543 [2] RETAINER  
  8M-6487 [1] PIN  
  9M-3980 [1] ROD ASSEM.  
  9M-4010 [1] BUSHING  
    (Part of 9M3980 Assem.)
  1M-1081 [2] BOLT  
    (Part of 9M3980 Assem.)
  7M-7821 [1] BEARING (Standard)  
  7M-7826 [1] BEARING  
    (.030" Undersize)
  2S-0503 [1] BEARING  
    (.020" Undersize)
  2S-0502 [1] BEARING  
    (.010" Undersize)
  4B-6074 [2] NUT  
    (PART OF ROD ASSEM. 9M3980)
  1S-0685 [2] COTTER PIN  
 

#UE0357200043
 

CAMSHAFT

CAMSHAFT
c75977 UE035720
None CAMSHAFT Parts scheme
  For full view, you need register

Parts for your D330B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8H-4480 [1] GEAR (80 TEETH)  
  0L-1351 [2] BOLT  
  9M-9405 [1] LOCK  
  1B-8736 [1] KEY  
  2S-0531 [1] CAMSHAFT  
  9M-7321 [1] WASHER  
  [1] NUT  
  4M-0380 [1] LOCK  
 

#UE0357200044
 

ACCESSORY DRIVE

ACCESSORY DRIVE
c75433 UE035720
None ACCESSORY DRIVE Parts scheme
  For full view, you need register

Parts for your D330B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1618 [4] BOLT  
  3B-4505 [8] LOCKWASHER  
  1B-9575 [2] BOLT  
  8H-9220 [1] GASKET  
  5M-6213 [1] PLUG  
  8H-9787 [1] COVER  
  8H-9788 [1] GASKET  
  1A-9136 [2] BOLT  
  4H-1966 [1] FITTING  
  4H-2495 [1] NUT  
  4H-2494 [1] SLEEVE  
    (PARTS OF FITTING 4H1966)
  1S-9385 [1] HOUSING ASSEM.  
  2H-1190 [3] DOWEL  
    (PART OF HOUSING ASSEM. 1S9385)
  6L-2413 [1] TUBE  
  4H-0945 [1] FITTING  
  4H-2495 [1] NUT  
  4H-2494 [1] SLEEVE  
    (PARTS OF FITTING 4H945)
  5L-9574 [1] SHAFT ASSEM.  
    (11 TEETH)
  8H-9718 [1] RETAINER  
  0S-1594 [4] BOLT  
  7M-9763 [2] LOCK  
  2B-9373 [1] KEY  
  [1] NUT  
  4M-0380 [1] LOCK  
  9H-4525 [1] DOWEL  
    (PART OF SHAFT ASSEM. 5l9574)
  8H-9789 [1] BEARING  
  8H-9364 [1] GASKET  
  1S-6019 [1] GEAR (80 TEETH)  
  1S-6022 [1] GEAR ASSEM.  
    (64 TEETH)
  2S-2921 [1] WASHER  
  2S-4182 [1] BEARING  
    (PART OF GEAR ASSEM. 1S6022)
  1A-2029 [2] BOLT  
  9M-9405 [1] LOCK  
  7M-8727 [1] SPACER  
 

#UE0357200045
 

6L-1798: FUEL PUMP HOUSING AND GOVERNOR GROUP

6L1798 FUEL PUMP HOUSING AND GOVERNOR GROUP
Serial No. 82B1 to 82B134 inclusive. 6L1557 Governor and
9M6041 Pump Housing parts are shown on Pages 34, 34A & 36B
c96752 UE035720
6L1798 FUEL PUMP HOUSING AND GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your D330B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8M-9064 H [4] SHIM (.064" Thick)  
  8M-9065 H [5] SHIM (.002" Thick)  
  8M-9066 H [4] SHIM (.010" Thick)  
  9M-6523 H [1] SHIM (.030" Thick)  
  4F-7957 H [2] BOLT  
  9M-6292 H [1] LOCK  
  8M-9068 H [1] BAR  
  8M-9062 H [1] RETAINER  
  8M-9140 [1] SPRING  
  8H-9223 [1] GASKET  
  6L-1557 Y [1] GOVERNOR GROUP  
    (See Separate Illustration)
  9M-6041 Y [1] FUEL INJECTION PUMP GROUP  
    (See Separate Illustration)
  0S-1618 [3] BOLT  
  3B-4505 [3] LOCKWASHER  
  2B-2694 [2] BOLT  
  1D-4716 [2] NUT  
  3B-4505 [2] LOCKWASHER  
  H   NOT PART OF FUEL PUMP HOUSING
  Y   SEPARATE ILLUSTRATION
 

#UE0357200046
 

6L-1798: FUEL PUMP HOUSING AND GOVERNOR GROUP

6L1798 FUEL PUMP HOUSING AND GOVERNOR GROUP
Serial No. 82B135 to 82B195 inclusive. 6L7119 Governor and
2S8767 Pump Housing parts are shown on Pages 34B thru 34E & 37
c96753 UE035720
6L1798 FUEL PUMP HOUSING AND GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your D330B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8M-9064 H [4] SHIM (.064" Thick)  
  8M-9065 H [5] SHIM (.002" Thick)  
  8M-9066 H [4] SHIM (.010" Thick)  
  9M-6523 H [1] SHIM (.030" Thick)  
  4F-7957 H [2] BOLT  
  9M-6292 H [1] LOCK  
  8M-9068 H [1] BAR  
  8M-9062 H [1] RETAINER  
  8M-9140 [1] SPRING  
  8H-9223 [1] GASKET  
  6L-7119 Y [1] GOVERNOR GROUP  
    (See Separate Illustration)
  2S-8767 Y [1] FUEL INJECTION PUMP GROUP  
    (See Separate Illustration)
  0S-1618 [3] BOLT  
  3B-4505 [3] LOCKWASHER  
  2B-2694 [2] BOLT  
  1D-4716 [2] NUT  
  3B-4505 [2] LOCKWASHER  
  H   NOT PART OF FUEL PUMP HOUSING
  Y   SEPARATE ILLUSTRATION
 

#UE0357200047
 

6L-1798: FUEL PUMP HOUSING AND GOVERNOR GROUP

6L1798 FUEL PUMP HOUSING AND GOVERNOR GROUP
Serial No. 82B196 to 82B198 inclusive. 7L5444 Governor and
5S5088 Pump Housing parts are shown on Pages 34F, 35 and 36C
c120345 UE035720
6L1798 FUEL PUMP HOUSING AND GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your D330B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8M-9064 H [4] SHIM (.064" Thick)  
  8M-9065 H [5] SHIM (.002" Thick)  
  8M-9066 H [4] SHIM (.010" Thick)  
  9M-6523 H [1] SHIM (.030" Thick)  
  4F-7957 H [2] BOLT  
  9M-6292 H [1] LOCK  
  8M-9068 H [1] BAR  
  8M-9062 H [1] RETAINER  
  8M-9140 [1] SPRING  
  8H-9223 [1] GASKET  
  7L-5444 Y [1] GOVERNOR GROUP  
    (See Separate Illustration)
  5S-5088 Y [1] FUEL INJECTION PUMP GROUP  
    (See Separate Illustration)
  0S-1618 [3] BOLT  
  3B-4505 [3] LOCKWASHER  
  2B-2694 [2] BOLT  
  1D-4716 [2] NUT  
  3B-4505 [2] LOCKWASHER  
  H   NOT PART OF FUEL PUMP HOUSING
  Y   SEPARATE ILLUSTRATION
 

#UE0357200048
 

3L-5665: SERVICE METER

SERVICE METER (3L5665 N/S)
c129746 UE035720
3L5665 SERVICE METER Parts scheme
  For full view, you need register

Parts for your D330B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9H-6761 [1] SEAL  
  0S-1615 [2] BOLT  
  9M-2382 [1] KIT  
    (SERVICE METER WINDOW - NOT PART OF SERVICE METER)
  5S-9086 [1] SERVICE METER  
 

#UE0357200049
 

7L-3354: FUEL PUMP HOUSING AND GOVERNOR

FUEL PUMP HOUSING AND GOVERNOR (7L3354 N/S)
Serial No. 82B199-Up
7L5444 Governor & 5L4164 Pump parts are shown on Pages 34F, 35 & 36D
c120702 UE035720
7L3354 FUEL PUMP HOUSING AND GOVERNOR Parts scheme
  For full view, you need register

Parts for your D330B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8M-9064 [4] SHIM (.064" Thick)  
  8M-9065 [5] SHIM (.002" Thick)  
  8M-9066 [4] SHIM (.010" Thick)  
  9M-6523 [1] SHIM (.030" Thick)  
  4F-7957 [2] BOLT  
  9M-6292 [1] LOCK  
  8M-9068 [1] BAR  
  8M-9062 [1] RETAINER  
  8M-9140 [1] SPRING  
  7L-5444 Y [1] GOVERNOR GROUP  
    (See Separate Illustration)
  5S-4164 Y [1] FUEL INJECTION PUMP GROUP  
    (See Separate Illustration)
  0S-1618 [3] BOLT  
  3B-4505 [3] LOCKWASHER  
  8H-9223 [1] GASKET  
  1B-9575 [2] BOLT  
  3B-4505 [2] LOCKWASHER  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Rod Bearings For Parts Service Have Reliefs (Grooves) Cut On The Outside Diameter
1979/06/20
New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material
1982/10/20
New Main And Connecting Rod Bearings Have A Thicker Layer Of Lead-Tin Overlay (Surface Material)
1982/10/20
Installation Of Zinc Rods In Caterpillar Marine Engines
1991/01/01
New Guidelines for Inspecting Pistons {1214}
2006/01/02
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Magazine
New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/10/04
New Main And Connecting Rod Bearings Have A Thicker Layer Of Lead-Tin Overlay (Surface Material){1230,1203,1219}
1982/10/11
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
Rod Bearings For Parts Service Have Reliefs (Grooves) Cut On The Outside Diameter{1219}
1979/05/21
Installation Of Zinc Rods In Caterpillar Marine Engines{1350,1388}
1990/12/24

Caterpillar Parts SIS Catalog D330B :

GASKET KITS
GASKET KITS
FLYWHEEL
FLYWHEEL
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT BEARING REPLACEMENT GROUPS
CRANKSHAFT
CRANKSHAFT
CYLINDER BLOCK ASSEMBLY
5S-4120 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK ASSEMBLY
6L-6216 CYLINDER BLOCK ASSEMBLY
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
CYLINDER BLOCK AND COVERS
ENGINE BALANCER
6L-3465 ENGINE BALANCER
CONNECTING ROD AND PISTON
9L-2368 CONNECTING ROD AND PISTON
CAMSHAFT
CAMSHAFT
ACCESSORY DRIVE
ACCESSORY DRIVE
FUEL PUMP HOUSING AND GOVERNOR GROUP
6L-1798 FUEL PUMP HOUSING AND GOVERNOR GROUP
FUEL PUMP HOUSING AND GOVERNOR GROUP
6L-1798 FUEL PUMP HOUSING AND GOVERNOR GROUP
FUEL PUMP HOUSING AND GOVERNOR GROUP
6L-1798 FUEL PUMP HOUSING AND GOVERNOR GROUP
SERVICE METER
3L-5665 SERVICE METER

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.